Customs tariff code 7412.10.00.00: Of refined copper
Reference data as at 1 July 2026
Customs tariff code 7412.10.00.00 covers Of refined copper. The third-country duty rate is 5.2 %, plus import VAT.
7412.10.00.00 is TARIC code in the EU customs tariff, in chapter 74. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7412.10.00.00
- Third-country duty
- 5.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7412.10.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 5.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Spojovací konektor (spojka) vyrobený z rafinovanej medi. Ide o rovný dutý valcový prvok so špecifickým lemovaním s rozšíreným okrajom na jednom konci. Slúži ako spojka medzi dvoma časťami rozvodného systému.
Dle deklarovaných údajů a předložené dokumentace se jedná o měděné příslušenství (fitinky) ke spojování nebo připojování trubek. Fitinky jsou zhotoveny do různých tvarů a rozměrů, na koncích opatřeny pájecími kroužky. Výrobek slouží ke spojení jednotlivých součástí klimatizace. Materiálové složení: - fitinky: 100% měď; - pájecí kroužky: 93 % měď, 7 % fosfor.
Rohrverbindungsstück Bei der Ware handelt es sich um ein zylindrisches Hohlerzeugnis, ähnlich einer Muffe, mit wulstförmigen Ausweitungen an beiden Seiten. Die Nennweiten variieren zwischen 12 mm bis 108 mm. Das Erzeugnis besteht gemäß den Angaben aus raffiniertem Kupfer mit der Bezeichnung Cu-DHP und wird durch Verpressen zum Verbinden von Rohren in der Trinkwasser-, Heizungs- und Druckluftinstallation verwendet. Die Ware ist aufgrund ihrer Beschaffenheit als Rohrverbindungsstück aus raffiniertem Kupfer in den TARIC-Code 7412 1000 00 einzureihen.
600 SERIES U-SLEEVE MADE OF TIN PLATED COPPER.
REFINED COPPER PIPE FITTINGS WHICH INCLUDE ELBOWS, SLEEVES AND STRAIGHT COUPLING. IT IS USED IN HOSPITALS AS A GAS/MEDICAL PIPE LINE. METAL CONTAINING AT LEAST 99.85% BY WEIGHT OF COPPER.
Accessoire de forme cylindrique pour filtre à gasoil se présentant sous la forme d'un raccord entièrement en cuivre. Il permet de raccorder le filtre à gasoil et la tête de filtre. Dimensions : 38 x 22 x 10 mm.
Rohrverbindungsstück aus Kupfer Bei der Ware handelt es sich ein um konzentrisches Hohlerzeugnis in Form eines Rohres aus raffiniertem Kupfer mit einem Durchmesser von ca. 17,70 mm und einer Länge von ca. 29 mm oder ca. 23 mm. Die Ware wird zum Verbinden von Kupferleitungen in Klimaanlagen verwendet. Die Ware ist aufgrund ihrer Abmessungen und ihrer Beschaffenheit als Rohrverbindungsstücke aus raffiniertem Kupfer in den TARIC-Code 7412 1000 00 einzureihen.
COPPER TUBE TERMINALS OR REFINED COPPER. WITH NO ELECTRICAL COMPONENTS. WITH A SOLID COPPER END WITH A FALRED ENTRY FOR THE INSERTION OF CABLES. HEIGHT 30MM, WIDTH 36M, LENGTH 85M
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Die Erläuterungen zu Pos. 7307 gelten sinngemäß für diese Position. Nicht zu dieser Position gehören: a) Bolzen und Muttern, die beim Montieren und Zusammensetzen von Rohren verwendet werden (Pos. 7415). b) Rohrform-, Rohrverschluss- und Rohrverbindungsstücke, die mit Hähnen, Ventilen usw. versehen sind (Pos. 8481).
1. Im Sinne des Kapitels 74 gelten als: a) raffiniertes Kupfer: Metall mit einem Kupfergehalt von 99,85 GHT oder mehr (RV E7401A10) oder Metall mit einem Kupfergehalt von 97,5 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV E7401A20): Andere Elemente Element Höchstgrenze in GHT Ag Silber 0,25 As Arsen 0,5 Cd Cadmium 1,3 Cr Chrom 1,4 Mg Magnesium 0,8 Pb Blei 1,5 S Schwefel 0,7 Sn Zinn 0,8 Te Tellur 0,8 Zn Zink 1 Zr Zirconium 0,3 Andere Elemente (1), je 0,3 b) Kupferlegierungen: metallische Stoffe, ausgenommen nicht raffiniertes Kupfer, in denen Kupfer gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an mindestens einem dieser anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV E7401B10) oder 2) der Gesamtgehalt an diesen an …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7412.10.00.00 cover?
Code 7412.10.00.00 covers Of refined copper. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7412.10.00.00?
The third-country duty rate for 7412.10.00.00 is 5.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7412.10.00.00?
The first six digits form the HS code: 741210. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7412.10.00.00 have?
7412.10.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7412.10.00.00 sit in the tariff?
7412.10.00.00 sits in this hierarchy: 74 COPPER AND ARTICLES THEREOF > 7412 Copper tube or pipe fittings (for example, couplings, elbows, sleeves) > 741210 Of refined copper. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7412.10.00.00?
Yes. The EBTI database holds decisions on 7412.10.00.00, for example SKBTI146826/25/183. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 7412.10.00.00 change?
7412.10.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.