Customs tariff code 8541.90.00: Parts
Reference data as at 1 July 2026
Customs tariff code 8541.90.00 covers Parts. The third-country duty rate is 0 %, plus import VAT.
8541.90.00 is CN code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8541.90.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
- 8541Semiconductor devices (for example, diodes, transistors, semiconductor-based transducers); photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED), whether or not assembled with other light-emitting diodes (LED); mounted piezo-electric crystals
- 8541.90Parts
- 8541.90.00Parts
From HS code to customs tariff code 8541.90.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 3A001hElectronic items as follows:
- 3A501Electronic items as follows:
- 3C005High resistivity materials as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Kühler für Hochleistungslaserdioden (Abbildung siehe Anlage) - aus einem spezifisch gefertigten ca. 2,7 x 1,0 x 0,1 cm großen Körper aus mehreren Schichten Kupfer, mit dreidimensionalen Mikro- bzw. Makrokanalstrukturen, mit Löchern und Aussparungen versehen, - zur Verwendung als Träger, zur Wärmeableitung und elektrischen Kontaktierung von Laserdioden (in Form von einzelnen Laserdioden oder Laserdiodenbarren aus GaAs-Laserdioden ohne weitere Elemente). "Teil, erkennbar ausschließlich oder hauptsächlich für Leuchtdioden (Laserdioden) bestimmt - Kühler für Hochleistungslaserdioden"
Kühler für Hochleistungslaserdioden (Abbildung siehe Anlage), - aus einem spezifisch gefertigten ca. 4,2 x 2,1 x 0,3 cm großen Körper aus mehreren Schichten Kupfer, zwei Isolationsschichten aus Keramik und dreidimensionalen Mikro- bzw. Makrokanalstrukturen, mit Löchern und Aussparungen versehen, - zur Verwendung als Träger, zur Wärmeableitung und elektrischen Kontaktierung von Laserdioden (in Form von einzelnen Laserdioden oder Laserdiodenbarren aus GaAs-Laserdioden ohne weitere Elemente). "Teil, erkennbar ausschließlich oder hauptsächlich für Leuchtdioden (Laserdioden) bestimmt - Kühler für Hochleistungslaserdioden"
Kühlkörper für Hochleistungslaserdioden (Abbildung siehe Anlage) - aus einem spezifisch gefertigten ca. 2,5 x 2,5 x 0,8 cm großen Körper aus Kupfer, mit Löchern und Aussparungen versehen, - zur Verwendung als Träger, zur Wärmeableitung und elektrischen Kontaktierung von Laserdioden (in Form von einzelnen Laserdioden oder Laserdiodenbarren aus GaAs-Laserdioden ohne weitere Elemente). "Teil, erkennbar ausschließlich oder hauptsächlich für Leuchtdioden (Laserdioden) bestimmt - Kühler für Hochleistungslaserdioden"
Conform descrierii solicitantului și a fotografiilor publicate în baza de date, produsul reprezintă o ramă (panou) din aluminiu pentru panouri fotovoltaice. În vamă este prezentată în stare dezansamblată. Pe linia de ansamblare a panourilor fotovoltaice ansamblarea se face printr-o simplă îmbinare, fără înșurubare sau lipire a profilelor . Reprezintă o parte a unui panou fotovoltaic. Este alcătuită din patru părți laterale și patru părți de îmbinare în formă de L, din care două părți laterale mai lungi (lungime între 1650 mm și 2450 mm) și două părți laterale mai scurte (lungime între 990 mm și 1350 mm). Ramele sunt fabricate conform planurilor cotate cu găuri de fixare destinate exclusiv fixării panoului fotovoltaic. Acestea sunt din aluminiu și sunt anodizate pentru a asigura protecția împotriva coroziunii. Culoarea ramelor poate fi neagră sau argintie.
Dle deklarovaných údajů se jedná o dilatační vložky, které se používají při výrobě polovodičových diod, zhotovené z tenkého molybdenového plechu. Výrobek je kruhového tvaru, po celém obvodu s hranou. Zboží zvyšuje životnost polovodičových diod a kompenzuje rozdíly v tepelné roztažnosti křemíkového čipu diody, který má malou tepelnou roztažnost a vrchního měděného víka, který má velkou tepelnou roztažnost, čímž zabraňuje vzájemnému odírání křemíkového čipu a měděného víka diody. Diody (nejsou součástí této ZISZ) se používají při usměrnění střídavého proudu na stejnosměrný, nejčastěji jsou určeny pro svářecí roboty.
Hliníkové profily určené pre montáž na solárne panely ako ich časti. Budú dodávané ako profily vyrobené extrudovaním, eloxovaním a rezaním. Ide o profily dodávané v presných narezaných dĺžkach, ktoré sa budú v rámci výroby solárnych panelov spájať spolu panelom, s cieľom vyrobiť rám. Vyrobené z hliníkovej zliatiny (označenie 6005 T6).
