Customs tariff code 8101.94.00: Unwrought tungsten, including bars and rods obtained simply by sintering
Reference data as at 1 July 2026
Customs tariff code 8101.94.00 covers Unwrought tungsten, including bars and rods obtained simply by sintering. The third-country duty rate is 5 %, plus import VAT.
8101.94.00 is CN code in the EU customs tariff, in chapter 81. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8101.94.00
- Third-country duty
- 5 %
- Declarable
- No
- Binding rulings
- 4
Where this code sits in the tariff
From HS code to customs tariff code 8101.94.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C004Uranium titanium alloys or tungsten alloys with a "matrix" based on iron, nickel or copper, having all of the following:
- 1C117Materials for the fabrication of 'missiles' components as follows:
- 1C241Rhenium, and alloys containing 90 % by weight or more rhenium; and alloys of rhenium and tungsten containing 90 % by weight or more of any combination of rhenium and tungsten, other than those specified in 1C226, having both of the following characteristics:
- 1C117Materials for the fabrication of 'missiles' components as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Stäbe aus Wolframkupfer-Legierungen Bei der Ware handelt es sich um massive, gesinterte Stäbe aus Wolfram- und Kupferpulver mit rundem, quadratischem und rechteckigem Querschnitt in verschiedenen Abmessungen. Die Dicke der Ware beträgt für rechteckige oder quadratische Stäbe mehr als 1/10 der Breite. Gemäß den Angaben liegt das Mischungsverhältnis des Wolfram- und Kupferanteils bei 70/30, 75/25 oder 80/20. Wolfram ist demzufolge gewichtsmäßig überwiegend. Die Stäbe sind nur gesintert und nicht weiter bearbeitet. Die Ware ist nach ihrer stofflichen Beschaffenheit als Wolfram und Waren daraus, einschließlich Abfälle und Schrott, andere, Wolfram in Rohform, einschließlich nur gesinterte Stangen (Stäbe), in die Unterposition 8101 9400 der Kombinierten Nomenklatur einzureihen.
Selon les déclarations de l'opérateur, barres en alliage de tungstène majoritaire, obtenues par un procédé de frittage de poudre, se présentant sous la forme de cubes métalliques de petite taille. Leur épaisseur est supérieure au dixième de leur largeur.
Stäbe aus Wolframkupfer-Legierungen Bei der Ware handelt es sich um massive, gesinterte Stäbe aus Wolfram- und Kupferpulver mit rundem, quadratischem und rechteckigem Querschnitt in verschiedenen Abmessungen. Die Dicke der Ware beträgt für rechteckige oder quadratische Stäbe mehr als 1/10 der Breite. Gemäß den Angaben liegt das Mischungsverhältnis des Wolfram- und Kupferanteils bei 70/30, 75/25 oder 80/20. Wolfram ist demzufolge gewichtsmäßig überwiegend. Die Stäbe sind nur gesintert und nicht weiter bearbeitet. Die Ware ist nach ihrer stofflichen Beschaffenheit als Wolfram und Waren daraus, einschließlich Abfälle und Schrott, andere, Wolfram in Rohform, einschließlich nur gesinterte Stangen (Stäbe), in die Unterposition 8101 9400 der Kombinierten Nomenklatur einzureihen.
Stäbe aus Wolframkupfer-Legierungen Bei der Ware handelt es sich um massive, gesinterte Stäbe aus Wolfram- und Kupferpulver mit rundem, quadratischem und rechteckigem Querschnitt in verschiedenen Abmessungen. Die Dicke der Ware beträgt für rechteckige oder quadratische Stäbe mehr als 1/10 der Breite. Gemäß den Angaben liegt das Mischungsverhältnis des Wolfram- und Kupferanteils bei 70/30, 75/25 oder 80/20. Wolfram ist demzufolge gewichtsmäßig überwiegend. Die Stäbe sind nur gesintert und nicht weiter bearbeitet. Aufgrund ihrer Beschaffenheit ist die Ware als Stäbe aus Wolfram, nur gesintert in die Unterposition 8101 9400 der Kombinierten Nomenklatur einzureihen.
Notes that govern this classification
Zu Unterposition 8101 9400: Hierher gehören: 1. Rohblöcke (Ingots) und Stäbe, im Allgemeinen von prismatischer Form; letztere werden durch Sintern von Pulver hergestellt und sind weder gehämmert, gewalzt noch stranggepresst; 2. Wolframpulver in Tabletten oder ähnlichen Formen, nur zu Dosierungs- oder Transportzwecken gepresst.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2021/600 der Kommission vom 7. April 2021 (ABl. EU Nr. L 127/26) (RV L 21/600) Stäbe aus Wolframlegierung mit einem Wolframgehalt von mehr als 94 GHT und einem Lanthangehalt von 1,5 GHT, mit einer Länge von 150 mm und einem Durchmesser von 3 mm. Die Stäbe sind nicht nur durch Sintern hergestellt, nicht mit Dekapier- oder Flussmittel umhüllt oder gefüllt. Sie haben stumpfe Enden (d. h. keine Spitzen) und sind einzeln farblich markiert. Die Farbmarkierung verweist auf das Legierungselement und den Wolframgehalt. Die Stäbe sind in Chargen abgepackt. Die Stäbe sind zum Anschleifen bestimmt und dienen als Schweißelektroden für das WIG- Schweißen (Wolfram-Inertgas-Schweißen). Bei diesem Schweißverfahren dient die Elektrode dazu, den Lichtbogen zwischen Elektrode und Werkstück zu bilden. …
Gerichtliche Entscheidungen (GE) - EuGH Urteil des EuGH vom 27. November 2008 in der Rechtssache C-403/07 Tenor Die in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif enthaltene Kombinierte Nomenklatur in ihrer im Jahr 2001 geltenden Fassung, also in der Fassung der Verordnung (EG) Nr. 2388/2000 der Kommission vom 13. Oktober 2000 zur Änderung des Anhangs I der Verordnung (EWG) Nr. 2658/87, ist dahin auszulegen, dass „nur gesinterte“ Stangen aus Wolfram oder Molybdän zu ihren Unterpositionen 8101 91 10 und 8102 91 10 (KN 2009: 8101 94 00 und 8102 94 00) gehören. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8101.94.00 cover?
Code 8101.94.00 covers Unwrought tungsten, including bars and rods obtained simply by sintering. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8101.94.00?
The third-country duty rate for 8101.94.00 is 5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8101.94.00?
The first six digits form the HS code: 810194. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8101.94.00 have?
8101.94.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8101.94.00 sit in the tariff?
8101.94.00 sits in this hierarchy: 81 OTHER BASE METALS; CERMETS; ARTICLES THEREOF > 8101 Tungsten (wolfram) and articles thereof, including waste and scrap > 810194 Unwrought tungsten, including bars and rods obtained simply by sintering. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8101.94.00?
Yes. The EBTI database holds decisions on 8101.94.00, for example DEBTI22648/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8101.94.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8101.94.00 to 1C004, 1C117, 1C241, 1C117. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8101.94.00 change?
8101.94.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.