Customs tariff code 8466.93.00.00: For machines of headings 8456 to 8461, andere, für Maschinen der Positionen 8456 bis…
Reference data as at 1 July 2026
Customs tariff code 8466.93.00.00 covers For machines of headings 8456 to 8461, andere, für Maschinen der Positionen 8456 bis 8461. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8466.93.00.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8466.93.00.00
- Third-country duty
- See subdivision
- Declarable
- Yes
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8466Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
- 8466.93For machines of headings 8456 to 8461
- 8466.93.00.00For machines of headings 8456 to 8461, andere, für Maschinen der Positionen 8456 bis 8461
From HS code to customs tariff code 8466.93.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Schnellfrequenz-Spindel - aus Spindelgehäuse (Gehäusedurchmesser 80 mm ) mit Montageflansch, Präzisions- Spindellagerung, Welle mit pneumatischem Spannsystem für Werkzeugaufnahme, elektrischem Motorantrieb (Stator und Rotor), elektronischer Messsensorik für Steuerung/Regelung von Drehzahlen, Flüssigkeitskühlung sowie Funktions- und Versorgungsanschlüssen (Abbildung siehe Anlage), - zur Verwendung als Spezial-Ausrüstung für den Einsatz in Fräs-, Bohr-, Schleif- und Graviermaschinen, vorzugsweise zur Metallbearbeitung, durch Hochgeschwindigkeits- Zerspanen. "Zubehör, erkennbar hauptsächlich für Werkzeugmaschinen der Positionen 8456 bis 8461 bestimmt - sog. Schnellfrequenz-Spindel für Werkzeugmaschinen der Position 8459 und 8460"
Schnellfrequenz-Spindel - aus Spindelgehäuse (Gehäusedurchmesser 61,9 mm ) mit Montageflansch, Präzisions- Spindellagerung, Welle mit pneumatischem Spannsystem für Werkzeugaufnahme, elektrischem Motorantrieb (Stator und Rotor), elektronischer Messsensorik für Steuerung/ Regelung von Drehzahlen, Flüssigkeitskühlung sowie Funktions- und Versorgungs- anschlüssen (Abbildung siehe Anlage), - zur Verwendung als Spezial-Ausrüstung für den Einsatz in Fräs-, Bohr-, Schleif- und Graviermaschinen, vorzugsweise zur Metallbearbeitung, durch Hochgeschwindigkeits- Zerspanen. "Zubehör, erkennbar hauptsächlich für Werkzeugmaschinen der Positionen 8456 bis 8461 bestimmt - sog. Schnellfrequenz-Spindel für Werkzeugmaschinen der Position 8459 und 8460"
Maschinenständer - aus Stahl, geschweißt, spezifisch geformte, funktionsnotwendige Vorrichtung, nach technischer Zeichnung gefertigt, - zur Montage mit einem horizontalen Bearbeitungszentrum zum Bearbeiten von Metallen. "Teil, erkennbar ausschließlich oder hauptsächlich für Maschinen der Position 8456 bis 8461 bestimmt - Maschinenständer"
SOUS-ENSEMBLE MECANIQUE FAISANT PARTIE D'UNE MACHINE A GRAVER LASER. IL EST CONSTITUE DU SQUELETTE DE LA MACHINE (BOITIER), DU CHARIOT AXES ET DE LA TABLE DE GRAVURE. POUR CONSTITUER LA MACHINE A GRAVER, SERONT AJOUTES A CES ELEMENTS UNE SOURCE LASER CONSTITUANT LE COEUR DE LA MACHINE AINSI QUE LES CARTES ELECTRONIQUES ASSURANT LE FONCTIONNEMENT DE L'APPAREIL (ELEMENTS NON FOURNIS).
BORING BAR. SINGLE POINT PRECISION FINISHING TOOL. USED IN PRISMATIC MACHINING APPLICATIONS ON ALL TYPES OF VERTICAL, HORIZONTAL AND 5 AXIS MACHING CENTRES AND MILLING MACHINES. USED TO INCREASE BORES IN WORKPIECES AS A SINGLE POINT PRECISION FINISHING TOOL TO ACHIEVE VERY ACCURATE BORES. MADE FROM STEEL, HARDENED, TEMPERED AND PRECISION GROUND.
