Customs tariff code 7306.40.80.00: Other
Reference data as at 1 July 2026
Customs tariff code 7306.40.80.00 covers Other. The third-country duty rate is 0 %, plus import VAT.
7306.40.80.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7306.40.80.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7306Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- 7306.40Other, welded, of circular cross-section, of stainless steel
- 7306.40.80Other
- 7306.40.80.00Other
From HS code to customs tariff code 7306.40.80.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C116Maraging steels, useable in 'missiles', having all of the following:
- 1C118Titanium-stabilised duplex stainless steel (Ti-DSS) having all of the following:
- 1C216Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1950 MPa or more, at 293 K (20 °C).
- 2B350hChemical manufacturing facilities, equipment and components, as follows:
- 2B350hChemical manufacturing facilities, equipment and components, as follows:
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Tubi saldati in acciaio inossidabile, a sezione trasversale circolare costante e struttura concentrica lungo tutta la lunghezza. I tubi presentano un diametro esterno compreso tra 6 mm e 323,9 mm, uno spessore delle pareti variabile da 1 mm a 6 mm e una lunghezza da 1 metro fino a 12 metri. Dall’esame di laboratorio effettuato dall’Agenzia delle Dogane e dei Monopoli (ADM) sul campione fornito è emerso che i tubi sono ottenuti mediante formatura e saldatura longitudinale di prodotto laminato piatto in acciaio inossidabile, seguita da una lavorazione meccanica di finitura superficiale mediante abrasione (spazzolatura). La saldatura risulta continua lungo l’asse longitudinale del tubo. Allo stato dell’importazione, i tubi non presentano ulteriori lavorazioni né elementi che ne determinino una funzione specifica diversa da quella propria di tubi in acciaio inossidabile. Sulla base delle informazioni fornite, i prodotti sono suscettibili di utilizzo in diversi ambiti applicativi, quali, a titolo esemplificativo, edilizia, impiantistica generale, trattamento delle acque, settori industriali, settore agroalimentare e zootecnico.
D’après les informations fournies, tubes de section circulaire soudés en acier inoxydable poli destinés à être utilisé pour la fabrication ou l'assemblage de racks, mobilier de magasin, chariot de préparation de commande. Diamètre 27.7mm, 25.5mm. Conditionnés par lot de 10 puis placé dans un conteneur.
Tubes de section circulaire et soudés, en acier inoxydable. Ils ne sont ni étirés ni laminés à froid. Les tubes sont utilisés comme boîtier extérieur pour transporter les câbles électriques dans le cadre de la fabrication de thermocouples à isolation minérale. Dimensions : 12m de long, 0.25cm d’épaisseur, 2.6cm de circonférence.
Rohr aus nicht rostendem Stahl Bei der Ware handelt es sich um ein zylindrisches Hohlerzeugnis aus nicht rostendem Stahl mit einem kreisrunden Querschnitt. Das Erzeugnis ist an einem Ende um 90° gebogen und kann in verschiedenen Längen vorliegen, wobei die Länge die größte äußere Querschnittsabmessung mehr als zweimal überschreitet (Rohr). Das gebogene Rohr ist geschweißt und wird in der technischen Gebäudeausrüstung in ungewöhnlichen Einbausituationen verwendet. Die Ware ist als andere Rohre und Hohlprofile (z. B. geschweißt, genietet, gefalzt oder mit einfach aneinander gelegten Rändern), aus Eisen oder Stahl, andere, geschweißt, mit kreisförmigem Querschnitt, aus nicht rostendem Stahl, andere, in den TARIC-Code 7306 4080 00 einzureihen.
Rohre aus nicht rostendem Stahl Bei der Ware handelt es sich um zylindrische Hohlerzeugnisse aus nicht rostendem Stahl mit einem kreisrunden Querschnitt. Die Erzeugnisse sind an beiden Enden gebogen und können in verschiedenen Längen vorliegen, wobei die Länge die größte äußere Querschnittsabmessung mehr als zweimal überschreitet (Rohr). Die Rohre sind geschweißt und dienen in der technischen Gebäudeausrüstung zur Überspringung von kreuzenden Leitungen. Die Ware ist als andere Rohre und Hohlprofile (z. B. geschweißt, genietet, gefalzt oder mit einfach aneinander gelegten Rändern), aus Eisen oder Stahl, andere, geschweißt, mit kreisförmigem Querschnitt, aus nicht rostendem Stahl, andere, in den TARIC-Code 7306 4080 00 einzureihen.
