Customs tariff code 9031.20.00.00: Test benches
Reference data as at 1 July 2026
Customs tariff code 9031.20.00.00 covers Test benches. The third-country duty rate is 2.8 %, plus import VAT.
9031.20.00.00 is TARIC code in the EU customs tariff, in chapter 90. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 9031.20.00.00
- Third-country duty
- 2.8 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 90OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF
- 9031Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors
- 9031.20Test benches
- 9031.20.00.00Test benches
From HS code to customs tariff code 9031.20.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B116Vibration test systems, equipment and components therefor, as follows:
- 2B232High-velocity gun systems (propellant, gas, coil, electromagnetic, and electrothermal types, and other advanced systems) capable of accelerating projectiles to 1,5 km/s or greater.
- 7B003Equipment specially designed for the "production" of equipment specified in 7A.
- 7B103"Production facilities" and "production equipment" as follows:
- 9B107Aerothermodynamic test facilities, usable for 'missiles', 'missile' rocket propulsion systems, and reentry vehicles and equipment specified in 9A116, having any of the following characteristics:
- 9B117Test benches or test stands for solid or liquid propellant rockets or rocket motors, having either of the following characteristics:
- 2B116Vibration test systems, equipment and components therefor, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Sog. EOL-Prüfvorrichtung, im Wesentlichen bestehend aus einem ummantelten und auf Rollen oder auf Stellfüßen gelagertem Gestell aus Aluminiumprofilen (245 / 246 x 178 x 99 cm), das mit einem Prüfraum mit einem prüflingsspezifischen Licht- und einem Kameramodul, mit einer mit einer Bildschirmanzeige, zwei Status-LEDs und vier Drucktastern bestückten Basisstation, einem Etikettendrucker, einer Strom- und einer pneumatischen Versorgungseinheit, mit einer Datenverarbeitungseinheit, mit Kommunikationsanschlüssen sowie mit weiteren elektrischen und elektronischen Bauelementen ausgestattet ist (zur äußeren Form: siehe Abbildung in der Anlage. In den Prüfraum werden Fasermatten (textile Lichtsysteme), die zur Verkleidung von Fahrzeugtüren bestimmt sin, eingelegt und mittels spezieller Adapter an eine Lichtquelle angeschlossen, so dass diese Matten leuchten. Nach dem Verschließen des Prüfraums nimmt eine sog. Leuchtdichtekamera ein Foto zur lichttechnischen Bewertung des Prüflings auf, welches zur Auswertung und Speicherung an eine übergeordnete Einheit (nicht Gegenstand dieser vZTA-Entscheidung) weitergeleitet wird. Die Ware ist dazu bestimmt, die Leuchtdichte von illuminierten, polymeren, optischen Fasern mit Hilfe einer Spezialkamera nach einem vorgegebenen Plan zu prüfen und somit die Qualitätskontrolle durchzuführen. Die Ware wird als "Gerät zum Messen oder Prüfen, in Kapitel 90 anderweit weder genannt noch inbegriffen, als Prüfstand" eingereiht.
Sog. Leiterplattentestgerät, im Wesentlichen bestehend aus einem Gestell, welches mit einen PC mit Bildschirm und Tastatur, einem Timer, einer Prüfvorrichtung in einem separaten Gehäuse sowie mit einer Stromversorgungseinheit ausgestattet ist. Die Prüfvorrichtung verfügt über fünf Steckplätze für NI-Messkarten, einem Digitalmultimeter (PXI-4065) und über eine spezielle Halterung (Nadelbettadapter), in welche die zu prüfenden Baugruppen eingelegt werden (zur äußeren Form: siehe Abbildung in der Anlage). Die bestückten Leiterplatten werden zum Prüfen im Nadelbettadapter an definierten Messpunkten mit Kontaktnadeln verbunden. Im Anschluss daran werden einem vorgegebenen Prüfplan folgend, u. a. Frequenzmessungen vorgenommen und die Messdaten werden protokolliert. Die Einzelkomponenten sind über Kabel miteinander verbunden und bilden eine funktionelle Einheit. Die kennzeichnende Funktion ist die Ermittlung der Funktionsfähigkeit der bestückten Leiterplatten. Die Ware wird als "Gerät zum Messen oder Prüfen, in Kapitel 90 weder genannt noch inbegriffen, keine Auswuchtmaschine, als Prüfstand" eingereiht.
