Customs tariff code 7317.00.20.00: Nails in strips or coils
Reference data as at 1 July 2026
Customs tariff code 7317.00.20.00 covers Nails in strips or coils. The third-country duty rate is 0 %, plus import VAT.
7317.00.20.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7317.00.20.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7317Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
- 7317.00Stifte, Nägel, Reißnägel, Krampen, gewellte oder abgeschrägte Klammern (ausgenommen Klammern der Position 8305) und ähnliche Waren, aus Eisen oder Stahl, auch mit Kopf aus anderen Stoffen, ausgenommen mit Kopf aus Kupfer
- 7317.00.20Nails in strips or coils
- 7317.00.20.00Nails in strips or coils
From HS code to customs tariff code 7317.00.20.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Brad nails are thin and small nails made from 16 gauge wire, and the finish is galvanised. Straight brad nails go into straight nailer gun, and angled brad nails go into angled nailer gun. Brad nails are primarily used for indoor applications in woodworking, particularly for attaching trim, molding, and decorative pieces where a clean, finished look is desired. Sizes are 32mm/ 38mm/ 45mm/ 51mm/ 64mm for the angled brad nails, and 25mm/ 32mm /38mm/ 45mm/ 50mm/ 63mm for the straight brad nails. They are made from 16 gauge wire, and the finish is galvanised
Es handelt sich um Nägel aus Stahldraht mit zugespitztem Schaft und mit Kopf mit kreisrundem Umriss, dessen Unterseite zum Schaft hin gerundet ist. Die sog. Hochleistungsnägel werden mittels eines Direktbefestigungsgeräts (nicht Gegenstand dieser vZTA) zur Befestigung in Beton oder Stahl verwendet. Jeweils zwölf Stück sind mittels einer länglichen Einfassung aus Kunststoff zusammenhängend in einem Streifen magaziniert. Querschnitt (Schaft): etwa 3 mm; Durchmesser (Kopf): etwa 6,5 mm. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Nägel aus Stahldraht, zusammenhängend in Streifen" zum TARIC-Code 7317 0020 00.
Es handelt sich um Nägel (Gesamtlänge: etwa 25 mm) aus verzinktem Stahldraht mit Kopf, glattem Schaft und zugespitztem Ende. Die Erzeugnisse sind in Streifen zusammenhängend und kommen in Druckluft-Tackern zum Einsatz. Sie sind geeignet z. B. für Renovierungsarbeiten wie beim Reparieren von Zäunen und Rankbefestigungen, beim Bau von Gartenhäuschen und Hochbeeten oder bei der Befestigung von Sockelleisten. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzugnisse gehören als "Nägel aus Stahldraht, zusammenhängend in Streifen" zum TARIC-Code 7317 0020 00.
FRAMING NAIL AND FUEL CELL - PACKED AND IMPORTED AS A SET. THE NAILS ARE MADE FROM STEEL. THEY ARE COLD DRAWN FROM WIRE ROD.
Dle údajů žadatele a předloženého vzorku se jedná o hřebíky v pásech, vyrobené lisováním za studena. Funkce: Hřebíky, navzájem spojené měkkým měděným drátem, jsou určeny pro použití v pneumatických kladivech. Jsou protikorozně ošetřené lakováním metodou ponoření do impregnačního laku. Rozměry vzorku: 2,8 x 80 mm, hmotnost cca 30g. Balení: 5000 ks/karton, váha kartonu cca 20 kg.
D HEAD GALVANISED STEEL NAILS IN A PAPER STRIP. FOR USE IN GAS NAIL GUN
DRIVE PIN NAIL IN A PLASTIC STRIP. MADE FROM COLD PRESSED STEEL WIRE. FOR USE IN HIGH IMPACT NAILING MACHINE.
Een samengesteld werk, zijnde een zogenaamde "nail in anchor" bestaande uit een draadnagel die vastgezet is in een plug. Beide delen zijn vervaardigd van ijzer of staal, bezitten een kop en hebben een lengte van ongeveer 4 cm. De draadnagel wordt gebruikt om onder andere lichte materialen aan beton te bevestigen door middel van een hamerslag op het uitstekende deel van de kop. Het wezenlijk karakter van het samengestelde artikel wordt bepaald door de draadnagel.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Position umfasst: A) Stifte, Nägel und ähnliche Waren aller Art, die hauptsächlich durch folgende Verfahren hergestellt werden: 1) Kaltpressen aus Draht der gewünschten Stärke. Die durch dieses Verfahren hergestellten Erzeugnisse (sog. Drahtstifte) haben einen flachen oder gewölbten Kopf; jedoch stellt man auch Stifte ohne Kopf her, die an einem oder beiden Enden zugespitzt sind. Man kann auch durch schräges Abschneiden des Schaftes Nägel mit zugespitztem Schaft herstellen. 2) Schmieden von Hand oder mit der Maschine. Bei diesem Verfahren wird ein Eisenschaft von vorbestimmter Stärke erhitzt, durch Hämmern zugespitzt, dann wird der Kopf durch Gesenkschmieden in einem Nageleisen geformt. 3) Schneiden aus Blech. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 762/2011 der Kommission vom 29. Juli 2011 (ABl. EU Nr. L 200/4) (RV L 762/11), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. L 130) (RV L 441/13): Hohle, zylinderförmige, verzinkte Ware aus anderem als rostfreiem Stahl, ohne Gewinde und mit einer Öffnung über die gesamte Länge (so genannter Expressnagel). Ein Ende ist leicht nach außen gebogen. Das andere bildet eine scharfe Schnittkante. Die Ware wird als Halterung verwendet. Sie wird in ein gebohrtes Loch eingeschlagen, um beispielsweise eine Leiste schnell an einer Betonwand zu befestigen. Durch das scharfe Ende wird das Einschlagen erleichtert. …
1. Als „Gusseisen" im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht (RV E7301000). 2. Als „Draht" im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt (RV E7302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7317.00.20.00 cover?
Code 7317.00.20.00 covers Nails in strips or coils. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7317.00.20.00?
The third-country duty rate for 7317.00.20.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7317.00.20.00?
The first six digits form the HS code: 731700. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7317.00.20.00 have?
7317.00.20.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7317.00.20.00 sit in the tariff?
7317.00.20.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7317 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper > 731700 Stifte, Nägel, Reißnägel, Krampen, gewellte oder abgeschrägte Klammern (ausgenommen Klammern der Position 8305) und ähnliche Waren, aus Eisen oder Stahl, auch mit Kopf aus anderen Stoffen, ausgenommen mit Kopf aus Kupfer > 73170020 Nails in strips or coils. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7317.00.20.00?
Yes. The EBTI database holds decisions on 7317.00.20.00, for example IEBTIIENEN004-2025-BTI378. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7317.00.20.00 change?
7317.00.20.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.