Customs tariff code 8466.30.00: Dividing heads and other special attachments for machines
Reference data as at 1 July 2026
Customs tariff code 8466.30.00 covers Dividing heads and other special attachments for machines. The third-country duty rate is 1.2 %, plus import VAT.
8466.30.00 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8466.30.00
- Third-country duty
- 1.2 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8466Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
- 8466.30Dividing heads and other special attachments for machines
- 8466.30.00Dividing heads and other special attachments for machines
From HS code to customs tariff code 8466.30.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 7B103"Production facilities" and "production equipment" as follows:
- 9B115Specially designed "production equipment" for the systems, sub-systems and components specified in 9A005 to 9A009, 9A011, 9A101, 9A102, 9A105 to 9A109, 9A111, 9A116 to 9A120.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Klemmhülse mit Flanschring - in Form eines zylindrischen Metall-Kunststoff-Verbundelements mit Hülsenmantel aus Kunststoff, darin eingesetzten Grundkörper aus unedlem Metall (Bronzelegierung, Stahl), Dichtringen und angesetztem Flanschring (Abbildung siehe Anlage), - zum Einbau in Werkzeugmaschinen als hydraulisch betätigte Spezialvorrichtung zum Klemmen und Fixieren von runden Maschinenelementen bei Druckbeaufschlagung des Außenmantels, - lieferbar in verschieden Größen mit unterschiedlichen Durchmessern und Bauteillängen. "Spezialvorrichtung für Werkzeugmaschinen - sog. Klemmhülse mit Flanschring"
Sog. Hydrounterstützer (Abstützelement), Baureihe 5316 - aus einer reaktionsfreien Klemmhülse mit Kunststoff-Mantel und Dichtringen, gefedertem Stützbolzen mit Einschraubgewinde, in einem patronenförmigen Einbaugehäuse mit Ölzulauf- und Entlüftungsbohrungen sowie Montageflansch (Abbildung siehe Anlage), - zum Einbau in Werkzeugmaschinen als hydraulisch betätigte Spezialvorrichtung zur Stabilisierung von labilen Werkstücken und zur Gegenlagerung an überbestimmten Spannstellen durch Klemmen des Stützbolzens, - lieferbar mit verschiedenen Stützbolzengrößen und Flanschformen. "Spezialvorrichtung für Werkzeugmaschinen - sog. Hydrounterstützer (Abstützelement)"
Motorspindelschutzsystem MS3 (Kollisionsschutzsystem) - aus einem Doppelflanschsystem mit Spindel- und Montageflansch, Haftmagnetsystem, Feder- und Stoßdämpferelementen, Dichtung, Zentrierpins und Schutzabdeckung (Abbildung siehe Anlage), - zur Verwendung als Kollisions- und Überlastungsschutz in einer spanenden Werkzeug- maschine durch Unterbrechung des Kraftflusses bei Trennung der beiden Flansche. "Spezialvorrichtung für Werkzeugmaschinen - sog. Motorspindelschutzsystem für Werkzeugmaschine"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören vorbehaltlich der allgemeinen Bestimmungen über die Einreihung von Teilen (siehe Erläuterungen zu Abschnitt XVI, Allgemeines) und mit Ausnahme der Werkzeuge des Kapitels 82: A) Teile der Maschinen der Positionen 8456 bis 8465. B) Zubehör für diese Maschinen, d. h. auswechselbare Ausrüstungsgegenstände, welche die genannten Maschinen der auszuführenden Arbeit anpassen, Vorrichtungen, die den Maschinen zusätzlich Bearbeitungsmöglichkeiten oder eine höhere Präzision geben und Vorrichtungen, die es ermöglichen, eine im Zusammenhang mit der Hauptfunktion der Maschinen stehende Sonderarbeit auszuführen. C) Werkzeughalter für von Hand zu führende Werkzeuge oder Werkzeugmaschinen, aller Art. Zu den hier erfassten Teilen und Zubehör gehören u. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8466.30.00 cover?
Code 8466.30.00 covers Dividing heads and other special attachments for machines. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8466.30.00?
The third-country duty rate for 8466.30.00 is 1.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8466.30.00?
The first six digits form the HS code: 846630. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8466.30.00 have?
8466.30.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8466.30.00 sit in the tariff?
8466.30.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8466 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand > 846630 Dividing heads and other special attachments for machines. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8466.30.00?
Yes. The EBTI database holds decisions on 8466.30.00, for example DE2975/14-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8466.30.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8466.30.00 to 7B103, 9B115. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8466.30.00 change?
8466.30.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.