Banc hors production permettant de faire des tests de performance et des analyses qualité des transmissions assemblées, suivant le besoin. L'ensemble est composé de : - 1 châssis ; - Éléments usinés assemblés par vissage ; - 4 Moteurs électriques ; - 2 boitiers de contrôle ; - Matériels pneumatiques.
Machine de contrôle qualité pour transmissions assemblées, destinée à assurer la fonction de banc de contrôle. La machine est composée des éléments suivants : - un châssis constitué en acier et aluminium ; - des éléments usinés assemblés par vissage ; - une armoire de commande ; - un dispositif de commande et une barrière immatérielle ; - un ordinateur associé à un écran et un lecteur code à barres ; - un écran dédié à l’Interface Homme Machine (IHM) ; - des matériels pneumatiques ; - des moteurs électriques ; - un support et un système de pesée des transmissions. Les dimensions de la machine sont les suivantes : 1900 x 1480 x 3000 mm, pour un poids de 454 kg.
Dle deklarovaných údajů se jedná o zařízení k testování herních konzolí. Zboží testuje (zkouší) funkčnost komunikace prostřednictvím síťového rozhraní, větrák, optickou mechaniku, SSD disk, teplotu během zkoušky a provádí zátěžový test celého systému. Výrobek rovněž nahrává nejnovější operační systém, pokud již není v herní konzoli obsažen. Zboží se skládá z průmyslového počítače, regálu se sloty pro umístění 24 testovaných konzolí, napájecího zdroje, propojovacích kabelů a síťového switche.
Dle deklarovaných údajů se jedná o zařízení pro testování (zkoušení) bezdrátových herních ovladačů. K výrobku se připojuje testovaný herní ovladač přes USB kabel, veškerá komunikace mezi výrobkem a herním ovladačem probíhá přes USB rozhraní. Během testu se měří elektrický proud procházející ovladačem, a dále rychlost odezvy všech tlačítek na ovladači mačkaných obsluhou po výzvě testovacího softwaru. Zařízení se skládá z průmyslového počítače s testovacím softwarem (ve skříni na kolečkách), multimetru (pro měření elektrického proudu procházejícího ovladačem), napájecího zdroje, kabelů a z USB interface, který propojuje zařízení s herním ovladačem.
Dle poskytnutých údajů se jedná o zařízení určené k testování komunikace chytrých hodinek a přenosu firmware. Hodinky se pomocí tzv. fixtur připojí k zařízení (fixtury nejsou součástí posuzovaného celku), poté se v kontrolním PC spustí testovací sekvence, proběhne kontrola připojení vysláním datového signálu z PC a zpětnou odpovědí testovaného kusu. Následně dojde u kusů, které úspěšně prošly testem komunikace k přenosu dat a kontrole přenosu.
Dle poskytnutých údajů se jedná o zkušební zařízení určené k provádění testů funkčnosti reproduktoru a mikrofonu chytrých hodinek. V zařízení je měřen výstup z reproduktoru a vstup z mikrofonu na předem definovaných frekvencích. Kromě frekvence je měřena i amplituda zaznamenaného signálu. K vyhodnocení rozdílů dochází prostřednictví kontrolního PC.
