Customs tariff code 8542.90.00.00: Parts
Reference data as at 1 July 2026
Customs tariff code 8542.90.00.00 covers Parts. The third-country duty rate is 0 %, plus import VAT.
8542.90.00.00 is TARIC code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8542.90.00.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 8542.90.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 3A501Electronic items as follows:
- 3A502General purpose "electronic assemblies", modules and equipment, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Teil einer elektronisch integrierten Schaltung, in Form eines ca. 25 x 11 x 1,6 mm großen, silberfarbenen „Schälchens“, mit mehreren verschiedenen Öffnungen auf der Flachseite und Einkerbungen an den Rändern; das Erzeugnis dient als Abdeckung für eine elektronische integrierte Schaltung. (siehe Abbildungen)
Connecteur USB 3.1 de type C pour montage sur circuit imprimé. Le montage se fait par soudure du connecteur directement sur le circuit imprimé.
Composant destiné à être fixé sur des circuits imprimé. Il est prévu pour laisser passer le signal GNSS. Il est composé d’une couche conductrice (en polyimide avec placage cuivre et placage étain) mise en contact directement sur le circuit imprimé, d’une partie adhésive et d’un noyau élastomère en caoutchouc silicone.
Partie de circuit intégré électronique, se présentant sous la forme d’une protection destinée à préserver les différents composants d’un circuit intégré. La protection est composée des éléments suivants : - un cadre métallique fixé sur le circuit, qui délimite la zone à protéger, et qui permet de recevoir un capot de protection ; - un capot de protection métallique, fixé sur le cadre, qui couvre la zone à protéger. Les éléments sont composés en feuille de fer blanc (STPE). Les dimensions du capot sont les suivantes : 36,2 x 20,2 mm. Les dimensions du cadre sont les suivantes : 36,2 x 20,2 mm.
Capot vitre pour capteurs d'images CCD/CMOS (pour les marchés du téléphone cellulaire, de l’imagerie satellite et médicale...), destiné à être monté sur un circuit intégré en céramique (scellement étanche par résine Epoxy), juste au-dessus de la puce CCD/CMOS qui est elle-même collée et câblée dans ce circuit intégré céramique, servant de filtres pour la transmission de certaines fréquences (longueurs d’ondes de 400-900 nm < 97%), fabriqué en verre borosilicate (D263Teco de chez Schott) transparent avec traitement anti-reflet ou anti-infra rouge et haute résistance chimique sur lequel est déposée une préforme de colle Epoxy pour montage sur circuit intégré céramique.
Boitiers céramiques destinés à recevoir un circuit intégré électronique (non compris) pour détecteur infrarouge. Ils sont composés de 2 parties, l'une en céramique et l'autre comportant des broches en alliage de fer, de nickel et de cobalt métallisées nickel/or.
PARTIE DE CIRCUIT INTEGRE ELECTRONIQUE COMPOSE D'UN EMPILAGE DE 2 SUBSTRATS CUIVRE/CERAMIQUE/CUIVRE BRASES L'UN SUR L'AUTRE. LA PARTIE SUPERIEURE EST UNE PLAQUE DE CUIVRE GRAVEE AVEC UN CADRE METAL BRASE, A L'INTERIEUR DUQUEL SERONT DISPOSES DES PUCES/CIRCUITS INTEGRES/COMPOSANTS (NON PRESENTS). LE CADRE SERA PAR LA SUITE FERME HERMETIQUEMENT PAR UNE PLAQUE (NON PRESENTE). L'ARTICLE SERA UTILISE POUR DES APPLICATIONS EN ENVIRONNEMENT SEVERE AVEC DE FORTES PUISSANCES ET/OU HAUTES TEMPERATURES (AERONAUTIQUE, FORAGE PETROLIER ETC...). IL EST DE FORME RECTANGULAIRE AVEC 1 PERCAGE A CHAQUE COIN.
