Customs tariff code 8477.20.00.00: Extruders
Reference data as at 1 July 2026
Customs tariff code 8477.20.00.00 covers Extruders. The third-country duty rate is 1.7 %, plus import VAT.
8477.20.00.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8477.20.00.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 7
Where this code sits in the tariff
From HS code to customs tariff code 8477.20.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B118Continuous mixers having all of the following, and specially designed components therefor:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Sog. Mikrocompounder für die Heißschmelzextrusion, - aus einem Tischgehäuse (Abmessungen: 580 x 370 x 340 mm) mit einem Verfahrensteil mit zwei sich gleichläufig drehenden Mischschnecken, einer Schnittplatte, einer elektrischen Temperiereinheit, Was- serkühlung und einem Einfülltrichter sowie einer Antriebseinheit mit Getriebe, Motor, Bedienelementen sowie diversen Anschlüssen, über Kabel mit einer Steuereinheit mit Touchscreen verbunden (Abbildung siehe Anlage), - zum Heißschmelz-Extrudieren von festen und pastösen thermoplastischen Kunststoffen (Polyvinyl Pyrrolidone (PVP) oder Etylenvinylacetat (EVA)) - Hauptverwendungszweck - , zum Beimischen von Zusatzstoffen (Compounden) sowie zum Extrudieren von anderen Polymeren, polymerbasierten Materi- alien, Lebensmitteln und lebensmittelähnlichen Stoffen, - zusammen mit Verbindungskabeln und Bedienungsanleitung (Beipack) in einer gemeinsamen Verkaufs- umschließung. Der sog. Microcompounder bestimmt den Charakter des Ganzen. "Maschine zum Verarbeiten von Kunststoffen, in Kapitel 84 anderweit genannt noch inbegriffen, keine Spritzgießmaschine (Maschine mit vielseitiger Verwendungsmöglichkeit zum Extrudieren von Kunststof- fen - kennzeichnende Haupttätigkeit - zum Compounden und zum Extrudieren anderer Stoffe) - sog. Mikrocompounder für die Heißschmelzextrusion"
Kompletna linia produkcyjna w stanie niezmontowanym do produkcji płyt dyfuzyjnych, wykonanych z tworzywa sztucznego, używanych do produkcji ekranów LCD. Linia składa się z następujących elementów: instalacji dozującej surowiec (tworzywo sztuczne w postaci granulatu), wytłaczarki głównej i pomocniczej, głowicy, kalandrów, samotoku, instalacji kontroli automatycznej, instalacji nakładania cieczy antystatycznej, rolek zaciągających, skrawarek boków, piły poprzecznej, układarki, frezarki, stanowisk kontroli wizualnej. Surowiec - granulat tworzywa sztucznego (4 rodzaje) jest dozowany przez instalację dozującą do wytłaczarki głównej i pomocniczej. W wytłaczarkach następuje roztopienie granulatu i homogenizacja powstałej żywicy. Płynna żywica zostaje wytłoczona przez głowicę w postaci warstwowej wstęgi, która jest formowana na kalandrach. Następnie wstęga przechodzi przez samotok i instalację automatycznej kontroli grubości, jasności i zawartości ciał obcych. Wstęga przechodząc przez instalację nakładania cieczy antystatycznej zaciągana jest przez rolki samozaciągające. Skrawarki boków obcinają brzegi wstęgi, a piła poprzeczna ucina z wstęgi płytę dyfuzyjną o zadanych wymiarach. Po przycinaniu płyty są szlifowane na frezarce do ostatecznego kształtu i wymiarów, a następnie po kontroli wizualnej następuje pakowanie płyt.
