Customs tariff code 7305.31.00.00: Longitudinally welded
Reference data as at 1 July 2026
Customs tariff code 7305.31.00.00 covers Longitudinally welded. The third-country duty rate is 0 %, plus import VAT.
7305.31.00.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7305.31.00.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 7
Where this code sits in the tariff
From HS code to customs tariff code 7305.31.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Dle poskytnutých údajů se jedná o rovnou trubka složnou z médionosné svařované nelegované trubky, tvrdé polyurethanové izolační pěny a polyethylenové plášťové trubky. Potrubní systém se používá pro bezkanálové rozvody horké a teplé vody. Potrubní systém může být tvořen z trubek v délce 6 a 12 m. Materiál: trubka z nelegované oceli (jakost P235GH), izolační pěna a polyethylenový plášť trubky. Svařované trubky se vyrábějí tvářením (zkroužením) ocelových pásů (svitků) do kruhového tvaru a následným spojením jejich okrajů (okraje se zahřejí průchodem proudu a následně se k sobě přitlačí), její průměr přesahuje 406,4 mm.
Tubo cilindrico. Secondo quanto dichiarato, la merce si ottiene da materiale di acciaio con processo di taglio, mediante macchine al plasma o pantografi, e successiva calandratura e saldatura longitudinale, non ha imballaggio specifico e si presenta esteticamente in maniera grezza. Il diametro esterno può variare da 680mm a 880 mm mentre la lunghezza è variabile. Successivamente all’importazione, Il tubo è sottoposto ad altre lavorazioni con lo scopo di trasformarlo in tubi da rivestimento.
Rohre aus Stahl Bei den Waren handelt es sich nach den Angaben um geschweißte Rohre aus kaltgewalztem, nicht rostendem Stahl (AISI 304 u.a.) in Längen von 1200 mm und Durchmessern von 407 mm bis 600 mm. Die Rohre sind an der Innenseite mit Teflon beschichtet und weisen an beiden Enden Flanschanschlüsse auf. Die Erzeugnisse werden in Entlüftungsanlagen verbaut. Die Waren sind als "andere Rohre, geschweißt mit kreisförmigem Querschnitt und einem äußeren Durchmesser von mehr als 406,4 mm, aus Eisen oder Stahl" in den TARIC-Code 7305 3100 00 einzureihen.
Stahlrohre Bei der Ware handelt es sich um ein zylindrisches Hohlerzeugnis mit über die gesamte Länge gleichbleibendem, kreisförmigem Querschnitt (Rohr). Das Rohr besteht den Angaben nach aus nicht legiertem Stahl (S355) und ist durch Längsnahtschweißen hergestellt worden. Die Oberfläche ist nicht bearbeitet worden. Die Ware wird in unterschiedlichen Außen- und Innendurchmessern und Längen gehandelt. Der Außendurchmesser liegt dabei zwischen 495 mm und 610 mm. Den Angaben nach wird die Ware im Maschinenbau verwendet. Die Ware wird nach ihrer stofflichen Beschaffenheit als anderes Rohr, geschweißt, mit kreisförmigem Querschnitt und einem äußeren Durchmesser von mehr als 406,4 mm, aus Eisen oder Stahl, andere, längsnahtgeschweißt, in den TARIC-Code 7305 3100 00 eingereiht.
Tuote on pituussaumalla hitsattua kaukolämpöputkea. Materiaalina on seostamaton teräs, jonka koostumus on seuraavanlainen: C maks. 0,16 %, Si maks. 0,35 %, Mn maks 0,70 %, Cr alle 0,30 %, Mo alle 0,08 %, Ni alle alle 0,30 %, Cu maks 0,30 %, Nb maks 0,01 %, Ti maks 0,04 % ja V maks 0,02 %. Putken kokoluokka on DN 500, sen ulkohalkaisija on 508 mm ja seinämävahvuus 6,3 mm.
Een stalen buis met onder andere de volgende (uiterlijke) kenmerken: - overlangs gelast; - rond profiel; - diameter ongeveer 1,42 m; - wanddikte ongeveer 16 mm; - lengte ongeveer 2 m. Bedoeld om tezamen met andere buizen een damwand te vormen.
LENGTHS OF STEEL TUBING. LONGITUDINALLY WELDED. THE EXTERNAL DIAMETER EXCEEDS 406.4MM.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Die Erläuterungen zu Pos. 7304 gelten sinngemäß.
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7305.31.00.00 cover?
Code 7305.31.00.00 covers Longitudinally welded. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7305.31.00.00?
The third-country duty rate for 7305.31.00.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7305.31.00.00?
The first six digits form the HS code: 730531. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7305.31.00.00 have?
7305.31.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7305.31.00.00 sit in the tariff?
7305.31.00.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7305 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel > 730531 Longitudinally welded. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7305.31.00.00?
Yes. The EBTI database holds decisions on 7305.31.00.00, for example CZBTI41/210399/2026-300000-ZI/01. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7305.31.00.00 covered by CBAM?
Yes. 7305.31.00.00 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7305.31.00.00?
Yes. Trade defence measures are in force on 7305.31.00.00, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7305.31.00.00 change?
7305.31.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.