Customs tariff code 8480.71.00: Injection or compression types
Reference data as at 1 July 2026
Customs tariff code 8480.71.00 covers Injection or compression types. The third-country duty rate is 1.7 %, plus import VAT.
8480.71.00 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8480.71.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8480Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics
- 8480.71Injection or compression types
- 8480.71.00Injection or compression types
From HS code to customs tariff code 8480.71.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Parties de moules pour le moulage par injection des matières plastiques, se présentant sous la forme de plaques en acier qui, une fois assemblées, constitueront le corps du moule. Ces plaques sont parfois livrées déjà montées, avec des éléments standard. Des empreintes (non présentées) doivent être positionnées dans le corps en acier pour constituer le moule complet. Les plaques sont forées, fraisées et rectifiées.
Stampi per iniezione plastica (acciaio/alluminio). L'articolo è costituito da stampi per stampaggio a iniezione, realizzati in acciaio o alluminio, utilizzati per produrre parti in plastica mediante iniezione di materiale fuso (polietilene, polipropilene, poliammide, policarbonato o altri polimeri). Gli stampi sono composti da due piastre: una fissa con la matrice che definisce la forma del prodotto finale, e una mobile, dotata di punzone, che si adatta alla matrice. Il numero di cavità può variare, permettendo la produzione di uno o più pezzi per ciclo.
Schrägschiebereinheit ohne Schieber (Abbildung siehe Anlage), - spezifisch im Hinblick auf die Einbausitutation gefertigtes zylinderförmiges, gebogenes Bauteil bestehend aus verschiedenen Gliedern, einem Seil und einem Gewindestift, jeweils aus Stahl, - zum Lösen von mechanischen Hinterschneidungen von Spritzgussteilen nach Einbau in ein Spritzgießwerkzeug (Form). "Teil, erkennbar ausschließlich bestimmt für Formen für Kunststoffe zum Spritzgießen"
Sog. Klinkenzug und Zweistufenauswerfer Platten zusammen (Double Ejection Plates Together) -Abbildung siehe Anlage-, - in Form einer nach technischer Zeichnung gefertigten Maschinenbaugruppe aus Stahl,bestehend aus Führungsstangen, einem Deckel, einem Klemmring, drei Führungsbuchsen, einer Feder, vier Halterungen, Innensechskantschrauben und einem Gewindestift, - zum Anbau innen oder außen an einem Spritzgießwerkzeug, - zur Steuerung der Plattenbewegung eines Spritzwerkzeuges bei mehreren Auswerferplatten. "Teil, erkennbar ausschließlich bestimmt für Formen für Kautschuk oder Kunststoffe, zum Spritzgießen"
Synchrone Auswerferplattenbewegung für Spritzgussform - aus mehreren Führungsstangen, Deckel, Klemmring, Führungsbuchsen, Rundge- häusen, Halter für Führungsstangen und Positionshülsen, jeweils aus Stahl, - erkennbar zum Einbau in eine Spritzgussform (Spritzgusswerkzeug) zur Fertigung Kunststoffwaren bestimmt, - erhältlich in mehreren Versionen mit unterschiedlicher Ausstattung und verschie- denen Abmessungen sowie zum Anbau am Werkzeug oder im Werkzeuginneren. „Teil, erkennbar ausschließlich bestimmt für Formen für Kunststoffe – synchrone Auswerferplattenbewegung für Spritzgussform“
Stempel für Spritzgussform (Abbildung siehe Anlage) - in Form eines maßhaltig nach Werkzeichnung gefertigten, verwndungsspezifisch geformten, stift- artigen Einbauelements aus Stahl (Abmessungen: L x B x H: 35,99 x 4,41 x 1,95 mm) mit ein- seitiger, planer Prägefläche, - zum Einbau in die Formplatte einer Spritzgussform, - dient zum maßgenauen Ausspritzen von mittleren bis kleinsten Kunststoffkörpern beim Spritz- gießen. "Teil, erkennbar ausschließlich bestimmt für Formen für Kunststoffe, zum Spritzgießen - Stempel für Spritzgussform"
Taotleja kirjelduse ja lisatud fotode kohaselt kujutab toode terasest või alumiiniumist valmistatud erineva konfiguratsiooniga valuvorme, mida kasutatakse survevalu teel plastdetailide tootmiseks. Valuvormid koosnevad kahest osast/plaadist. Ühel plaadil on fikseeritud maatriks, millel on tulevase toote kuju, teisel on liikuv stants (puanson), mis langeb kokku maatriksi profiiliga. Valuvormi õõnsusse juhitakse surve all spetsiaalsete voolikute kaudu sulamaterjal (polüetüleen, polüpropüleen, polüamiid, polükarbonaat või muud polümeerid) saades nii soovitud kujuga toote. Õõnsuste arv valuvormis võib olla erinev. Näiteks ühe õõnsusega, kui toodetakse üks detail tsükli kohta või mitme õõnsusega valuvormid, mida kasutatakse mitme detaili/osa tootmiseks. Valuvormid plastdetailide survevaluks. Teras ja alumiinium
Parties de moules pour le moulage par injection des matières plastiques, se présentant sous la forme de plaques en acier qui, une fois assemblées, constitueront le corps du moule. Ces plaques sont parfois livrées déjà montées, avec des éléments standard. Des empreintes (non présentées) doivent être positionnées dans le corps en acier pour constituer le moule complet. Les plaques sont forées, fraisées et rectifiées.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Gießerei-Formkästen, Grundplatten für Formen, Gießereimodelle und – außer nachstehend aufgeführten Ausnahmen – sämtliche Formen zerlegbare oder unzerlegbare), die von Hand oder mit Hilfe von Pressen oder anderen Maschinen zum Formen oder Gießen von Rohlingen oder Fertigwaren aus folgenden Stoffen dienen: I) Metalle und Metallcarbide. II) Glas (einschließlich geschmolzenem Quarz oder anderem geschmolzenem Siliciumdioxid) oder mineralischen Stoffen, z. B. keramischen Massen, Beton oder Gips. III) Kautschuk oder Kunststoffen In der Regel haben die Formen hauptsächlich die Aufgabe, das Material solange in einer bestimmten Form zu halten, bis es erstarrt ist oder abgebunden hat. Die aktiven Formen üben außerdem noch einen Druck auf das Material aus. Nicht zu dieser Position gehören dagegen Stanzmatrizen der Pos. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8480.71.00 cover?
Code 8480.71.00 covers Injection or compression types. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8480.71.00?
The third-country duty rate for 8480.71.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8480.71.00?
The first six digits form the HS code: 848071. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8480.71.00 have?
8480.71.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8480.71.00 sit in the tariff?
8480.71.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8480 Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics > 848071 Injection or compression types. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8480.71.00?
Yes. The EBTI database holds decisions on 8480.71.00, for example FRBTIFR-BTI-2026-04104. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8480.71.00 change?
8480.71.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.