EXTRUDEUSE UTILISEE POUR HOMOGENEISER UNE MATIERE PLASTIQUE LIQUIDE ET LA STABILISER EN TEMPERATURE. ELLE EST EN ACIER ET EST DE FORME TUBULAIRE. ELLE COMPORTE DES RESISTANCES ELECTRIQUES QUI MAINTIENNENT LA TEMPERATURE DE LA MATIERE PLASTIQUE LIQUIDE, ET UNE VIS SANS FIN POUR LA FAIRE AVANCER. UN SYSTEME INTEGRE A L'EXTRUDEUSE PERMET LE CONTROLE DU DEBIT DE PLASTIQUE, PAR ACTION SUR LA VITESSE DE ROTATION DE LA VIS SANS FIN. DIAMETRE: 220 MM
EXTRUDEUSE UTILISEE POUR FAIRE FONDRE DES MELANGES DE MATIERES PLASTIQUES DE MANIERE A LES TRANSFORMER EN UN LIQUIDE VISQUEUX. ELLE EST EN ACIER ET EST DE FORME TUBULAIRE. ELLE COMPORTE DES RESISTANCES ELECTRIQUES QUI ASSURENT LE CHAUFFAGE DE LA MATIERE PLASTIQUE POUR LA FONDRE, ET UNE VIS SANS FIN POUR FAIRE AVANCER LE PRODUIT PLASTIQUE. DIAMETRE: 175 MM
EXTRUDEUSE, SERVANT A FONDRE UN MELANGE DE MATIERES PLASTIQUES, DE MANIERE A LE TRANSFORMER EN UN LIQUIDE VISQUEUX. ELLE EST EN ACIER ET DE FORME TUBULAIRE. ELLE COMPORTE DES RESISTANCES ELECTRIQUES QUI ASSURENT LE CHAUFFAGE DE LA MATIERE PLASTIQUE POUR LA FONDRE, ET UNE VIS SANS FIN POUR FAIRE AVANCER LE PRODUIT PLASTIQUE. LE LIQUIDE PLASTIQUE EST UTILISE POUR FABRIQUER DES FILMS DE POLYPROPYLENE.
EXTRUDEUSE, SERVANT A FONDRE UN MELANGE DE MATIERES PLASTIQUES, DE MANIERE A LE TRANSFORMER EN UN LIQUIDE VISQUEUX. ELLE EST EN ACIER ET EST DE FORME TUBULAIRE. ELLE COMPORTE DES RESISTANCES ELECTRIQUES QUI ASSURENT LE CHAUFFAGE DE LA MATIERE PLASTIQUE POUR LA FONDRE, ET UNE VIS SANS FIN POUR FAIRE AVANCER LE PRODUIT PLASTIQUE; L'EXTRUDEUSE EST UTILISEE POUR LA FABRICATION DE FILM EN POLYPROPYLENE.
THIS IS A BLOWN FILM MACHINERY LINE USED FOR THE EXTRUSION OF PLASTIC FILMS FOR APPLICATIONS SUCH AS FOR MAKING SHOPPING BAG FILM, PACKINGING FILM FOR LAMINATION PURPOSE, HEAT SHRINKABLE FILM AND HEAVY DUTY FILM. IT IS A MONO LINE WITH A DOUBLE STATION WINDER. THE LINE COMPRISES OF AN EXTRUDER, SCREWS, DIE HEAD, BUBBLE CAGE, HAUL OFF UNIT, WINDERS, FILM TREATER AND ELECTRICS.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Hierher gehören neben den in den Erläuterungen zu Pos. 8477 des HS aufgeführten Maschinen und Apparaten: 1. Maschinen zum Abgraten von Gummisohlen und Gummiabsätzen, die, obwohl sie in der Schuhindustrie verwendet werden, nicht zum Bearbeiten von Leder, Häuten oder Fellen bestimmt sind; 2. Maschinen zum Schneiden von Blöcken aus Moltopren, Schaumgummi, Latex-Schaum und ähnlichen Werkstoffen mit Hilfe eines umlaufenden Bandmessers oder eines Sägeblatts.
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Maschinen und Apparate zum Be- oder Verarbeiten von Kautschuk und Kunststoffen oder zum Herstellen von Waren aus diesen Stoffen, in Kapitel 84 anderweit weder genannt noch inbegriffen. Zu dieser Position gehören: 1) Maschinen zum Formen von Reifen oder anderen Waren aus Kautschuk oder Kunststoffen, mit Ausnahme der Formen selbst (sie gehören insbesondere zu den Pos. 6815, 6903 und 8480). 2) Maschinen zum Durchstoßen der Ventillöcher bei Luftschläuchen. 3) Spezialmaschinen und -apparate zum Schneiden von Kautschukfäden. 4) Formpressen für Kautschuk und Kunststoffe. 5) Spezialpressen zum Formen von thermoplastischen Pulvern. 6) Pressen zum Herstellen von Schallplatten. 7) Maschinen zum Herstellen von Vulkanfiber. 8) Extruder. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8477.20.00.00 cover?
Code 8477.20.00.00 covers Extruders. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8477.20.00.00?
The third-country duty rate for 8477.20.00.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8477.20.00.00?
The first six digits form the HS code: 847720. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8477.20.00.00 have?
8477.20.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8477.20.00.00 sit in the tariff?
8477.20.00.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8477 Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter > 847720 Extruders. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8477.20.00.00?
Yes. The EBTI database holds decisions on 8477.20.00.00, for example DEBTI49775/20-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8477.20.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8477.20.00.00 to 1B118. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8477.20.00.00 change?
8477.20.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.