Customs tariff code 7409.31.00: In coils
Reference data as at 1 July 2026
Customs tariff code 7409.31.00 covers In coils. The third-country duty rate is 4.8 %, plus import VAT.
7409.31.00 is CN code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7409.31.00
- Third-country duty
- 4.8 %
- Declarable
- No
- Binding rulings
- 2
Where this code sits in the tariff
From HS code to customs tariff code 7409.31.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 4.8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Bänder aus Bronze Bei der Ware handelt es sich um Bänder aus Bronze. Die Ware liegt auf Rollen vor und hat eine Dicke von 0,17 mm bis 0,6 mm und eine Breite von 4 mm bis 47 mm, wobei die Dicke immer weniger als ein Zehntel der Breite beträgt. Die Ware ist nach ihrer stofflichen Beschaffenheit als Bleche und Bänder, aus Kupfer-Zinn-Legierungen (Bronze), in Rollen, in die Unterposition 7409 3100 der Kombinierten Nomenklatur einzureihen.
Bande enroulée, constituée par un alliage de cuivre et d'étain (bronze), recouverte par un revêtement polymère. Une fois mis en forme (exemples : bague, rondelle), l'article sert à limiter la friction et l'usure de certains mécanismes (exemples : charnière d'une porte, fourche d'une bicyclette). L'article présente une teneur en étain comprise entre 5,5 % et 7 % en poids et celle en zinc s'élève à 0,2 % en poids. Il est proposé sous la forme d'une bande enroulée, d'une largeur de 193 millimètres et d'un poids de 800 kilogrammes. La bande métallique a une épaisseur totale de 1,46 millimètres et la bande d'alliage de cuivre et d'étain (bronze) de 1,15 millimètres. L'épaisseur du revêtement polymère (poudre de bronze qui sert au frittage ou d'accroche mécanique) est de 25 micromètres.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören die Erzeugnisse, die durch Anmerkung 9 d) zu Abschnitt XV definiert werden und deren Dicke mehr als 0,15 mm beträgt. Bleche und Bänder werden im Allgemeinen durch Warm- oder Kaltwalzen bestimmter Erzeugnisse der Pos. 7403 hergestellt; Bänder können auch durch Zerschneiden von Blechen hergestellt werden. Diese Waren verbleiben in dieser Position, selbst wenn sie bearbeitet (z. B. anders als quadratisch oder rechteckig zugeschnitten, gelocht, gewellt, geriffelt, gerillt, poliert, überzogen, geprägt oder an den Kanten abgerundet) sind, sofern sie durch diese Bearbeitungen nicht den Charakter von Waren erhalten haben, die von anderen Positionen erfasst werden (siehe Anmerkung 9 d) zu Abschnitt XV). Die Dickenbegrenzung von 0,15 mm schließt Überzugschichten (Lack usw.) mit ein. …
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7409.31.00 cover?
Code 7409.31.00 covers In coils. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7409.31.00?
The third-country duty rate for 7409.31.00 is 4.8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7409.31.00?
The first six digits form the HS code: 740931. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7409.31.00 have?
7409.31.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7409.31.00 sit in the tariff?
7409.31.00 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7409 Copper plates, sheets and strip, of a thickness exceeding 0,15 mm > 740931 In coils. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7409.31.00?
Yes. The EBTI database holds decisions on 7409.31.00, for example DEBTI25424/23-2. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7409.31.00 change?
7409.31.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.