Ferrule coudée en acier inoxydable avec soudure, d’une longueur de 12cm, d’un diamètre de 11mm, angle à 169°, poids : 25 gr. Elle permet de réparer le jonc d’une tente et de rendre l’armature à nouveau rigide.
Tube de section circulaire en acier inoxydable, avec soudure et d’un diamètre intérieur de 6,9 mm à 8,5 mm. Il est destiné à remplacer la ferrule de réduction 8,5 à 6,9 mm d’une tente. Dimension : 5 cm de long, 1 cm de large, 1 cm de haut.
Tube de section circulaire en acier inoxydable, avec soudure, d’un diamètre intérieur de 6,9 mm. Il est destiné à remplacer la ferrure d’origine du jonc d’une tente. Dimension : 5cm de long, 1 cm de large et 1 cm de haut.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 707/2013 Kommission vom 23. Juli 2013 ABl. EU Nr. L 200/8) (RV L 707/13) Geschweißte Rohre aus nicht legiertem Stahl mit kreisförmigem Querschnitt, mit einer Länge von 3 oder 6 m, einer Wanddicke von 2,6 bis 3,6 mm und einem äußeren Durchmesser von 33,7 bis 114,2 mm, mit Vertiefungen an beiden Enden. Sie sind zur Verwendung als Rohre für Sprinkleranlagen bestimmt. Siehe Abbildung. Unterposition 7306 30 77 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7306, 7306 30 und 7306 30 77. Angesichts der objektiven Merkmale und Eigenschaften erfüllt die Ware die Kriterien der Position 7306. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Beschluss des Europäischen Gerichtshofs (Sechste Kammer) vom 27. Februar 2020 in der Rechtssache C-670/19 Tenor Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der durch die Verordnung (EU) Nr. 861/2010 der Kommission vom 5. Oktober 2010 geänderten Fassung ist dahin auszulegen, dass Gardinenstangen aus unedlen Metallen von der zolltariflichen Unterposition 8302 41 90 erfasst werden, sofern es sich nicht um Profile, Rohre oder Stäbe handelt, die nur auf die gewünschte Länge geschnitten wurden, und dass es Sache des vorlegenden Gerichts ist, dies zu prüfen, um die im Ausgangsverfahren in Rede stehenden Waren anhand der vom Gerichtshof in Beantwortung der ersten Vorlagefrage erteilten Hinweise selb …
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (11. Sitzung des Ausschusses für den Zollkodex vom 1. bis 3. Juli 2009): Geschweißte Rohre und Hohlprofile (z. B. geschweißt, genietet, gefalzt oder mit einfach aneinander gelegten Rändern), aus nicht rostendem Stahl der Position 7306, die nach international anerkannten Normen gehandelt werden, die eine Verwendung als Hochdruckleitung von 16 bar oder mehr beschreiben, sind als Rohre von der für Öl- oder Gasfernleitungen verwendeten Art (line pipe) in die Unterposition 7306 11 einzureihen. Diese Erzeugnisse entsprechen der Norm EN 10208-2 und den entsprechenden nationalen Normen. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7306.40.80.00 cover?
Code 7306.40.80.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7306.40.80.00?
The third-country duty rate for 7306.40.80.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7306.40.80.00?
The first six digits form the HS code: 730640. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7306.40.80.00 have?
7306.40.80.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7306.40.80.00 sit in the tariff?
7306.40.80.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel > 730640 Other, welded, of circular cross-section, of stainless steel > 73064080 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7306.40.80.00?
Yes. The EBTI database holds decisions on 7306.40.80.00, for example ITBTI2025-0908. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7306.40.80.00 covered by CBAM?
Yes. 7306.40.80.00 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7306.40.80.00?
Yes. Trade defence measures are in force on 7306.40.80.00, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Is 7306.40.80.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7306.40.80.00 to 1C116, 1C118, 1C216, 2B350h, 2B350h. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7306.40.80.00 change?
7306.40.80.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.