Del solarnega modula – okvir v razstavljenem stanju, sestavljen iz dveh daljših in dveh krajših profilov ter štirih kotnikov. S pomočjo kotnikov, ki se vstavijo v oba kraka krajših profilov in v oba kraka daljših profilov, se brez vijačenja ali lepljenja sestavi okvir, ki predstavlja ogrodje solarnega modula. Daljša profila sta narezana na dolžino 2.110 ali 1.770 mm, krajša profila pa na dolžino 1050 mm. Profili so na obeh koncih odrezani pod kotom 45 stopinj. Profili in kotniki iz aluminijeve zlitine (Al-Mg-Si), so izdelani skladno s standardom EN AW-6060 T6. Zaradi zagotavljanja zaščite pred korozijo so anodizirani.
Submount für Laserdiodenbarren, - aus einem spezifisch gefertigten, rechteckigen Plättchen (Abmessungen: 10,6 x 4,5 x 0,3 mm) mit einem Kern aus einer Wolfram/Kupfer-Legierung, mit einer Korrosionsschutzbeschichtung aus Nickel und Gold, oberseitig mit einem Gold-Zinn-Lot bedampft, - erkennbar ausschließlich für Laserdiodenbarren zum Schutz vor wärmeinduzierten Verspannungen und zur Ableitung der Betriebswärme. "Teil, erkennbar ausschließlich oder hauptsächlich für Laserdioden bestimmt; Submount für Laserdiodenbarren"
Notes that govern this classification
Zu Unterposition 8541 90 00: Neben den in den Erläuterungen zu Pos. 8541 des HS aufgeführten Teilen gehören z. B. hierher: 1. Halterungen und Gehäuse für piezoelektrische Kristalle; 2. Gehäuse aus Metall, Steatit usw., für montierte Halbleiter. Nicht hierher gehören z. B.: a) Stromzuführungen, die den Strom von den Kontaktstiften zu den Elektroden führen (Pos. 8536); b) Teile aus Grafit (Unterposition 8545 90 90). (1) Anmerkung: ab 1.1.2022 zutreffender KN-Code: 8541 43 00
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 1037/2014 der Kommission vom 25. September 2014 (ABl. EU Nr. L 287/9) (RV L 1037/14): 1. Eine Halbleiterkomponente (so genanntes „LED- Modul“), bestehend aus einem LED-Chip und einer parallel geschalteten Zener-Schutzdiode in einem Kunststoffgehäuse mit kuppelförmiger, transparenter Kunststoffabdeckung, mit Abmessungen von etwa 7 × 7 × 5 mm, ohne Anschlusspads. Die Komponente ist insofern untrennbar, als einige Bestandteile zwar theoretisch entfernt und ersetzt werden können, dies aber zeitaufwendig und schwierig ist und daher unter normalen Herstellungsbedingungen unwirtschaftlich wäre. Das LED-Modul ist so konzipiert, dass es auf Leiterplatten montiert werden kann, etwa durch Löttechniken zur Oberflächenmontage (SMD). …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des EuGH vom 2. Oktober 2008 in der Rechtssache C-411/07: Einreihung von lichtempfindlichen Halbleiterbauelementen (Optokopplern) in die Kombinierte Nomenklatur Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der durch die Verordnung (EG) Nr. 1832/2002 der Kommission vom 1. August 2002 geänderten Fassung ist dahin auszulegen, dass ein Optokoppler unabhängig davon, ob er eine Verstärkerschaltung enthält oder nicht, Position 8541 zuzuweisen ist. Gerichtliche Entscheidungen (GE)
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg vom 18.07.2014 - Az.: 4 K 3/13, Leitsatz Zu den Merkmalen eines Lasers der Warennummer 9013 (Rn.45) (Rn.47) (Rn.49). Orientierungssatz 1. Zum LS: Laserdioden im Sinne der Kombinierten Nomenklatur sind nur die diskreten Bauelemente selbst, so dass es einer Einreihung der Apparate als Laser der Pos. 9013 KN nicht entgegensteht, dass in ihnen Laserdioden verbaut sind (Rn.48). 2. Nichtzulassungsbeschwerde eingelegt (Az. des BFH: VII B 145/14). 3. Die Nichtzulassungsbeschwerde wurde als unbegründet zurückgewiesen (BFH-Beschluss vom 21.10.2015 VII B 145/14). Auszug aus dem Urteil des Bundesfinanzhofs vom 15. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8541.90.00 cover?
Code 8541.90.00 covers Parts. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8541.90.00?
The third-country duty rate for 8541.90.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8541.90.00?
The first six digits form the HS code: 854190. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8541.90.00 have?
8541.90.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8541.90.00 sit in the tariff?
8541.90.00 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8541 Semiconductor devices (for example, diodes, transistors, semiconductor-based transducers); photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED), whether or not assembled with other light-emitting diodes (LED); mounted piezo-electric crystals > 854190 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8541.90.00?
Yes. The EBTI database holds decisions on 8541.90.00, for example DEBTI43759/23-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8541.90.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8541.90.00 to 3A001h, 3A501, 3C005. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8541.90.00 change?
8541.90.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.