Customs tariff code 7306.61.92.00: With a wall thickness not exceeding 2 mm
Reference data as at 1 July 2026
Customs tariff code 7306.61.92.00 covers With a wall thickness not exceeding 2 mm. The third-country duty rate is 0 %, plus import VAT.
7306.61.92.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7306.61.92.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7306Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- 7306.61Of square or rectangular cross-section
- 7306.61.92With a wall thickness not exceeding 2 mm
- 7306.61.92.00With a wall thickness not exceeding 2 mm
From HS code to customs tariff code 7306.61.92.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Countries subject to safeguard measures | 25 % | All other companies | Regulation 0159/19 | 2026-06-30 |
| ERGA OMNES | 50 % | All other companies | REGULATION R1457/26 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Jeklene vzdolžno varjene cevi, pocinkane in prevlečene s plastično maso s kvadratnim ali pravokotnim prečnim prerezom. Cevi različnih dimenzij (60x40 mm, 80x80 mm, 60x60 mm, 100x120 mm...), z debelino stene od 1,5 do 2 mm in različnih dolžin (na primer 2,5 m) je potrebno pred uporabo še odrezati na določeno dolžino. Uporabljajo se za postavitev panelnih ograj. Uporablja se za postavitev panelnih ograj.
THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A NON-CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH. WITH A WALL THICKNESS NOT EXCEEDING 2MM, MAXIMUM CROSS SECTION DIMENSION 40X40CM, LENGTH 20M.
PROFILATO CAVO ELETTROSALDATO A SEZIONE QUADRATA O RETTANGOLARE ESTRUSO A FREDDO IN FERRO.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 707/2013 Kommission vom 23. Juli 2013 ABl. EU Nr. L 200/8) (RV L 707/13) Geschweißte Rohre aus nicht legiertem Stahl mit kreisförmigem Querschnitt, mit einer Länge von 3 oder 6 m, einer Wanddicke von 2,6 bis 3,6 mm und einem äußeren Durchmesser von 33,7 bis 114,2 mm, mit Vertiefungen an beiden Enden. Sie sind zur Verwendung als Rohre für Sprinkleranlagen bestimmt. Siehe Abbildung. Unterposition 7306 30 77 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7306, 7306 30 und 7306 30 77. Angesichts der objektiven Merkmale und Eigenschaften erfüllt die Ware die Kriterien der Position 7306. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Beschluss des Europäischen Gerichtshofs (Sechste Kammer) vom 27. Februar 2020 in der Rechtssache C-670/19 Tenor Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der durch die Verordnung (EU) Nr. 861/2010 der Kommission vom 5. Oktober 2010 geänderten Fassung ist dahin auszulegen, dass Gardinenstangen aus unedlen Metallen von der zolltariflichen Unterposition 8302 41 90 erfasst werden, sofern es sich nicht um Profile, Rohre oder Stäbe handelt, die nur auf die gewünschte Länge geschnitten wurden, und dass es Sache des vorlegenden Gerichts ist, dies zu prüfen, um die im Ausgangsverfahren in Rede stehenden Waren anhand der vom Gerichtshof in Beantwortung der ersten Vorlagefrage erteilten Hinweise selb …
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (11. Sitzung des Ausschusses für den Zollkodex vom 1. bis 3. Juli 2009): Geschweißte Rohre und Hohlprofile (z. B. geschweißt, genietet, gefalzt oder mit einfach aneinander gelegten Rändern), aus nicht rostendem Stahl der Position 7306, die nach international anerkannten Normen gehandelt werden, die eine Verwendung als Hochdruckleitung von 16 bar oder mehr beschreiben, sind als Rohre von der für Öl- oder Gasfernleitungen verwendeten Art (line pipe) in die Unterposition 7306 11 einzureihen. Diese Erzeugnisse entsprechen der Norm EN 10208-2 und den entsprechenden nationalen Normen. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7306.61.92.00 cover?
Code 7306.61.92.00 covers With a wall thickness not exceeding 2 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7306.61.92.00?
The third-country duty rate for 7306.61.92.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7306.61.92.00?
The first six digits form the HS code: 730661. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7306.61.92.00 have?
7306.61.92.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7306.61.92.00 sit in the tariff?
7306.61.92.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel > 730661 Of square or rectangular cross-section > 73066192 With a wall thickness not exceeding 2 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7306.61.92.00?
Yes. The EBTI database holds decisions on 7306.61.92.00, for example SIBTI2025/0085. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7306.61.92.00 covered by CBAM?
Yes. 7306.61.92.00 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is there an anti-dumping duty on 7306.61.92.00?
Yes. Trade defence measures are in force on 7306.61.92.00, covering origin Countries subject to safeguard measures, ERGA OMNES. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 7306.61.92.00 change?
7306.61.92.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.