Customs tariff code 8454.90.00.00: Parts
Reference data as at 1 July 2026
Customs tariff code 8454.90.00.00 covers Parts. The third-country duty rate is 1.7 %, plus import VAT.
8454.90.00.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8454.90.00.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 8454.90.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B002Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
- 1B102Metal powder "production equipment", other than that specified in 1B002, and components as follows:
- 1B002Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
- 1B102Metal powder "production equipment", other than that specified in 1B002, and components as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Seitenteile (Abbildung siehe Anlage) - in Form eines maßhaltig nach Werkzeichnung gefertigten, entsprechend des vorgesehenen Verwendungszwecks geformten Einbauteils aus Baustahl, mit rechteckigem Grundriss, verschiedenen Aussparungen, Durchgangsöffnungen und Abkantungen, - zum Einbau in eine Stranggießmaschine zum Führen und Zusammenhalten eines sog. Oberteils auf dem Unterteil. "Teil, erkennbar ausschließlich für Gießmaschinen für Gießereien, Stahlwerke oder andere metallurgische Betriebe bestimmt – Seitenteile für Stranggussanlage"
Die sog. Stopfenmechanik ist eine mechanische Vorrichtung zur Regulierung des Stahlflusses einer Stranggussanlage vom Verteiler in die Kokille. Diese Vorrichtung hält den Stopfen und bewegt diesen über einen Handhebel oder mittels eines Aktuators in vertikaler Richtung; bestehend aus folgenden Hauptkomponenten: Tragarm mit Hitzeschutz, Gehäuse, Verstelleinheit, Verriegelungseinheit, Spindel, Aktuator und Handhebel mit Gegengewicht. (Angaben laut Antragsteller)
ACTUATOR ARM USED FOR ACTIVATING AN ELECTRICAL SWITCH IN A DIE CASTING MACHINE. THE PRODUCT IS MACHINE SPECIFIC.
SHAFT FOR COUPLING ELECTRIC MOTOR AND PUMP TOGETHER. SPECIFICALLY MADE FOR DIE CASTING MACHINES. MADE OF STEEL.
BUSH FOR SPACING OF A MOVING PART. MADE OF BRASS. SPECIFICALLY USED IN A DIE CASTING MACHINE.
SCREW ON TIP USED SPECIFICALLY WITHIN A DIE CASTING MACHINE. THE PRODUCT IS MADE FROM STEEL AND CONNECTS TO THE INJECTION PLUNGER WITHIN THE MACHINE.
POLISHING STONES FOR DIES. THEY HAVE A STEEL SHAFT WITH A HIGH TENSILE RUBBER HEAD. THEY ARE FITTED INTO A DIE GRINDER WHICH IS THEN USED TO POLISH ALUMINIUM DIES/CASTING
STEEL CORE PIN USED TO CREATE A CORED HOLE IN AN ALUMINIUM CASTING. PINS ARE USED IN A DIE CASTING MACHINE AS A MOULD COMPONENT WITHIN A FOUNDRY TO PRODUCE ALUMINIUM DIE CASTING PRODUCTS.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) A) Konverter Konverter sind metallurgische Apparate mit thermischer Reaktion, die jedoch nicht mit Feuerung ausgerüstet sind. Einzig mit Hilfe eines starken Sauerstoffstroms bewirken sie die Verbrennung oder Oxidation von gewissen Elementen des eingebrachten Materials, das zuvor schmelzflüssig gemacht oder auf hohe Temperatur gebracht wurde. Konverter dienen hauptsächlich zum Reinigen des Roheisens (Ausscheidung von Mangan, Silizium, Phosphor usw.) und zu dessen Umwandlung in Stahl (Verbrennung des Kohlenstoffs) bzw. auch zum Rösten von Kupfermatte, Nickelmatte oder Bleiglanz. Die am häufigsten vorkommenden Konverter sind birnenförmige oder zylindrische Behälter aus schweren Stahlplatten, die innen mit einem Futter aus feuerfestem Material ausgekleidet sind. Der Sauerstoff wird über eine sog. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8454.90.00.00 cover?
Code 8454.90.00.00 covers Parts. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8454.90.00.00?
The third-country duty rate for 8454.90.00.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8454.90.00.00?
The first six digits form the HS code: 845490. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8454.90.00.00 have?
8454.90.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8454.90.00.00 sit in the tariff?
8454.90.00.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8454 Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries > 845490 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8454.90.00.00?
Yes. The EBTI database holds decisions on 8454.90.00.00, for example DEBTI25021/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8454.90.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8454.90.00.00 to 1B002, 1B102, 1B002, 1B102. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8454.90.00.00 change?
8454.90.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.