Customs tariff code 8514.90.70.00: Other
Reference data as at 1 July 2026
Customs tariff code 8514.90.70.00 covers Other. The third-country duty rate is 2.2 %, plus import VAT.
8514.90.70.00 is TARIC code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8514.90.70.00
- Third-country duty
- 2.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
- 8514Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss
- 8514.90Parts
- 8514.90.70Other
- 8514.90.70.00Other
From HS code to customs tariff code 8514.90.70.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.2 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B226aControlled atmosphere (vacuum or inert gas) induction furnaces, other than those specified in 9B001 and 3B001, and power supplies therefor, as follows:
- 2B226bControlled atmosphere (vacuum or inert gas) induction furnaces, other than those specified in 9B001 and 3B001, and power supplies therefor, as follows:
- 2B227aVacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
- 2B227bVacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
- 2B227cVacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
- 2B227dVacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
- 2B227eVacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
- 2B226Controlled atmosphere (vacuum or inert gas) induction furnaces, other than those specified in 9B001 and 3B001, and power supplies therefor, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
PARTI DI FORNO ELETTRICO AD USO PROFESSIONALE. LA MERCE E' PROGETTATA PER ESSERE INSTALLATA IN FORNI ELETTRICI SPECIFICI (NON SONO PARTI GENERICHE). LA MERCE SI PRESENTA COME LASTRE IN ACCIAIO AISI 430 E ACCIAIO ZINCATO, SENZA CONGIUNZIONI ELETTRICHE, GIÀ LAVORATE CHE, PER EFFETTO DEI TAGLI A MISURA, DEI FORI (DI DIAMETRI DIVERSI) E DELLE BUGNATURE PRESENTI SULLE SUPERFICI, PERDONO LA CARATTERISTICA DI LASTRE O PRODOTTI PIATTI, PER ASSUMERE QUELLE DI PARTI AVENTI CARATTERISTICHE ESSENZIALI PER LA PRODUZIONE ESCLUSIVA DI FORNI ELETTRICI SPECIFICI.
Sog. Bodenbelag (Abbildung siehe Anlage), - in Form eines maßhaltig nach Werkzeichnung gefertigten, gitterartigen Einbauele- ments (Abmessungen: Durchmesser: 1200 mm, Dicke: 60 mm) aus hitzebeständigem, nichtrostendem Stahlguss, mit mittiger konischer Vorrichtung für die Arretierung in einem Ofen durch einen Befestigungsstab, - erkennbar als Brenngut-Auflage (Bodenbelag für Vergütungsgestell) in einem Ofen (sog. Tiefofen) mit elektrischer Beheizung bestimmt. "Teil, erkennbar ausschließlich oder hauptsächlich für elektrische Industrieöfen bestimmt, keine Ware des TARIC-Codes 8514 9030 00 - sog. Bodenbelag für elektrischen Tiefofen"
Parties d’appareil de fours à trempe électriques, sous la forme de rouleaux en silice fondue avec aux extrémités des cylindres usinés en acier C45. Les rouleaux sont conçus pour être installés au sein de fours à trempe électriques spécifiques (ce ne sont pas des parties génériques). Ils sont destinés à être mis en rotation pour le convoyage du verre au sein du four. Les rouleaux sont composés de silice fondue les rendant résistant à de très hautes températures.
