Customs tariff code 8466.20.98.00: Other
Reference data as at 1 July 2026
Customs tariff code 8466.20.98.00 covers Other. The third-country duty rate is 1.2 %, plus import VAT.
8466.20.98.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8466.20.98.00
- Third-country duty
- 1.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8466Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
- 8466.20Work holders
- 8466.20.98Other
- 8466.20.98.00Other
From HS code to customs tariff code 8466.20.98.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B003Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
- 2B003"Numerically controlled" machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc=40 or more) spur, helical and double-helical gears having all of the following:
- 9B115Specially designed "production equipment" for the systems, sub-systems and components specified in 9A005 to 9A009, 9A011, 9A101, 9A102, 9A105 to 9A109, 9A111, 9A116 to 9A120.
- 1B003Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
- 2B003"Numerically controlled" machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc=40 or more) spur, helical and double-helical gears having all of the following:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Porta piezas de metal diseñados para servir de guía o plantilla en la soldadura de tubos (JIG de soldadura). Son de uso repetitivo, aunque necesitan de un mantenimiento periódico (para asegurar que el calibrado y los ángulos son correctos) y disponen de mordazas, topes y accesorios para asegurar el tubo al porta piezas. No disponen de ningún componente eléctrico o motor. Se presentan con diferentes dimensiones y diseños en función del tubo final que vaya a ser fabricado. Según declaración del solicitante se utilizan para realizar la soldadura de las diferentes partes de los tubos en los ángulos correctos.
Sog. Vorrichtungsplatten, - aus einem maßhaltig nach Zeichnung gefertigten rechteckigen Werkstück (Abmessungen: 170 x 170 x 1300 mm) aus unedlem Metall (Werkstoff: 1.1730), an allen Seiten mit diversen, spezifisch platzierten Bohrungen und Aus- sparungen (Abbildung siehe Anlage), - zur Verwendung als Funktionskomponente eines für Werkzeugmaschinen zur spanabhebenden Metallbearbeitung (Drehen, Fräsen und Bohren) bestimmten Werkstückhalters zum kraftschlüssigen Fixieren eines Werkstückes. "Teil, erkennbar ausschließlich für Maschinen der Position 8456 bis 8465 bestimmt, Werkstückhalter, nicht von den TARIC-Codes 8466 2020 00 bis 8466 2091 00 erfasst, sog. Vorrichtungsplatten"
Sog. Gripper, Artikelgruppe EH 22620, - aus einem runden bzw. quadratischen Grundkörper aus brüniertem Werkzeugstahl, mit Innen- gewinde und geriffeltem Hartmetalleinsatz, mit einem maximalen äußeren Durchmesser von 25 mm bzw. einer maximalen Seitenlänge von 12 mm (Abbildung siehe Anlage) - zur Übertragung von hohen Drehmomenten und Haltekräften auf zu bearbeitenden Werk- stücke, zur Verwendung als Funktionskomponente eines für Werkzeugmaschinen bestimmten Werkstückhalters (z.B. für Spannbacken, Spannarme, Greifersysteme usw.). "Teil, erkennbar ausschließlich für Werkstückhalter bestimmt - sog. Gripper"
Polierteller - aus rostfreiem Stahl, kreisrund, mittig durchbohrt mit angesetzter Arretiermöglichkeit an der Aufnahmevorrichtung der Poliermaschine und vierundzwanzig Einsteckplätzen für LWL-Stecker (Abbildung siehe Anlage), - als Werkstückhalter zur Aufnahme von LWL-Steckern mit keramischer Ferrule für Lichtwellenleiter-Poliermaschinen. "Teil, erkennbar ausschließlich für Poliermaschinen bestimmt, Werkstückhalter, keine Ware des TARIC-Codes 8466 2020 00, nicht für Drehmaschinen - sog. Polierteller"
Ersatzteilesatz - aus 24 sog. Einsteckvorrichtungen für LWL-Stecker aus Kunststoff, - gemeinsam verpackt in einer Verkaufsverpackung mit 24 Schrauben aus unedlem Metall und einem Inbusschlüssel, - als typisierter Ersatzteilesatz für einen Polierteller (Werkstückhalter) für LWL-Stecker in einer Poliermaschine. Die Einsteckvorrichtungen für Lichtwellen-Stecker bestimmen den Charakter der Warenzusammenstellung. "Teil, erkennbar ausschließlich für Werkstückhalter für Lichtwellenleiter-Poliermaschine bestimmt - Warenzusammenstellung aus charakterbestimmenden Werkzeughalterteilen, Schrauben und Inbusschlüsssel (sog. Ersatzteileset für Polierteller)"
Fixierungsteller, - kreisrund, mittig durchbohrt mit angesetzter Arretiermöglichkeit an der Aufnahme- vorrichtung der Poliermaschine und zwölf Einsteckplätzen für LWL Stecker, - als Werkstückhalter zur Aufnahme von LWL-Steckern mit keramischer Ferrule für Lichtwellenleiter Poliermaschinen. "Werkstückhalter für Lichtwellenleiter-Poliermaschinen"
Polierteller - aus rostfreiem Stahl, kreisrund, mittig durchbohrt mit angesetzter Arretiermöglichkeit an der Aufnahmevorrichtung der Poliermaschine und zwölf Einsteckplätzen für LWL Stecker, - als Werkstückhalter zur Aufnahme von LWL-Steckern mit keramischer Ferrule für Lichtwellenleiter Poliermaschinen. "Werkstückhalter für Lichtwellenleiter-Poliermaschinen - sog. Polierteller"
Polierteller - aus rostfreiem Stahl, kreisrund, mittig durchbohrt mit angesetzter Arretiermöglichkeit an der Aufnahmevorrichtung der Poliermaschine und vierundzwanzig Einsteckplätzen für LWL-Stecker (Abbildung siehe Anlage), - als Werkstückhalter zur Aufnahme von LWL-Steckern mit keramischer Ferrule für Lichtwellenleiter-Poliermaschinen. "Werkstückhalter für Poliermaschinen - Polierteller"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören vorbehaltlich der allgemeinen Bestimmungen über die Einreihung von Teilen (siehe Erläuterungen zu Abschnitt XVI, Allgemeines) und mit Ausnahme der Werkzeuge des Kapitels 82: A) Teile der Maschinen der Positionen 8456 bis 8465. B) Zubehör für diese Maschinen, d. h. auswechselbare Ausrüstungsgegenstände, welche die genannten Maschinen der auszuführenden Arbeit anpassen, Vorrichtungen, die den Maschinen zusätzlich Bearbeitungsmöglichkeiten oder eine höhere Präzision geben und Vorrichtungen, die es ermöglichen, eine im Zusammenhang mit der Hauptfunktion der Maschinen stehende Sonderarbeit auszuführen. C) Werkzeughalter für von Hand zu führende Werkzeuge oder Werkzeugmaschinen, aller Art. Zu den hier erfassten Teilen und Zubehör gehören u. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8466.20.98.00 cover?
Code 8466.20.98.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8466.20.98.00?
The third-country duty rate for 8466.20.98.00 is 1.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8466.20.98.00?
The first six digits form the HS code: 846620. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8466.20.98.00 have?
8466.20.98.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8466.20.98.00 sit in the tariff?
8466.20.98.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8466 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand > 846620 Work holders > 84662098 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8466.20.98.00?
Yes. The EBTI database holds decisions on 8466.20.98.00, for example ESBTIESBTI2024SOL714. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8466.20.98.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8466.20.98.00 to 1B003, 2B003, 9B115, 1B003, 2B003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8466.20.98.00 change?
8466.20.98.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.