Schnellfrequenz-Spindel - aus Spindelgehäuse (Gehäusedurchmesser 42 mm) mit Montageflansch, Präzisions- Spindellagerung, Welle mit pneumatischem Spannsystem für Werkzeugaufnahme, elektrischem Motorantrieb (Stator und Rotor), elektronischer Messsensorik für Steuerung/ Regelung von Drehzahlen sowie Funktions- und Versorgungsanschlüssen (Abbildung siehe Anlage), - zur Verwendung als Spezial-Ausrüstung für den Einsatz in Fräs-, Bohr-, Schleif- und Graviermaschinen, vorzugsweise zur Metallbearbeitung, durch Hochgeschwindigkeits- Zerspanen. "Zubehör, erkennbar hauptsächlich für Werkzeugmaschinen der Positionen 8456 bis 8461 bestimmt - sog. Schnellfrequenz-Spindel für Werkzeugmaschinen der Position 8459 und 8460"
Schnellfrequenz-Spindel - aus Spindelgehäuse (Gehäusedurchmesser 80 mm ) mit Montageflansch, Präzisions- Spindellagerung, Welle mit manuellem Spannsystem für Werkzeugaufnahme, elektrischem Motorantrieb (Stator und Rotor), elektronischer Messsensorik für Steuerung/Regelung von Drehzahlen, Flüssigkeitskühlung sowie Funktions- und Verorgungsanschlüssen (Abbildung siehe Anlage), - zur Verwendung als Spezial-Ausrüstung für den Einsatz in Fräs-, Bohr-, Schleif- und Graviermaschinen, vorzugsweise zur Metallbearbeitung, durch Hochgeschwindigkeits- Zerspanen. "Zubehör, erkennbar hauptsächlich für Werkzeugmaschinen der Positionen 8456 bis 8461 bestimmt - sog. Schnellfrequenz-Spindel für Werkzeugmaschinen der Position 8459 und 8460"
Rundtischständer - aus Stahl, geschweißt, spezifisch geformte, funktionsnotwendige Vorrichtung, nach technischer Zeichnung gefertigt, - zur Montage mit einem horizontalen Bearbeitungszentrum zum Bearbeiten von Metallen. "Teil, erkennbar ausschließlich oder hauptsächlich für Maschinen der Position 8456 bis 8461 bestimmt - Rundtischständer"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören vorbehaltlich der allgemeinen Bestimmungen über die Einreihung von Teilen (siehe Erläuterungen zu Abschnitt XVI, Allgemeines) und mit Ausnahme der Werkzeuge des Kapitels 82: A) Teile der Maschinen der Positionen 8456 bis 8465. B) Zubehör für diese Maschinen, d. h. auswechselbare Ausrüstungsgegenstände, welche die genannten Maschinen der auszuführenden Arbeit anpassen, Vorrichtungen, die den Maschinen zusätzlich Bearbeitungsmöglichkeiten oder eine höhere Präzision geben und Vorrichtungen, die es ermöglichen, eine im Zusammenhang mit der Hauptfunktion der Maschinen stehende Sonderarbeit auszuführen. C) Werkzeughalter für von Hand zu führende Werkzeuge oder Werkzeugmaschinen, aller Art. Zu den hier erfassten Teilen und Zubehör gehören u. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Frequently asked questions
What does customs tariff code 8466.93.00.00 cover?
Code 8466.93.00.00 covers For machines of headings 8456 to 8461, andere, für Maschinen der Positionen 8456 bis 8461. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8466.93.00.00?
TARIC holds no third-country rate of its own for 8466.93.00.00. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8466.93.00.00?
The first six digits form the HS code: 846693. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8466.93.00.00 have?
8466.93.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8466.93.00.00 sit in the tariff?
8466.93.00.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8466 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand > 846693 For machines of headings 8456 to 8461. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8466.93.00.00?
Yes. The EBTI database holds decisions on 8466.93.00.00, for example DE7808/11-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8466.93.00.00 change?
8466.93.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.