Customs tariff code 8416.20.80.00: Other
Reference data as at 1 July 2026
Customs tariff code 8416.20.80.00 covers Other. The third-country duty rate is 1.7 %, plus import VAT.
8416.20.80.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8416.20.80.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8416Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances
- 8416.20Other furnace burners, including combination burners
- 8416.20.80Other
- 8416.20.80.00Other
From HS code to customs tariff code 8416.20.80.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Brennersystem für Thermoprozessanlage (Abbildung siehe Anlage) - spezifisch nach technischer Zeichnung gefertigtes modulares Erzeugnis, im Wesentlichen bestehend aus Brennerkopf, Gasanschluss mit Kugelhahn (ggfs. mit Anschlussschlauch), integriertem Gas-/ Luft-Mischer, Luftfilter, Gasdruckwächter, Verbrennungsluftgebläse (Radialventilator) mit Ansauggehäuse, Kompaktarmatur, Manometer sowie elektrischen Leitungen, unvollständig, - in unterschiedlichen Ausführungen (Punktbrenner oder Linienbrenner, Leistungsbereich und modulare Ausstattungskomponenten), - im maßgebenden Zeitpunkt ohne die funktionsnotwendige SPS-Brennersteuerung, - die Ware weist im maßgeblichen Zeitpunkt bereits die wesentlichen Beschaffenheitsmerk- male eines vollständigen Brennersystems auf, - zum Einbau in industrielle Thermoprozessanlagen, - dient zur hocheffizienten, schadstoffarmen und kontrollierten Erzeugung von Prozess- wärme mittels Verbrennen der zuvor hergestellten Gas-Luft-Mischung für Prozesse, bei denen kontrolliertes Erwärmen, Trocknen, Backen, Rösten oder Aushärten erforderlich ist - kennzeichnende Haupttätigkeit - sowie zum Anzeigen und Überwachen des exakten und für den Betrieb des Systems notwendigen Gas- oder Luftdrucks. "Brenner für Feuerungen, die mit Gas betrieben werden, keine Ware der TARIC-Codes 8416 1010 00 bis 8416 2020 00, unvollständig (Gasbrenner, kennzeichnende Haupttätigkeit kombiniert mit Manometer) - Brenner- system für Thermoprozessanlage"
Couronne de flambage destinée à être installée dans un four à flamber utilisé en abattoir pour le brûlage des poils de la tête des porcs. Elle est composée de tubes 40/49 en acier galvanisé. Elle est équipée de brûleurs, d'une veilleuse et d'une alimentation en gaz (le mélange air/gaz est obtenu par injection d'air comprimé).
SYSTEME DE PURGE PAR COMBUSTION DE RESERVOIRS AUTOMOBILES CONTENANT DU GAZ NATUREL LIQUIFIE CONSTITUE DES ELEMENTS SUIVANTS : - TORCHERE EN ACIER INOXYDABLE 304L. - SERPENTIN DE STABILISATION. - RACCORD D'ENTREE SPECIAL GNV. - INJECTEUR MULTIJET. - CHASSIS SUPPORT. - JUPE DE PROTECTION. - VEILLEUSE PERMANENTE HP/GN N°000 DESTINEE A ENFLAMMER LES GAZ (GNV OU GPL). - UN "CIRCUIT VEILLEUSE" COMPREND UN DETENDEUR 37MBAR, UN FLEXIBLE D'UNE LONGUEUR DE 6 METRES ET UN RACCORD AUTO-OBTURANT. - UN "CIRCUIT RESERVOIR GNV" CONSTITUE DE 2 FLEXIBLES D'UNE LONGUEUR DE 0.5 METRES ET 12 METRES ET D'UN BARREAU SUPPORT AVEC UN MANOMETRE ET UNE VANNE A INDEXATION HAUTE PRESSION. FONCTIONNEMENT DU SYSTEME : LE RESERVOIR EST VIDE DANS LA TORCHERE, LE GAZ S'ENFLAMMANT AU CONTACT DE LA VEILLEUSE. LE SERPENTIN EST DESTINE A VAPORISER LE GPL (INUTILE EN GNV). LE RESERVOIR EST REMPLI AVEC DE L'AZOTE (LA BOUTEILLE D'AZOTE N'EST PAS FOURNIE AVEC LE SYSTEME) EN MEME TEMPS QU'IL SE VIDE DANS LA TORCHERE JUSQU'A CE QUE LA FLAMME S'ETEIGNE. DIMENSIONS : 350X180X330MM. POIDS : TORCHERE SEULE : 4KG, EQUIPEMENTS SEULS : 4KG. DEBIT MOYEN GNV : 100Nm3/HEURE.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Hierher gehört eine Reihe mechanischer oder automatischer Apparate, die in Feuerungsanlagen zum Beschicken mit Brennstoff, zum wirtschaftlichen Verbrennen dieses Brennstoffes und ggf. zum Entfernen von Asche und Schlacken dienen. A) Brenner für Feuerungen Diese Apparate sind dadurch gekennzeichnet, dass sie einen langen Flammenstrahl abgeben, der an den Wandungen des Feuerraumes entlangstreicht, so dass sich in den Feuerungsanlagen die Verwendung von Rosten und Aschekästen erübrigt. Es können folgende Arten genannt werden: 1) Ölbrenner Bei ihnen wird Heizöl durch Druckluft, Dampfstrahl oder eine mechanische Vorrichtung zerstäubt und in einem Verbrennungsluftstrom in den Feuerraum eingeführt. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8416.20.80.00 cover?
Code 8416.20.80.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8416.20.80.00?
The third-country duty rate for 8416.20.80.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8416.20.80.00?
The first six digits form the HS code: 841620. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8416.20.80.00 have?
8416.20.80.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8416.20.80.00 sit in the tariff?
8416.20.80.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8416 Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances > 841620 Other furnace burners, including combination burners > 84162080 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8416.20.80.00?
Yes. The EBTI database holds decisions on 8416.20.80.00, for example DEBTI28591/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8416.20.80.00 change?
8416.20.80.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.