Notes that govern this classification
Zu Unterposition 9031 20 00: Prüfstände für Einspritzpumpen von Dieselmotoren bestehen im Wesentlichen aus einem Elektromotor und einer Vorrichtung mit Injektoren und graduierten Glasröhren zum Kontrollieren des Ausstoßes der Pumpenelemente. Das Ganze ist auf einem gemeinsamen Gestell befestigt und kann auch mit einem Hilfsapparat (Stroboskop) ausgerüstet sein, mit dem der genaue Zeitpunkt des Einspritzens des Treibstoffes kontrolliert werden kann.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 129/2005 der Kommission vom 20. Januar 2005 (ABl. EU Nr. L 25/37) (RV L 129/05) geändert durch Berichtigung vom 12. Februar 2005 (ABl. L 42), geändert durch Berichtigung vom 12. Mai 2005 (ABl. EU Nr. L 120/42), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1): 3. Ein Netzwerkanalysator, bestehend aus einem Analysatormodul, einem Zwischenspeicher und einer Schnittstelle zu einer automatischen Datenverarbeitungsmaschine (ADV-Maschine), in einem einzigen Gehäuse. Der Analysator ist konzipiert, um Informationen über die Leistung von Netzwerken durch die Anzeige der Netzwerkaktivität, der Dekodierung aller wichtigen Protokolle und der Generierung von Netzwerkverkehr zu liefern. Die ADV-Maschine wird nicht mit dem Analysator gestellt. …
Gerichtliche Entscheidungen (GE) - national Urteil des Finanzgerichts des Landes Brandenburg vom 14.3.2001 – 4 K 743/00 – Einreihung von Geräten zur Feststellung des Körperfettanteils (Body – Mass – Index – BMI). Urteil des Finanzgerichts Hamburg vom 10. Juni 2013 - 4 K 91/12 Einreihung von sog. Ultraschallgeräten zur zerstörungsfreien Materialprüfung Leitsatz Ultraschallgeräte zur zerstörungsfreien Materialprüfung erfüllen die Funktionen „Messen“ und „Prüfen“ und sind daher in die Unterposition 9031 8034 1 KN einzureihen. Dass durch das Messen und Prüfen Fehler der zu prüfenden Werkstücke aufgefunden werden, stellt sich nicht als eigenständige Funktion „Fehlersuche“ dar. 1 Anmerkung: ab 1.1.2017 zutreffender KN-Code 9031 80 20
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Der Ausschuss für den Zollkodex - Fachbereich zolltarifliche und statistische Nomenklatur (Bereich Textiles und Mechanik/Verschiedenes) - hat auf der 151. Sitzung vom 26. bis 29. Mai 2015 über die Einreihung von sog. „ABS-Sensoren“ (WHEEL SENSOR ASSY) mehrheitlich wie folgt entschieden: Der Begründung der Durchführungsverordnung (EU) 2015/805 der Kommission vom 19. Mai 2015 („Drehratensensor“) folgend ist der sog. „ABS-Sensor“ (WHEEL SENSOR ASSY) in die Position 9031 einzureihen. Hiernach ist eine Einreihung in die Position 9029 für solche Apparate ausgeschlossen, die bestimmte Größen (z. B. Geschwindigkeit, Umdrehungen oder Entfernungen) aufnehmen oder messen, das Messergebnis aber nicht selbst anzeigen (z. B. auf einem Bildschirm). …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 9031.20.00.00 cover?
Code 9031.20.00.00 covers Test benches. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 9031.20.00.00?
The third-country duty rate for 9031.20.00.00 is 2.8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 9031.20.00.00?
The first six digits form the HS code: 903120. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 9031.20.00.00 have?
9031.20.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 9031.20.00.00 sit in the tariff?
9031.20.00.00 sits in this hierarchy: 90 OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF > 9031 Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors > 903120 Test benches. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 9031.20.00.00?
Yes. The EBTI database holds decisions on 9031.20.00.00, for example DEBTI53378/24-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 9031.20.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 9031.20.00.00 to 2B116, 2B232, 7B003, 7B103, 9B107, 9B117, 2B116. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 9031.20.00.00 change?
9031.20.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.