Customs tariff code 7409.19.00.00: Other
Reference data as at 1 July 2026
Customs tariff code 7409.19.00.00 covers Other. The third-country duty rate is 4.8 %, plus import VAT.
7409.19.00.00 is TARIC code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7409.19.00.00
- Third-country duty
- 4.8 %
- Declarable
- No
- Binding rulings
- 7
Where this code sits in the tariff
From HS code to customs tariff code 7409.19.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 4.8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Vara kompozītie paneļi, platums: 800 mm/1000 mm/1220 mm, garums: no 1000 līdz 5000 mm. Pielietojums: fasāžu apdare, interjeru noformēšana. Paneļa sastāvs: augšējais un apakšējais slānis - rafinēta vara loksnes 0,3 mm biezumā (varš sastāvā ir vismaz 99,85 % no svara), vidējais slānis (serde) - ugunsizturīgs minerālais pildījums 3,4 mm biezumā.
Kupferplatten Bei der Ware handelt es sich um Platten aus raffiniertem Kupfer (OF-Cu, CW008A), mit einer Dicke von 10 mm. Die Platten werden durch Kaltwalzen hergestellt und zu 12 Stück gehandelt, wobei 10 Stück der Platten einer Abmessung von 695 mm x 115 mm und zwei Stück einer Abmessung von 225 mm x 125 mm aufweisen. Die Ware ist als Bleche und Bänder, aus Kupfer, mit einer Dicke von mehr als 0,15 mm, aus raffiniertem Kupfer, andere, in den TARIC-Code 7409 1900 00 einzureihen.
Dle deklarovaných údajů se jedná o měděnou fólii (tenký plech) o rozměrech 19 mm x 19 mm a tloušťce 0,2 mm. Na horní straně je výrobek opatřen nátěrem černé barvy a na spodní straně samolepící vrstvou. Čistota mědi činí nejméně 99,80 %. Výrobek je určen k odvodu ztrátového tepla procesoru.
CIGS SPUTTERING TARGETS ARE DISKS COMPOSED OF VARYING COMPOSITIONS OF THE FOLLOWING ELEMENTS:COPPER (CU)23.05%, INDIUM (IN)20.11%, GALLIUM (GA)7.36% AND SELENIUM (SE) 49.48% BUT THE COPPER ELEMENT CONTENT PREDOMINATES OVER THE OTHER INDIVIDUAL BASE METALS CONTENT. THE THICKNESS IS 4MM.
Tuote on kuparilevyä. Levyn kuparipitoisuus on vähintään 99,95 %. Sen on mitoiltaan 10x170x2010 mm.
A FLAT COPPER DISC, 6.5CM IN DIAMETER AND APPROXIMATELY 1MM THICK.
COPPER ALLOY DISK - IT IS MADE UP OF 98.9% COPPER, 1% CHROMIUM AND 0.1% ZIRCONIUM. THIS DISK HAS AN OUTSIDE DIAMETER OF 230MM AND A THICKNESS OF 11MM.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören die Erzeugnisse, die durch Anmerkung 9 d) zu Abschnitt XV definiert werden und deren Dicke mehr als 0,15 mm beträgt. Bleche und Bänder werden im Allgemeinen durch Warm- oder Kaltwalzen bestimmter Erzeugnisse der Pos. 7403 hergestellt; Bänder können auch durch Zerschneiden von Blechen hergestellt werden. Diese Waren verbleiben in dieser Position, selbst wenn sie bearbeitet (z. B. anders als quadratisch oder rechteckig zugeschnitten, gelocht, gewellt, geriffelt, gerillt, poliert, überzogen, geprägt oder an den Kanten abgerundet) sind, sofern sie durch diese Bearbeitungen nicht den Charakter von Waren erhalten haben, die von anderen Positionen erfasst werden (siehe Anmerkung 9 d) zu Abschnitt XV). Die Dickenbegrenzung von 0,15 mm schließt Überzugschichten (Lack usw.) mit ein. …
Zu Unterposition 7409 19: 1. Tafeln und Platten aus Phenol-Formaldehydharz, auf die auf einer oder beiden Seiten ein Blech, Band oder eine Folie aus raffiniertem Kupfer aufgebracht wird, zum Herstellen von so genannten gedruckten elektrischen Schaltungen, wobei das Blech, das Band oder die Folie den Charakter der Ware bestimmt (elektrischer Leiter).
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7409.19.00.00 cover?
Code 7409.19.00.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7409.19.00.00?
The third-country duty rate for 7409.19.00.00 is 4.8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7409.19.00.00?
The first six digits form the HS code: 740919. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7409.19.00.00 have?
7409.19.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7409.19.00.00 sit in the tariff?
7409.19.00.00 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7409 Copper plates, sheets and strip, of a thickness exceeding 0,15 mm > 740919 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7409.19.00.00?
Yes. The EBTI database holds decisions on 7409.19.00.00, for example LVBTILV009999-2026-BTI8. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7409.19.00.00 change?
7409.19.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.