Customs tariff code 7310.21.91.00: Less than 0,5 mm
Reference data as at 1 July 2026
Customs tariff code 7310.21.91.00 covers Less than 0,5 mm. The third-country duty rate is 2.7 %, plus import VAT.
7310.21.91.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7310.21.91.00
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7310Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
- 7310.21Cans which are to be closed by soldering or crimping
- 7310.21.91Less than 0,5 mm
- 7310.21.91.00Less than 0,5 mm
From HS code to customs tariff code 7310.21.91.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A006bEquipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Метален контейнер тип консерва, празен, с метално дъно и алуминиева капачка, с прикрепен пръстен, който улеснява издърпването на капачката по предварително маркирани очертания (easy open aluminium cap). Външният диаметър на контейнера е 67 мм (+/- 0.10 мм), височината е 69 мм дебелината е 0.19 мм. Представя се в пълноцветен печат - CMYK. Използва се за изработката на ароматизатори тип консерва. Според информацията от заявителя, консервата е стоманена - бяло тенеке, с антикорозионно покритие. Капачката е изработена от алуминиева сплав.
Container made of Steel and coated with Tin. The Container is empty at the point of import. The Container will be filled with various chocolates & then sold to various Markets.
ENSEMBLE DE MARCHANDISES CONDITIONNE POUR LA VENTE AU DETAIL, COMPOSE DE : - UNE BOITE DE FORME PARALLELEPIPEDIQUE, AUX ANGLES ARRONDIS, EN POLYPROPYLENE, MUNIE D’UN AUTOCOLLANT IMPRIME EN POLYACRYLATE ET POLYCHLORURE DE VINYLE PLASTIFIE. - UN JEU DE CARTES EN CARTON. - UNE GOURDE CYLINDRIQUE EN ACIER INOXYDABLE RECOUVERT DE VERNIS POLYESTER, DE CONTENANCE 400ML, AVEC BOUCHON. CE RTC NE REPREND QUE LA GOURDE CYLINDRIQUE, LES AUTRES ARTICLES FAISANT L'OBJET D'UN CLASSEMENT SEPARE.
A ROUND EMPTY TIN WITH LID OF TIN PLATED STEEL OF A THICKNESS OF 0.23 MM. THE LID HAS TWO EYES THAT WOBBLE WHEN THE TIN IS SHAKEN. THE TIN IS TO BE FILLED WITH SWEETS OR NOVELTIES.
AN EMPTY TIN OF TIN-PLATED STEEL WITH A WALL THICKNESS OF 0.23 MM. DECORATED WITH CARTOON CAR CHARACTERS.THE TIN IS TO BE FILLED WITH SWEETS OR NOVELTIES.
AN EMPTY TIN WITH LID OF TIN PLATED STEEL OF A THICKNESS OF 0.23 MM. IN THE SHAPE OF AND PAINTED TO REPRESENT A MOTOR CAR. THE TIN IS TO BE FILLED WITH SWEETS OR NOVELTIES.
Samengesteld product zijnde een blikje van onedel metaal, voorzien van een deksel van metaal en een kijkvenster van doorzichtige kunststof. Het product heeft een hoogte van ongeveer 8,4 cm en een diameter van circa 5,9 cm. Het wezenlijk karakter wordt bepaald door het onedele metaal (ijzer). Het blikje wordt tezamen aangeboden met een sleutelhanger, waarvoor separaat een BTI is afgegeven onder referentienummer NL-RTD-2006-001688.
EMPTY CAN USED IN THE PRODUCTION OF NON PRESSURISED SPRAYS. THIS IS A CYLINDRICAL METAL CAN 10CM LONG AND 1.5 CM IN DIAMETER. IT HAS A CAPACITY OF APPROXIMATELY 13 ML. IT IS DESIGNED TO BE CLOSED BY CRIMPING. THE METAL IS LESS THAN 0.5 MM THICK.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Während zu der vorhergehenden Position Behälter gehören, die ein Fassungsvermögen von mehr als 300 l haben und im Allgemeinen Teil ortsfester Einrichtungen (für Lager oder dergleichen) von Industrieunternehmen usw. sind, gehören zu dieser Position ausschließlich Behälter mit einem Fassungsvermögen von 300 l oder weniger, die üblicherweise im Handelsverkehr zum Transport und zur Verpackung von Waren verwendet werden und die leicht transportierbar sind, sowie gewisse Behälter, die fest installiert werden. Größere Behälter dieser Art werden zum Transport und zur Verpackung von Erzeugnissen wie Teer, Pflanzen- und Mineralöle, Milch, Alkohol, Latex, Aetznatron, Calciumcarbid und andere chemische Erzeugnisse, Farbstoffe usw. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 757/2014 der Kommission vom 10. Juli 2014 (ABl. EU Nr. L 207/1) (RV L 757/14) Ein Kasten aus Stahl mit Abmessungen von etwa 22,5 × 16,5 × 5,5 cm, einer Wanddicke von mehr als 0,5 mm und einem Fassungsvermögen von weniger als 50 l. Der Kasten verfügt über einen Deckel, der mit Hilfe von Scharnieren an ihm befestigt ist, und einen Verschluss an der gegenüberliegenden Seite der Scharniere. Auf der Seite des Verschlusses ist an der Ware ein Griff angebracht. Deckel und Unterseite des Kastens sind mit reliefartigen Bildern von Keksen und Comic-Zeichnungen von Tieren versehen. Im Inneren des Kastens sind keine Vorrichtungen angebracht. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7310.21.91.00 cover?
Code 7310.21.91.00 covers Less than 0,5 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7310.21.91.00?
The third-country duty rate for 7310.21.91.00 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7310.21.91.00?
The first six digits form the HS code: 731021. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7310.21.91.00 have?
7310.21.91.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7310.21.91.00 sit in the tariff?
7310.21.91.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7310 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment > 731021 Cans which are to be closed by soldering or crimping > 73102191 Less than 0,5 mm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7310.21.91.00?
Yes. The EBTI database holds decisions on 7310.21.91.00, for example BGBTIBG009999-2025-BTI56. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7310.21.91.00 covered by CBAM?
Yes. 7310.21.91.00 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is 7310.21.91.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7310.21.91.00 to 1A006b. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7310.21.91.00 change?
7310.21.91.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.