Customs tariff code 7409.11.00.00: In coils
Reference data as at 1 July 2026
Customs tariff code 7409.11.00.00 covers In coils. The third-country duty rate is 4.8 %, plus import VAT.
7409.11.00.00 is TARIC code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7409.11.00.00
- Third-country duty
- 4.8 %
- Declarable
- No
- Binding rulings
- 7
Where this code sits in the tariff
From HS code to customs tariff code 7409.11.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 4.8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Ruban conducteur plat pour modules photovoltaïques, se présentant sous la forme d’une bande plate non isolée pour l’électricité, enroulée en bobine, constituée en cuivre affiné étamé. Il est constitué d’un noyau en cuivre aplati, d’une pureté de 99,97%. Il est destiné à être utilisé comme dispositif de liaison électrique et d’interconnexion au sein des modules solaires pour connecter les chaînes de cellules solaires entre elles et à la boîte de jonction par soudure. Il n’est pas équipé de connecteurs. Il est obtenu par laminage/tréfilage du cuivre pour obtenir les dimensions souhaitées. Il présente un revêtement par soudure consistant en un étamage d’étain (à 60%) et de plomb (à 40%) (Sn-Pb). Il se présente sous deux dimensions principales : - épaisseur 0,35 mm x largeur 6 mm et épaisseur 0,35 mm x largeur 4 mm. Sa tension de fonctionnement peut atteindre 50 Volts. Il est bobiné en rouleaux.
L'article est un ruban cuivre qui protège les plantes en pots des attaques de limaces et escargots. Le ruban cuivre se colle sur les pots afin d’éviter que les limaces et escargots dévorent les plantes. L'article a une longueur de 2 mètres et une épaisseur de 23 mm. Le cuivre est enroulé sur un rouleau carton. Il a une épaisseur de 0.2 mm, 100% cuivre (pas d'alliage), le cuivre représente 45% du produit, et le rouleau papier représente 55% du produit. L'article est conditionné dans une boite cartonnée.
TINNED COPPER WIRE BRAID
TINNED COPPER FLAT WIRE, DESIGNED FOR USE WITHIN A PV SOLAR MODULE TO CONNECT CELLS. THE WIRE IS IN THE FORM OF A RECTANGULAR COPPER RIBBON THAT HAS BEEN ROLLED AND ANNEALED, 0.23 MM THICK X 6 MM WIDE. THE COPPER RIBBON IS DIPPED IN TIN TO A THICKNESS OF 40 MICRO. THE RIBBON IS PRESENTED ON SPOOLS UP TO A LENGTH OF 525M.
Kupferblech in Rollen Bei der als Kupferblech in Rollen bezeichneten Ware handelt es sich um ein massives Flacherzeugnis mit rechteckigem Querschnitt aus raffiniertem Kupfer, das in Rollen (coils) gehandelt wird. Die Dicke des Erzeugnisses beträgt ca. 0,4 mm. Die Reinheit des Kupfers wird mit 99,997% angegeben. Zolltariflich handelt es sich um ein Blech oder Band aus raffiniertem Kupfer mit einer Dicke von mehr als 0,15 mm, in Rollen.
Absorber-Streifen Bei dem Erzeugnis handelt es sich um ein Kupferband mit einer Dicke von 0,2 mm und einer Breite von 610 mm auf Rollen. Das Band Kupfer (Reinheit 99,8%) ist einseitig mit einem Nickel- und anschließend mit einem Schwarzchromüberzug galvanisch beschichtet. Verwendet wird das Erzeugnis zur Herstellung von solartechnischen Absorbern für Sonnenkollektoren. Es handelt sich um ein Band aus raffiniertem Kupfer mit einer Dicke von mehr als 0,15 mm in Rollen.
Metallband Bei der als Metallband (Teilenummer 131000110) bezeichneten Ware handelt es sich um ein kaltgewalztes, metallisches Flachmaterial aus Kupfer mit einen Zinngehalt von 0,15 GHT. Maße: Dicke 0,4 mm; Breite 24 mm. Die Ware liegt in Rollen vor. Das Bandmaterial wird zur Herstellung von Anschlussterminals für DE-Relais verwendet. Die angegebenen analytischen Daten werden als zutreffend unterstellt.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören die Erzeugnisse, die durch Anmerkung 9 d) zu Abschnitt XV definiert werden und deren Dicke mehr als 0,15 mm beträgt. Bleche und Bänder werden im Allgemeinen durch Warm- oder Kaltwalzen bestimmter Erzeugnisse der Pos. 7403 hergestellt; Bänder können auch durch Zerschneiden von Blechen hergestellt werden. Diese Waren verbleiben in dieser Position, selbst wenn sie bearbeitet (z. B. anders als quadratisch oder rechteckig zugeschnitten, gelocht, gewellt, geriffelt, gerillt, poliert, überzogen, geprägt oder an den Kanten abgerundet) sind, sofern sie durch diese Bearbeitungen nicht den Charakter von Waren erhalten haben, die von anderen Positionen erfasst werden (siehe Anmerkung 9 d) zu Abschnitt XV). Die Dickenbegrenzung von 0,15 mm schließt Überzugschichten (Lack usw.) mit ein. …
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7409.11.00.00 cover?
Code 7409.11.00.00 covers In coils. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7409.11.00.00?
The third-country duty rate for 7409.11.00.00 is 4.8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7409.11.00.00?
The first six digits form the HS code: 740911. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7409.11.00.00 have?
7409.11.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7409.11.00.00 sit in the tariff?
7409.11.00.00 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7409 Copper plates, sheets and strip, of a thickness exceeding 0,15 mm > 740911 In coils. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7409.11.00.00?
Yes. The EBTI database holds decisions on 7409.11.00.00, for example FRBTIFR-BTI-2025-08200. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7409.11.00.00 change?
7409.11.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.