Customs tariff code 8465.94.00.00: Bending or assembling machines
Reference data as at 1 July 2026
Customs tariff code 8465.94.00.00 covers Bending or assembling machines. The third-country duty rate is 2.7 %, plus import VAT.
8465.94.00.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8465.94.00.00
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8465Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
- 8465.94Bending or assembling machines
- 8465.94.00.00Bending or assembling machines
From HS code to customs tariff code 8465.94.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Machine à cintrer conçue pour la fabrication des produits de la tonnellerie. L'article servira à mettre en forme des tonneaux, son action consiste à courber et cintrer les douelles afin de pouvoir apposer les cercles. L'article est composé comme suit : un bâti / un support / un vérin électrique / une armoire électrique.
Poste d'assemblage avec détection des composants, utilisé dans le secteur de la transformation des matières plastiques (injection thermoplastique) pour l'automobile. Il se compose des éléments suivants : ventouses, support, connectique pneumatique/électrique, cellule photoélectrique, vérin et boitier de commande. Il a pour une fonction de support de pièce plastique pour permettre un assemblage de composants (agrafes métalloplastiques, mousses d'insonorisation...) sur celle-ci en manuel ou en automatique : Au niveau opérateur (manuel) : 1/ dépose pièce principale/mise en place de composants (agrafes/feutres/pièce secondaire/joints...). 2/manipulation manuelle du cadre par rotation implantée sur le poste pour brider la pièce. Au niveau posage (automatique) : 1/ détection par cellules photo électriques de la présence des composants. 2/ opération de découpe des carottes grâce à un système de lame et de vérin. 3/ opération par vérin pour confirmation de l'assemblage entre les pièces/ insertion des agrafes/ pressage de feutres et de pièces. 4/ aspiration par ventouse de la pièce. Il est piloté par une armoire de contrôle (non comprise). Environnement industriel : il est posé sur une table à hauteur d'homme en sortie d'outillage d'injection plastique. Il est alimenté en 24V continu.
SHUTTER ASSEMBLY MACHINE. SPECIAL PURPOSE FLOOR MOUNTED ASSEMBLY MACHINE. THIS MACHINE IS SPECIFICALLY DESIGNED TO ASSEMBLE SHUTTERS FROM PLASTIC AND RUBBER PARTS. THE SHUTTERS ARE USED IN THE MANUFACTURE OF TONER CARTRIDGES. ASSEMBLY PROCESS OVERVIEW: HOLDER SHUTTER LOADED TO ROTARY TABLE - O-RING FITTED TO HOLDER SHUTTER - TONER SEALS FITTED TO HOLDER SHUTTER - STOPPER FITTED TO HOLDER SHUTTER - SHUTTER FITTED TO HOLDER SHUTTER - FINISHED ASSEMBLY PRESSURE TESTED - FINISHED ASSEMBLY REMOVED FROM ROTARY TABLE.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Werkzeugmaschinen zum Formen oder zum Oberflächenbearbeiten (einschließlich Schneiden, Formen und Zusammenfügen) von Holz (und aus Holz hergestellten Stoffen), Kork, Bein, Hartkautschuk, harten Kunststoffen und ähnlichen harten Stoffen (Horn, Steinnuss, Perlmutter, Elfenbein usw.). Nicht zu dieser Position gehören Maschinen zum Bearbeiten von Stoffen, die zwar in dieser Position aufgeführt sind, jedoch bei Bearbeitungsbeginn nicht die wesentlichen Merkmale von harten Stoffen aufweisen. Aus diesem Grunde sind Maschinen zum Schneiden oder Abstechen von weichen Kunststoffen oder Weichkautschuk ausgenommen (Pos. 8477). Ebenfalls ausgenommen sind Maschinen zum Herstellen von Waren aus körnigem oder pulverförmigem Material, z. B. Maschinen zum Formen von Kunststoffen (Pos. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8465.94.00.00 cover?
Code 8465.94.00.00 covers Bending or assembling machines. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8465.94.00.00?
The third-country duty rate for 8465.94.00.00 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8465.94.00.00?
The first six digits form the HS code: 846594. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8465.94.00.00 have?
8465.94.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8465.94.00.00 sit in the tariff?
8465.94.00.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8465 Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials > 846594 Bending or assembling machines. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8465.94.00.00?
Yes. The EBTI database holds decisions on 8465.94.00.00, for example FRBTIFR-BTI-2021-05638. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8465.94.00.00 change?
8465.94.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.