A PART OF AN ELECTRONIC INTEGRATED CIRCUIT. THE PRODUCT IS A METAL LAMINATED ASSEMBLY WITH OFFSET PINS WHICH ARE FIXED TO A PRINTED CIRCUIT BOARD AS PART OF AN ELECTRONIC INTEGRATED CIRCUIT. THE ASSEMBLY IS DESIGNED TO INCORPORATE A HALL EFFECT ELEMENT WHICH IS A SEMICONDUCTOR DEVICE. THE PRODUCTS INCORPORATE A WIRE COIL. THE WIRE COIL WILL BE USED TO SURROUND THE CABLE TO BE TESTED. THE CURRENT IS THEN PASSED THROUGH THE CABLE THAT RUNS THROUGH THE SENSOR WHICH CREATES A CHANGE IN MAGNETIC FLUX WITHIN THE AIR GAP WHERE THE HALL ELEMENT IS LOCATED. FEATURES LAMINATIONS STACKED ALTERNATELY WITH AN EQUAL QUANTITY EACH END OF COIL ASSEMBLY. THIRD ANGLE PROJECTION , LAMINATIONS TO BE SECURED WITH ADHESIVE TAPE.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Die Waren dieser Position sind in Anmerkung 12 b) zu diesem Kapitel definiert. Elektronische integrierte Schaltungen sind elektronische Schaltungen mit in großer Dichte angeordneten und als eine Einheit anzusehenden passiven und aktiven Bauelementen. (Hinsichtlich der Frage, welche Bauelemente als „passiv“ oder „aktiv“ anzusehen sind, siehe die Erläuterungen zu Pos. 8534, erster Absatz). Elektronische Schaltungen, die nur passive Bauelemente enthalten, gehören jedoch nicht zu dieser Position. Im Gegensatz zu elektronischen integrierten Schaltungen haben diskrete Bauelemente eine einzige aktive elektrische Funktion (Halbleiterbauelemente wie in der Anmerkung 12 a) zu Kapitel 85 definiert), oder eine einzige passive elektrische Funktion (Widerstände, Kondensatoren, Induktivitäten, usw.). …
1. Zu Kapitel 85 gehören nicht: a) Bettdecken, Heizkissen, Fußwärmer und ähnliche Gegenstände, mit elektrischer Heizvorrichtung; Kleidung, Schuhe, Ohrenschützer und andere am Körper zu tragende Gegenstände, mit elektrischer Heizvorrichtung (RV E8501A00); b) Glaswaren der Position 7011 (RV E8501B00); c) Maschinen, Apparate und Geräte der Position 8486 (RV E8501C00); d) Staubsauger von der für medizinische, chirurgische, zahnärztliche oder tierärztliche Zwecke verwendeten Art (Position 9018) (RV E8501D00); oder e) elektrisch beheizte Möbel des Kapitels 94 (RV E8501E00). 2. Waren, die sowohl den Positionen 8501 bis 8504 als auch der Position 8511, 8512, 8540, 8541 oder 8542 zugewiesen werden können, sind in eine der fünf zuletzt genannten Positionen einzureihen (RV E8502100). Quecksilberdampfgleichrichter mit Metallgefäß gehören jedoch zu Position 8504 (RV E8502200). 3. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8542.90.00.00 cover?
Code 8542.90.00.00 covers Parts. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8542.90.00.00?
The third-country duty rate for 8542.90.00.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8542.90.00.00?
The first six digits form the HS code: 854290. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8542.90.00.00 have?
8542.90.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8542.90.00.00 sit in the tariff?
8542.90.00.00 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8542 Electronic integrated circuits > 854290 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8542.90.00.00?
Yes. The EBTI database holds decisions on 8542.90.00.00, for example ATBTI2025000759-DEC. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8542.90.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8542.90.00.00 to 3A501, 3A502. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8542.90.00.00 change?
8542.90.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.