Customs tariff code 7306.29.00.00: Other
Reference data as at 1 July 2026
Customs tariff code 7306.29.00.00 covers Other. The third-country duty rate is 0 %, plus import VAT.
7306.29.00.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7306.29.00.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 5
Where this code sits in the tariff
From HS code to customs tariff code 7306.29.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
L’article est un dispositif de forme tubulaire qui possède une résistance mécanique élevée qui assure une très bonne étanchéité contre un cuvelage d’un puits de pétrole ou gaz. Il permet la retenue de ciment dans les étapes de construction d’un puits. Il ne contient aucune pièce en mouvement – le produit est parfaitement statique, il se déforme lorsqu’on applique une pression hydraulique. Les fonctions principales de l'article sont de supporter le poids de la colonne perdue et d’assurer une étanchéité entre cette même colonne perdue et le cuvelage dans lequel il vient se fixer. L'article est composé de : - Une chemise en acier carbone Elastomère vulcanisé et usiné (caoutchouc nitrile hydrogénés (HNBR) ou des AFLAS) - Jupes usinées en acier renforcé (acier carbone) - Bagues d’ancrage en acier renforcé (acier carbone) - Divers joints et anneaux Procédé de fabrication : La chemise déformable sera coupée puis ébauché pour ensuite être sertie aux extrémités. Cette chemise sera usinée une nouvelle fois au profil souhaité. Peuvent être ajouté le joint central avec les différents anneaux puis les bagues d’ancrages et les jupes qui sont toutes deux soudées.
Tube utilisé dans l’industrie pétrolière pour des opérations de fracturation hydraulique. Le tube se présente sous la forme d’un mandrin en acier-carbone standard fileté à ses extrémités et entouré de deux chemises expansibles en acier inoxydable et en élastomère. Il est destiné à être associé à d’autres tubes identiques pour former une colonne de cuvelage qui servira à des opérations de fracturation hydraulique (fracking). Le mandrin (le tube principal) est obtenu par laminage à chaud.
Stahlrohre Bei den Waren handelt es sich um längsnahtgeschweißte Rohre aus unlegierten Stählen mit oder ohne Gewinde an den Enden und mit einem Außendurchmesser von weniger als 165 mm in unterschiedlichen Längen. Die Rohre sind mit einem synthetischen Kautschuk beschichtet bzw. ummantelt. Die Erzeugnisse werden in der Öl- und Gas-Industrie zur Abdichtung von Bohrlöchern verwendet, wobei die Kautschukbeschichtung im direkten Kontakt mit Wasser oder Öl aufquillt und das Bohrloch gegen die Umgebung abdichtet. Das Stahlrohr bestimmt den Charakter der aus verschiedenen Stoffen zusammengesetzten Ware. Eine Einreihung in das Kapitel 40 ist ausgeschlossen. Die Waren sind als "andere Rohre aus Stahl (geschweißt), Futterrohre und Steigrohre von der für das Bohren oder Fördern von Öl oder Gas verwendeten Art (casing und tubing), andere" in den TARIC-Code 7306 2900 00 einzureihen.
TYPE 4 HIGH STRENGTH LOW ALLOY (HSLA) STEEL TUBING. WELDED. TUBING FOR THE OIL AND GAS INDUSTRIES. COMES ON REELS.
TYPE 4 HIGH STRENGTH LOW ALLOY (HSLA) STEEL TUBING. WELDED. TUBING FOR THE OIL AND GAS INDUSTRIES. COMES ON REELS.
Notes that govern this classification
Zu Unterpositionen 7306 11, 7306 19, 7306 21 und 7306 29: Die Erläuterungen zu den Unterpositionen 7304 11, 7304 19, 7304 22, 7304 23, 7304 24 und 7304 29 gelten sinngemäß für diese Unterpositionen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 707/2013 Kommission vom 23. Juli 2013 ABl. EU Nr. L 200/8) (RV L 707/13) Geschweißte Rohre aus nicht legiertem Stahl mit kreisförmigem Querschnitt, mit einer Länge von 3 oder 6 m, einer Wanddicke von 2,6 bis 3,6 mm und einem äußeren Durchmesser von 33,7 bis 114,2 mm, mit Vertiefungen an beiden Enden. Sie sind zur Verwendung als Rohre für Sprinkleranlagen bestimmt. Siehe Abbildung. Unterposition 7306 30 77 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7306, 7306 30 und 7306 30 77. Angesichts der objektiven Merkmale und Eigenschaften erfüllt die Ware die Kriterien der Position 7306. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Beschluss des Europäischen Gerichtshofs (Sechste Kammer) vom 27. Februar 2020 in der Rechtssache C-670/19 Tenor Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der durch die Verordnung (EU) Nr. 861/2010 der Kommission vom 5. Oktober 2010 geänderten Fassung ist dahin auszulegen, dass Gardinenstangen aus unedlen Metallen von der zolltariflichen Unterposition 8302 41 90 erfasst werden, sofern es sich nicht um Profile, Rohre oder Stäbe handelt, die nur auf die gewünschte Länge geschnitten wurden, und dass es Sache des vorlegenden Gerichts ist, dies zu prüfen, um die im Ausgangsverfahren in Rede stehenden Waren anhand der vom Gerichtshof in Beantwortung der ersten Vorlagefrage erteilten Hinweise selb …
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (11. Sitzung des Ausschusses für den Zollkodex vom 1. bis 3. Juli 2009): Geschweißte Rohre und Hohlprofile (z. B. geschweißt, genietet, gefalzt oder mit einfach aneinander gelegten Rändern), aus nicht rostendem Stahl der Position 7306, die nach international anerkannten Normen gehandelt werden, die eine Verwendung als Hochdruckleitung von 16 bar oder mehr beschreiben, sind als Rohre von der für Öl- oder Gasfernleitungen verwendeten Art (line pipe) in die Unterposition 7306 11 einzureihen. Diese Erzeugnisse entsprechen der Norm EN 10208-2 und den entsprechenden nationalen Normen. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7306.29.00.00 cover?
Code 7306.29.00.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7306.29.00.00?
The third-country duty rate for 7306.29.00.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7306.29.00.00?
The first six digits form the HS code: 730629. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7306.29.00.00 have?
7306.29.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7306.29.00.00 sit in the tariff?
7306.29.00.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel > 730629 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7306.29.00.00?
Yes. The EBTI database holds decisions on 7306.29.00.00, for example FRBTIFR-BTI-2025-07287. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7306.29.00.00 covered by CBAM?
Yes. 7306.29.00.00 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7306.29.00.00?
Yes. Trade defence measures are in force on 7306.29.00.00, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7306.29.00.00 change?
7306.29.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.