Einsatz (Abbildung siehe Anlage) - aus einem spezifisch gefertigten Formteil (HBT: 33 x 19 x 26 cm bzw. 34 x 19 x 26,5) mit mehreren Aussparungen, - zur schnelleren Veraschung von organischen und anorganischen Proben, - zum Einbau in einem Mikrowellenverascher. "Teil, erkennbar ausschließlich für andere als von der Unterposition 8514 30 20 erfasste elektrische Industrie- oder Laboratoriumsapparate bestimmt"
En värmelementhållare (elektrodhållare) till industriella elektriska ugnar. Varan utgör en nödvändig del till en elektrisk ugn för att fixera elektroden. Hållaren är tillverkad av sintrat aluminiumsilikat och försedd med hål och urtag. Mått: L 280 mm, B 94 mm, H 55 mm
Molybdän - Glasschmelzelektroden (Abbildung siehe Anlage) - in Form von zylindrischen Stangen aus Molybdän (Molybdän-Gehalt 99,95%) mit Innengewinde an einem Ende, - mit einer Standardlänge bis zu 900 mm und Sonderlängen bis zu 1300 mm und mit einem Durchmesser von 30 bis 90 mm, - erkennbar ausschließlich zum Einbau in einen Glasschmelzofen. "Teil, erkennbar ausschließlich für einen Glasschmelzofen bestimmt, nicht vom TARIC-Code 8514 90 30 00 erfasst; Glasschmelzelektroden"
Induktionsgenerator (Abbildung siehe Anlage) - aus einer mit aktiven und passiven Bauelementen (u.a. Mikrocontroller, Transistoren, Spannungsregler, Spulen, Kondensatoren, Drosseln, Varistoren) bestückten gedruckten Schaltung, in einem rechteckigen Metallgehäuse mit spezifischen Aussparungen und Montagebohrungen sowie drei in Reihe eingebauten Axialventilatoren, mit Anschlussvorrichtungen für eine Induktionsspule, einen externen Ventilator, Lampen, einen Temperaturfühler und für den Netzanschluss, Maße: 28,5 x 28,5 x 7 cm, - zur Stromversorgung und elektronischen Steuerung der Temperatur und Topferkennung einer Induktionskochplatte, - gemeinsam verpackt mit Bedienungsanleitung, Kunststoffhalterungen und einem bedruckten Typenschild (Beipack) in einem Karton, - zum Einbau in einen gewerblich genutzten Induktionsherd. Der Induktionsgenerator bestimmt den Charakter des Ganzen. "Teil, erkennbar ausschließlich für einen elektrischen, gewerblich genutzten Induktionsofen bestimmt, keine Ware des TARIC-Codes 8514 9030 00, (in Warenzusammenstellung mit nicht charakterbestimmendem Beipack), -Induktionsgenerator"
Sog. Bubbler Rohr - in Form eines maßhaltig nach Werkzeichnung gefertigten, hohlzylindrischen Einbau- elements (Bauteillänge 680 mm, Außendurchmesser 16 mm) aus einer Platinlegierung, an einem Rohrende mit umlaufender Kragung, - erkennbar zum Einbau in die Schmelzwanne eines Glasschmelzofens bestimmt, - zum Einblasen von Luft in das flüssige Glas zum Entfernen von Lufteinschlüssen. "Teil, erkennbar ausschließlich für einen elektrischen Industrieofen bestimmt, keine Ware des TARIC-Codes 8514 9030 00 - sog. Bubbler Rohr für Glasschmelzofen"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Induktionsöfen, Öfen mit dielektrischer Erwärmung und andere Industrie- und Laboratoriumsapparate zum Warmbehandeln von Stoffen mittels Induktion oder dielektrischer Erwärmung (z. B. Industriemikrowellenöfen und -apparate). Zu dieser Position gehören in der Industrie oder in Laboratorien verwendete elektrothermische Maschinen, Apparate und Geräte, in denen Wärme mit Hilfe elektrischer Energie erzeugt wird, z. B. beim Durchgang des Stroms durch geeignete Widerstände oder durch den elektrischen Lichtbogen. Nicht zu dieser Position gehören elektrothermische Maschinen und Apparate von der im Haushalt verwendeten Art. (Pos. 8516). …
1. Zu Kapitel 85 gehören nicht: a) Bettdecken, Heizkissen, Fußwärmer und ähnliche Gegenstände, mit elektrischer Heizvorrichtung; Kleidung, Schuhe, Ohrenschützer und andere am Körper zu tragende Gegenstände, mit elektrischer Heizvorrichtung (RV E8501A00); b) Glaswaren der Position 7011 (RV E8501B00); c) Maschinen, Apparate und Geräte der Position 8486 (RV E8501C00); d) Staubsauger von der für medizinische, chirurgische, zahnärztliche oder tierärztliche Zwecke verwendeten Art (Position 9018) (RV E8501D00); oder e) elektrisch beheizte Möbel des Kapitels 94 (RV E8501E00). 2. Waren, die sowohl den Positionen 8501 bis 8504 als auch der Position 8511, 8512, 8540, 8541 oder 8542 zugewiesen werden können, sind in eine der fünf zuletzt genannten Positionen einzureihen (RV E8502100). Quecksilberdampfgleichrichter mit Metallgefäß gehören jedoch zu Position 8504 (RV E8502200). 3. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8514.90.70.00 cover?
Code 8514.90.70.00 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8514.90.70.00?
The third-country duty rate for 8514.90.70.00 is 2.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8514.90.70.00?
The first six digits form the HS code: 851490. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8514.90.70.00 have?
8514.90.70.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8514.90.70.00 sit in the tariff?
8514.90.70.00 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8514 Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss > 851490 Parts > 85149070 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8514.90.70.00?
Yes. The EBTI database holds decisions on 8514.90.70.00, for example ITBTIIT922104-2021-BTI0723. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8514.90.70.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8514.90.70.00 to 2B226a, 2B226b, 2B227a, 2B227b, 2B227c, 2B227d, 2B227e, 2B226. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8514.90.70.00 change?
8514.90.70.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.