Customs tariff code 7017.10.00: Of fused quartz or other fused silica
Reference data as at 24 July 2026
Customs tariff code 7017.10.00 covers Of fused quartz or other fused silica. The third-country duty rate is 3 %, plus import VAT.
7017.10.00 is CN code in the EU customs tariff, in chapter 70. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7017.10.00
- Third-country duty
- 3 %
- Declarable
- No
- Binding rulings
- 2
Where this code sits in the tariff
From HS code to customs tariff code 7017.10.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3 % | MFN |
| Algeria | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0018Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Glasware für Laboratorien, sog. Stable Sample Introduction System (SSI), Foto siehe Anlage, - bestehend aus zwei miteinander verschweißten, spezifisch geformten Sprühkammern (sog. Zyklon- und Scottsprühkammer) aus lt. Antrag Quarzglas (geschmolzenem Quarz) und Gasanschlüssen aus lt. Antrag Kunststoff, - die Sprühkammern dienen zum Aufbereiten von flüssigen Proben für Massenspektrometer durch ein feines Zerstäuben der Probenflüssigkeit, - die Sprühkammern aus Glas verleihen der Ware aufgrund des Verwendungszwecks den wesentlichen Charakter, - zum Einbau in einem Massenspektrometer bestimmt, - stellt sich als Glasware für Laboratorien dar, die gemäß Anmerkung 1 c) zu Kapitel 84 bzw. Anmerkung 1 e) zu Kapitel 90 in die Position 7017 einzureihen ist. "Glasware für Laboratorien, aus geschmolzenem Quarz"
Glaswaren für Laboratorien, sog. NMR Sample Tubes (Meßröhrchen), - lt. Antrag aus Quarzglas (geschmolzenem Quarz oder anderem Siliciumoxid), - in unterschiedlichen Durchmessern und Längen, - ohne Verschlußstopfen, Skalen oder Eichzeichen, - dazu bestimmt, in einem Spektrometer als Analyseröhrchen verwendet zu werden, - zum Zeitpunkt der Einfuhr keine Verbindung mit anderen Stoffen gegeben und die Analyseröhrchen sind nicht zum Einbau oder zur festen Montage bestimmt.
Notes that govern this classification
Zu Unterposition 7017 1000 Die Waren dieser Unterposition haben einen Gehalt an Siliciumdioxid von 99 GHT oder mehr. Ausgangsstoffe für Waren dieser Art sind sehr reiner Quarzsand, Bergkristall oder flüchtige Siliciumverbindungen. Die aus Quarzsand hergestellten Glaswaren sind lichtundurchlässig oder nur durchscheinend. Die aus Bergkristall oder flüchtigen Siliciumverbindungen hergestellten Waren sind dagegen vollkommen klar und durchsichtig.
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg (4. Senat) vom 24. November 2017 in den RS 4 K 36/15 Tatbestand: Die Beteiligten streiten über die zolltarifliche Einreihung eines in der Massenspektrometrie verwendeten gläsernen Probenzerstäubers. Die Klägerin beantragte am … die Erteilung einer verbindlichen Zolltarifauskunft (vZTA) für einen gläsernen Probenzerstäuber „Concentric Nebulizer“. Der Nebulizer besteht aus einem röhrenförmigen Körper aus Glas mit einem Anschluss für eine Kapillare aus Kunststoff für die Zufuhr von Probenflüssigkeit sowie mit einem Anschluss für eine Druckgaszufuhr und dient dazu Probenflüssigkeiten durch die Zufuhr von Gas in eine Zerstäuberkammer zu zerstäuben. In der Mitte des Glaskörpers befindet sich ein gläsernes Rohr mit der Probenflüssigkeit. …
1. Zu Kapitel 70 gehören nicht: a) Waren der Position 3207 (z. B. Schmelzglasuren und andere verglasbare Massen, Glasfritten, anderes Glas in Form von Pulver, Granalien oder Flocken) (RV E7001A00); b) Waren des Kapitels 71 (z. B. Fantasieschmuck) (RV E7001B00); c) Kabel aus optischen Fasern der Position 8544, elektrische Isolatoren (Position 8546) oder Isolierteile der Position 8547 (RV E7001C00); d) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, gerahmt, für Fahrzeuge der Kapitel 86 bis 88 (RV E7001D00); e) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, auch gerahmt, mit Heizvorrichtungen oder anderen elektrischen oder elektronischen Vorrichtungen ausgerüstet, für Kraftfahrzeuge der Kapitel 86 bis 88 (RV E7001E00); f) optische Fasern, optisch bearbeitete optische Elemente, Injektionsspritzen, künstliche Augen, Thermometer, Barometer, Dichtem …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7017.10.00 cover?
Code 7017.10.00 covers Of fused quartz or other fused silica. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7017.10.00?
The third-country duty rate for 7017.10.00 is 3 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7017.10.00?
The first six digits form the HS code: 701710. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7017.10.00 have?
7017.10.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7017.10.00 sit in the tariff?
7017.10.00 sits in this hierarchy: 70 GLASS AND GLASSWARE > 7017 Laboratory, hygienic or pharmaceutical glassware, whether or not graduated or calibrated > 701710 Of fused quartz or other fused silica. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7017.10.00?
Yes. The EBTI database holds decisions on 7017.10.00, for example DE17164/11-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7017.10.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7017.10.00 to 0018. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7017.10.00 change?
7017.10.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.