Customs tariff code 8203.20.00.00: Pliers (including cutting pliers), pincers, tweezers and similar tools
Reference data as at 1 July 2026
Customs tariff code 8203.20.00.00 covers Pliers (including cutting pliers), pincers, tweezers and similar tools. The third-country duty rate is 1.7 %, plus import VAT.
8203.20.00.00 is TARIC code in the EU customs tariff, in chapter 82. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8203.20.00.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 82TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
- 8203Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools
- 8203.20Pliers (including cutting pliers), pincers, tweezers and similar tools
- 8203.20.00.00Pliers (including cutting pliers), pincers, tweezers and similar tools
From HS code to customs tariff code 8203.20.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| San Marino | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Coffret composé de deux articles, dont : - un miroir en verre, de forme ronde, encadré par un contour en matière plastique (ABS) et muni de deux ventouses sur l'arrière ; - une pince à épiler en acier inoxydable. Ce RTC ne reprend que la pince à épiler en acier inoxydable. Le miroir en verre fait l’objet d’un autre RTC.
Kit électricien 3 outils comprenant : - Un coupe-câble à cliquet : capacité maximale : 240 mm² diamètre de fil 32 mm - jusqu'à 240 mm² - câble de diamètre max 32mm. mécanisme à cliquet avec engrenage de propulsion traité thermiquement. lames en acier trempé, traitement multi-processus anti-rouille. poignées antidérapantes gainée ne convient pas pour la coupe de fils ou câbles en acier - Une pince coupe-câble de 215 mm : fabrication en acier trempé traitement chromé forgé double traitement anti-rouille des lames finition laquée - Une pince à dénuder automatique : plage de dénudage : 0,2 à 6,0 mm² palpeur adaptatif automatique. Pince coupe-fil intégrée pour câbles jusqu’à 2 mm de diamètre.
Pince à sertir. La pince correspond à un outil à main mécanique destiné à sertir les connecteurs F de type RZ136, RZ136HQ et RZ176. La partie travaillante est en acier, et la poignée est recouverte de PVC. La pince mesure 21cm de long.
Pince à compresser. La pince correspond à un outil à main destiné à compresser les connecteurs F de type RZ136COMP pour câbles de 6,8mm. La partie travaillante est en acier, et la poignée est recouverte de PVC. La pince mesure 20cm de long.
Pince à épiler constituée en acier inoxydable, avec une partie travaillante en acier inoxydable, destinée à permettre l’épilation. Elle est équipée d’une lumière intégrée, alimentée par une pile alcaline. Elle est conditionnée dans un emballage de type blister.
Pince à sertir pour plugs RJ12 et RJ45. La partie travaillante du produit est en métal commun (acier). L’outil à main dispose de poignées.
Dénudeur réglable pour câbles coaxiaux, dont la lame est en acier et le reste est en matières plastiques (ABS). Conditionnement sous boite individuelle en carton.
EYE LASH CURLER. THE BODY OF THE CURLER IS COMPOSED OF CARBON STEEL. THE PART THAT CONTACTS THE EYELASH TO CURL IS ALSO COMPOSED OF CARBON STEEL ON THE TOP WITH A RUBBER INSERT ON THE BOTTOM.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören folgende Handwerkzeuge: A) Feilen, Raspeln und ähnliche Werkzeuge (einschließlich kombinierte Raspelfeilen) aller Formen (flach, rund, halbrund, viereckig, dreieckig, oval usw.) und aller Größen, für Metall, Holz oder andere Stoffe. B) Kneifzangen/Beißzangen und andere Zangen (auch zum Schneiden), Pinzetten und ähnliche Werkzeuge wie: 1) Plombierzangen und Siegelzangen, Viehmarkierzangen, Gasrohrzangen, Zangen zum Setzen oder Ausziehen von Stiften und Bolzen, Ösenzangen, Sägeschränkzangen. 2) Kneifzangen (gewöhnliche Beißzangen, Hufzangen, Schmiedezangen usw.). 3) Pinzetten (z. B. für Uhrmacher, Blumenzüchter, Briefmarkensammler) sowie Enthaarungspinzetten. 4) Nagelzieher, die wie Kneifzangen arbeiten. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 197. Sitzung des Ausschusses für den Zollkodex vom 20. bis 22. Februar 2019: Warenbeschreibung: Handwerkzeug aus unedlem Metall (sog. Wimpernzange), das üblicherweise über einen scherenähnlichen Haltegriff und ein Kopfteil mit Zangenbacken verfügt, welche sich beim Schließen der Zange von beiden Seiten um die Wimpern legen. Das Werkzeug verfügt mitunter über eine zusätzliche unterstützende Druckfeder, kann aber auch mit reiner Muskelkraft betätigt werden. Einreihung: Die „Wimpernzange“ ist in Anwendung der AV 1 und 6 als „Zangen (auch zum Schneiden)“ in die Unterposition 8203 20 00 einzureihen. …
1. Außer Lötlampen, tragbaren Feldschmieden, Schleifsteine mit Gestell, Zusammenstellungen für die Hand- oder Fußpflege und Waren der Position 8209 erfasst Kapitel 82 nur Waren mit Klinge oder arbeitendem Teil: a) aus unedlem Metall (RV E8201A00); b) aus Metallcarbiden oder aus Cermets (RV E8201B00); c) aus Edelsteinen oder Schmucksteinen (natürlichen, synthetischen oder rekonstituierten), auf einem Träger aus unedlem Metall, Metallcarbid oder Cermet (RV E8201C00); d) aus Schleifstoffen auf einem Träger aus unedlem Metall, sofern es sich um Werkzeuge handelt, deren Zähne, Schneiden oder andere trennende oder schneidende Teile auch nach Aufbringen von Schleifstoffen ihre eigentliche Funktion beibehalten (RV E8201D00). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8203.20.00.00 cover?
Code 8203.20.00.00 covers Pliers (including cutting pliers), pincers, tweezers and similar tools. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8203.20.00.00?
The third-country duty rate for 8203.20.00.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8203.20.00.00?
The first six digits form the HS code: 820320. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8203.20.00.00 have?
8203.20.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8203.20.00.00 sit in the tariff?
8203.20.00.00 sits in this hierarchy: 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL > 8203 Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools > 820320 Pliers (including cutting pliers), pincers, tweezers and similar tools. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8203.20.00.00?
Yes. The EBTI database holds decisions on 8203.20.00.00, for example FRBTIFR-BTI-2025-08942-02. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8203.20.00.00 change?
8203.20.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.