Zolltarif-Finder
ende
Sign in
Customs tariff code

Customs tariff code 8462.69.90.00: Other

Reference data as at 1 July 2026

Customs tariff code 8462.69.90.00 covers Other. The third-country duty rate is 1.7 %, plus import VAT.

8462.69.90.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
8462.69.90.00
Third-country duty
1.7 %
Declarable
No
Binding rulings
2
On this page

Where this code sits in the tariff

  1. 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
  2. 8462Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above
  3. 8462.69Other
  4. 8462.69.90Other
  5. 8462.69.90.00Other

From HS code to customs tariff code 8462.69.90.00

HS code8462.696 digits, uniform worldwide
CN code8462.69.908 digits, EU Combined Nomenclature
TARIC code8462.69.90.0010 digits, carries the EU measures

Duty rates and preferences

OriginDuty rateBasis
Third-country duty1.7 %MFN
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
Türkiye0 %Customs Union Duty
San Marino0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference
United Kingdom0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Compliance regimes on this code

Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.

Possible dual-use control codes

Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.

  • 2B004Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:
  • 2B104"Isostatic presses", other than those specified in 2B004, having all of the following:
  • 2B204"Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:

Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.

Binding tariff information for this code

DEBTI15120/26-1Issued by DEValid until 2029-05-07

Drehdornpresse (Abbildung siehe Anlage) - im Wesentlichen bestehend aus einer Rahmenkonstruktion aus Gusseisen, mit vierfach verstellbarer Grundplatte (Durchmesser 100 mm), Handhebel mit Verstellrad, Führungsschiene und Arretiervorrichtung, - zum Stanzen, Biegen, Ein- und Auspressen von Lagern und Buchsen aus Metall. "Presse zum Kaltbearbeiten von Metallen, keine Ware der TARIC-Codes 8462 6110 00 bis 8462 6910 00 - Drehdornpresse"

DEBTI43597/23-1Issued by DEValid until 2027-01-24

2-Tonnen-Drehdornpresse (Abbildung siehe Anlage) - im Wesentlichen bestehend aus einer Rahmenkonstruktion aus Gusseisen, Handhebel mit Verstellrad für die variabel wählbaren Hebelwirkungen, Zahnstange mit Arretiervorrichtungen sowie vierfach verstellbarer Grundplatte (Durchmesser: 165 mm), - zum Kaltbearbeiten von Metall (Kaltumformung ohne vorherige Erwärmung des Materials), - für eine maximale Werkstückhöhe von 180 mm und eine Dorngröße von 30 x 30 mm, - dient zur Durchführung von Biege- und Pressarbeiten (z.B. Ein- und Auspressen von Lagern, Buchsen und Wellen). "Presse zum Bearbeiten von Metallen, vorstehend nicht genannt, keine Ware der TARIC-Codes 8462 1110 00 bis 8462 5900 00, Presse zum Kaltbearbeiten von Metall, keine hydraulische oder mechanische Presse, keine Servopresse, nicht numerisch gesteuert - 2-Tonnen-Drehdornpresse"

Notes that govern this classification

Pos. 8462

Erläuterungen zum Harmonisierten System (HS) Hierher gehören nur gewisse, im Positionstext aufgeführte Werkzeugmaschinen, deren Arbeit im Verformen von Metallen oder Metallcarbiden besteht. Die meisten dieser Maschinen sind kraftbetrieben. Aber selbst wenn sie hand- oder fußbetrieben sind, unterscheiden sie sich von den Handwerkzeugen der Pos. 8205 sowie von den von Hand zu führenden Werkzeugen der Pos. 8467 dadurch, dass sie gewöhnlich dazu eingerichtet sind, auf einem Fundament oder auf dem Boden, auf einer Werkbank, an der Wand oder an einer anderen Maschine angebracht zu werden. Sie verfügen zu diesem Zweck über eine Grundplatte, eine Aufspannplatte, einen Ständer oder eine andere entsprechende Vorrichtung. Zu dieser Position gehören: 1. Warmumformungsmaschinen (einschließlich Pressen) zum Schmieden, Gesenkschmieden und Hämmern. …

Abschnitt XVI

1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 8462.69.90.00 cover?

Code 8462.69.90.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 8462.69.90.00?

The third-country duty rate for 8462.69.90.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.

What is the HS code for 8462.69.90.00?

The first six digits form the HS code: 846269. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 8462.69.90.00 have?

8462.69.90.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.

Where does 8462.69.90.00 sit in the tariff?

8462.69.90.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8462 Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above > 846269 Other > 84626990 Other. The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 8462.69.90.00?

Yes. The EBTI database holds decisions on 8462.69.90.00, for example DEBTI15120/26-1. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Is 8462.69.90.00 a dual-use item?

The customs code alone does not decide that. An indicative correlation links 8462.69.90.00 to 2B004, 2B104, 2B204. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.

Does customs tariff code 8462.69.90.00 change?

8462.69.90.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.

Start classifyingContact us