Customs tariff code 8311.30.00: Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame
Reference data as at 1 July 2026
Customs tariff code 8311.30.00 covers Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame. The third-country duty rate is 2.7 %, plus import VAT.
8311.30.00 is CN code in the EU customs tariff, in chapter 83. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8311.30.00
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 83MISCELLANEOUS ARTICLES OF BASE METAL
- 8311Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying
- 8311.30Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame
- 8311.30.00Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame
From HS code to customs tariff code 8311.30.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| GSP - General arrangements | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Es handelt sich um einen silbrig glänzenden Draht mit unterschiedlichen Durchmessern aus unedlem Metall (Zinn-Silber-Legierung mit einem Gehalt an Silber von weniger als 2 GHT- Sn 99,7 / Ag 0,3). Der Draht ist innen mit Flussmittel gefüllt und wird im Bereich der Elektronik zum Löten von Elektronikbauteilen auf eine Leiterplatte verwendet. Das Erzeugnis ist auf eine Kunststoffspule gewickelt. - Antragstellerangaben - Abbildung siehe Anlage. Derartige Erzeugnisse gehören als "Drähte aus unedlen Metallen, mit Flussmittel gefüllt zum Löten von Metall" zur Unterposition 8311 3000 der Kombinierten Nomenklatur.
Dle deklarovaných údajů se jedná o drát ze slitiny olova a cínu plněný tavidlem, určený pro měkké pájení. Drát je namotaný na cívce o velikostech 1 kg, 0,5 kg, 0,1 kg atd.
Dle deklarovaných údajů se jedná o drát ze slitiny cínu a olova, cínu a mědi nebo cínu, mědi a stříbra s obsahem stříbra 0,2 – 0,4 % hmotnostních, plněný tavidlem, určený pro měkké pájení. Drát je namotaný na cívce o velikostech 1 kg, 0,5 kg, 0,1 kg atd.
Fülldrahtelektrode Bei der Ware handelt es sich um einen Schweißstab aus einer Ni-Cr-B-Si-Legierung (Nickel-Matrix) mit einem zusätzlichem Anteil an Wolframschmelzcarbid für die Autogenschweißtechnik. Das Material wird in Form von Stäben mit einer Länge von 450 mm oder als Draht geliefert. Zolltariflich handelt es sich um umhüllte Stäbe oder gefüllte Drähte aus unedlen Metallen, für das Autogenschweißen.
Dle údajů žadatele se jedná o pájecí materiál ve formě kovové trubky plněné tavidlem. Deklarovaný účel použití: ke spojení dvou kovových ploch při výrobě řídící jednotky elektronického posilovače řízení osobních automobilů. Rozměry: průměr trubky 1 mm. Balení: 10 kg materiálu namotáno na cívce, dále v papírové krabici.
Dle údajů žadatele a předloženého vzorku výrobku se jedná o pájecí drát z hliníkové slitiny pro spojování obecných kovů pájením. Hliníková trubička o průměru 1,6 mm je vyplněna tavidlem. Pájecí drát je navinut na plastové cívce v plastovém sáčku; baleno po dvou cívkách v kartonové krabici. Koncentrace složek ve slitině: - Hliník 87 - 89% - Křemík 11 - 13% Vnitřní složka (tavidlo): - Fluorid cesný (CsF) 64,5 - 74,5% - Fluorid hlinitý (FAl3) 22,5 - 35,5%
Dle údajů žadatele a předloženého vzorku výrobku se jedná o pájecí kroužky z hliníkové slitiny pro spojování obecných kovů pájením. Hliníková trubička o průměru 2 mm je vyplněna tavidlem a je svinuta do kroužku o průměru 23 mm. Koncentrace složek ve slitině: - Hliník 52 – 62% - Křemík 6 – 10 % - CsAIF-komplex 28 – 40 %
Dle údajů žadatele a předloženého vzorku výrobku se jedná o pájecí kroužky z hliníkové slitiny pro spojování obecných kovů pájením. Hliníková trubička o průměru 1 mm je vyplněna tavidlem a je svinuta do kroužku o průměru 16 mm. Koncentrace složek ve slitině: - Hliník 52 – 62% - Křemík 6 – 10 % - CsAIF-komplex 28 – 40 %
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Drähte, Stäbe, Rohre, Platten, Elektroden und andere Formen, in denen das Einsatzmaterial beim Schweißen, Löten oder Auftragen von Metall oder Metallcarbiden zugeführt wird, vorausgesetzt, dass sie umhüllt oder gefüllt sind. Bei den gefüllten Erzeugnissen besteht der Mantel im Allgemeinen aus einem Rohr oder einem spiralförmig aufgerollten Band. Drähte, Stäbe, Rohre, Platten, Elektroden usw., aus unedlen Metallen, die weder umhüllt noch gefüllt sind, gehören zu den Kapiteln 72 bis 76 und 78 bis 81. Die als Umhüllung oder als Füllung dienenden Erzeugnisse bestehen im Allgemeinen aus dem Dekapier- und dem Flussmittel (z. B. Zinkchlorid, Ammoniumchlorid, Borax, Quarz, Lanolin), die sonst beim Löten, Schweißen oder Auftragen getrennt hinzugegeben werden müssten. …
1. Teile aus unedlen Metallen von Waren des Kapitels 83 werden wie die entsprechenden Waren eingereiht. Jedoch gelten Waren aus Eisen oder Stahl der Position 7312, 7315, 7317, 7318 oder 7320 sowie die gleichen Waren aus anderen unedlen Metallen (Kapitel 74 bis 76 und 78 bis 81) nicht als Teile von Waren des Kapitels 83 (RV E8301000). 2. Als „Laufrädchen oder -rollen" im Sinne der Position 8302 gelten solche mit einem Durchmesser (auch mit aufgebrachter Lauffläche) von 75 mm oder weniger oder solche mit einem Durchmesser (auch mit aufgebrachter Lauffläche) von mehr als 75 mm und einer Radbreite oder einer Breite der aufgebrachten Lauffläche von weniger als 30 mm (RV E8302000).
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8311.30.00 cover?
Code 8311.30.00 covers Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8311.30.00?
The third-country duty rate for 8311.30.00 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8311.30.00?
The first six digits form the HS code: 831130. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8311.30.00 have?
8311.30.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8311.30.00 sit in the tariff?
8311.30.00 sits in this hierarchy: 83 MISCELLANEOUS ARTICLES OF BASE METAL > 8311 Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying > 831130 Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8311.30.00?
Yes. The EBTI database holds decisions on 8311.30.00, for example DEBTI5135/22-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8311.30.00 change?
8311.30.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.