Customs tariff code 7326.19.90.00: Other
Reference data as at 1 July 2026
Customs tariff code 7326.19.90.00 covers Other. The third-country duty rate is 2.7 %, plus import VAT.
7326.19.90.00 is TARIC code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7326.19.90.00
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 73ARTICLES OF IRON OR STEEL
- 7326Other articles of iron or steel
- 7326.19Other
- 7326.19.90Other
- 7326.19.90.00Other
From HS code to customs tariff code 7326.19.90.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0016Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Dle poskytnutých údajů se jedná o kruhovou distanční podložku s jedním vnitřním a dvěma menšími otvory v jedné linii. Podložka je určena k nasazení na rotor motoru se dvěma výstupky a slouží k jeho polohování a vymezení. Výrobek je zhotoven ražením (lisováním) z plechu a poté není již dále opracován. Rozměry (mm): vnitřní průměr 20; vnější průměr 44; tloušťka materiálu 0,396.
Dle poskytnutých údajů se jedná o kruhovou distanční podložku s jedním vnitřním a dvěma menšími otvory v jedné linii. Podložka je určena k nasazení na rotor motoru se dvěma výstupky a slouží k jeho polohování a vymezení. Výrobek je zhotoven ražením (lisováním) z plechu a poté není již dále opracován. Rozměry (mm): vnitřní průměr 20; vnější průměr 44; tloušťka materiálu 0,203.
Dle poskytnutých údajů se jedná o kruhovou distanční podložku s jedním vnitřním a dvěma menšími otvory v jedné linii. Podložka je určena k nasazení na rotor motoru se dvěma výstupky a slouží k jeho polohování a vymezení. Výrobek je zhotoven ražením (lisováním) z plechu a poté není již dále opracován. Rozměry (mm): vnitřní průměr 20; vnější průměr 44; tloušťka materiálu 0,127.
Capuchon destiné à être installé sur le moyeu d’une poulie de pompe à eau (non repris dans ce RTC) pour protéger le système des éléments intrusifs de type poussières ou débris. Il est constitué d’un cœur et d’un téton en acier majoritaire, recouvert de caoutchouc. Il a été obtenu par estampage, et le caoutchouc a ensuite été moulé par dessus. Le capuchon est conditionné en vrac dans des sachets contenant plusieurs unités, eux même conditionnés en cartons.
Dle poskytnutých údajů a předložené obrazové dokumentace se jedná o ochranné víčko axiální fixace hřídele EGR ventilu. Zboží má těsnící funkci k ochraně vnitřních komponent v EGR ventilu před vnějším prostředím. Zhotoveno ražením z nerezavějící oceli.
L'article se présente sous la forme d'une bague fine et plate, avec des trous de boulons. C'est une entretoise de disque de frein en acier inoxydable estampé utilisée pour créer un espace entre le disque de frein et une roue phonique d'un capteur de vitesse. Composition - acier inoxydable – 100%. Entretoise destinée à être installée sur des vélos électriques.
Dle poskytnutých údajů se jedná o výrobek z nerezavějící oceli, zhotovený lisováním. Výrobek se používá jako podpůrná konstrukce v topném tělese elektrovozidla. Zboží je ve tvaru mřížky.
Dle deklarovaných údajů se jedná o kalíšek vyrobený z plátků nerezavějící oceli lisováním. Spolu s dalšími komponenty tvoří základ pro elektrický zažehovač utahovačů bezpečnostních pásů a nafukovačů airbagů. Na výrobu je použit materiál dle normy SUS 304, v tloušťce 0,3 a 0,4 mm.
Notes that govern this classification
Zu Unterpositionen 7326 11 und 7326 19: Die Waren dieser Unterpositionen können nach dem Schmieden folgende Bearbeitungen oder Oberflächenbearbeitungen erfahren haben: Das Beseitigen von Graten, Nähten und anderen Schmiedefehlern durch grobes Abgraten, Abschleifen, Hämmern, Schroten oder Feilen; das Beizen mit Säuren zur Beseitigung des Zunders; einfaches Reinigen mit dem Sandstrahlgebläse; grobes Vorarbeiten oder Vorschruppen oder grobes Blankscheuern sowie andere Bearbeitungen, lediglich zur Prüfung auf Fehlerfreiheit; grobes Überziehen mit Grafit, Öl, Teer, Mennige und dergleichen, das offensichtlich dazu bestimmt ist, die Gegenstände gegen Rost oder sonstige Oxydation zu schützen; Einprägen, Einstempeln, Aufdrucken usw. einfacher Aufschriften z. B. Warenzeichen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 1030/86 der Kommission vom 8. April 1986 (ABl. EG Nr. L 95/13) (RV L 1030/86), in der Fassung der Verordnung (EWG) Nr. 2080/91 der Kommission vom 16. Juli 1991 (ABl. EG Nr. L 193/6), geändert durch Verordnung (EG) Nr. 705/2005 der Kommission vom 4. Mai 2005 (ABl. EU Nr. L 118/18), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Bundefinanzhofs vom 28. Februar 2023, RS VII R 21/20 Leitsätze 1 NV: Die Voraussetzungen für eine Tarifierung von im Wesentlichen aus Stahl gefertigten Lenk- und Bockrollen unter die Codenummer 8716 90 90 90 0 sind nur dann erfüllt, wenn die aus den objektiven Wareneigenschaften erkennbare ausschließliche oder hauptsächliche Zweckbestimmung der betreffenden Teile die Verwendung für nicht selbstfahrende Fahrzeuge der Pos. 8716 KN ist. Anderenfalls unterfallen die Lenk- und Bockrollen wegen ihrer Beschaffenheit als "Andere Waren aus Eisen oder Stahl" der Codenummer 7326 90 98 90 0. 2 NV: Die Entscheidung des FG, ob ein solcher Hauptverwendungszweck erkennbar ist, stellt eine Tatsachenwürdigung dar, die das Revisionsgericht nach § 118 Abs. …
Zu Position 7326: Hierher gehören auch Spannschlösser (auch als „Spannschrauben“ bezeichnet), die beispielhaft folgendes Aussehen haben: Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes - 180. Sitzung des Ausschusses für den Zollkodex vom 3. bis 6. Juli 2017): Warenbeschreibung (Ware 1): Hängemattengestell aus Stahl, verstellbar. Es dient als Standgestell für eine Hängematte aus Stoff. Maximale Maße: 395 cm (L) x 99 cm (B) x 145 cm (H). Minimale Maße: 311 cm (L) x 99 cm (B) x 112 cm (H). Gewicht: 15 kg Einreihung: Die Ware ist in Anwendung der Allgemeinen Vorschriften 1 und 6 in die Unterposition 7326 90 98 einzureihen. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7326.19.90.00 cover?
Code 7326.19.90.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7326.19.90.00?
The third-country duty rate for 7326.19.90.00 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7326.19.90.00?
The first six digits form the HS code: 732619. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7326.19.90.00 have?
7326.19.90.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7326.19.90.00 sit in the tariff?
7326.19.90.00 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7326 Other articles of iron or steel > 732619 Other > 73261990 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7326.19.90.00?
Yes. The EBTI database holds decisions on 7326.19.90.00, for example CZBTI34/407426/2026-300000-ZI/01. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7326.19.90.00 covered by CBAM?
Yes. 7326.19.90.00 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is 7326.19.90.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7326.19.90.00 to 0016. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7326.19.90.00 change?
7326.19.90.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.