Customs tariff code 9606.10.00.00: Press-fasteners, snap-fasteners and press studs and parts therefor
Reference data as at 1 July 2026
Customs tariff code 9606.10.00.00 covers Press-fasteners, snap-fasteners and press studs and parts therefor. The third-country duty rate is 3.7 %, plus import VAT.
9606.10.00.00 is TARIC code in the EU customs tariff, in chapter 96. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 9606.10.00.00
- Third-country duty
- 3.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 96MISCELLANEOUS MANUFACTURED ARTICLES
- 9606Buttons, press-fasteners, snap-fasteners and press studs, button moulds and other parts of these articles; button blanks
- 9606.10Press-fasteners, snap-fasteners and press studs and parts therefor
- 9606.10.00.00Press-fasteners, snap-fasteners and press studs and parts therefor
From HS code to customs tariff code 9606.10.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Bei dem Erzeugnis handelt es sich um Druckknöpfe aus Messing. Die Druckknöpfe sind in verschieden großen Sets (20 Stück, 16 Stück oder 4 Stück) aufgemacht und besitzen einen Durchmesser von 9 mm, 11 mm und 15 mm. Die Waren dienen als Verschluss von Bekleidungsstücken. Die verpackten Erzeugnisse werden als „Druckknöpfe“ eingereiht.
Bei dem Erzeugnis handelt es sich um Druckknöpfe aus einer Zinklegierung. Das Set beinhaltet insgesamt 32 Stück mit verschiedenen Größen (9mm, 11mm, 13mm, 15mm je 8 Stück) und ist in schwarz oder silber erhältlich. Die verpackten Erzeugnisse werden als „Druckknöpfe“ eingereiht.
Bouton pression pour vêtement, en laiton, composé d’une grosse perle en ABS, de strass en verre, d’un anneau en laiton et d’un remplissage en polyester. Les boutons peuvent se présenter sous différentes tailles.
Dle deklarovaných údajů a předložené fotodokumentace se jedná o čtyřdílný sedlářský stiskací knoflík (WUK). Používá se především ke spojování různě silných látek a kůží, zejména v kynologii a sedlářské výrobě - pro výrobu obojků, postrojů pro psy a kočky, pro výrobu opasků, dále v obuvnictví, oděvním průmyslu (bundy, vesty), brašnářství (aktovky, pouzdra, obaly), atd. Materiál: ocel s různou povrchovou úpravou (nikl, staromosaz, černý nikl, staroměď, pomosazeno, atd.). Velikost je v rozmezí 8 mm až 15 mm (průměr hlavičky).
Dle deklarovaných údajů a předložené fotodokumentace se jedná o čtyřdílný sedlářský nýtovací knoflík (DRUK). Používá se především ke spojování různě silných látek a kůží, zejména v kynologii a sedlářské výrobě - pro výrobu obojků, postrojů pro psy a kočky, pro výrobu opasků, dále v obuvnictví, oděvním průmyslu (bundy, vesty), brašnářství (aktovky, pouzdra, obaly), atd. Materiál: ocel s různou povrchovou úpravou (nikl, staromosaz, černý nikl, staroměď, pomosazeno, atd.). Velikost je v rozmezí 8 mm až 15 mm (průměr hlavičky).
Bei dem Erzeugnis handelt es sich um noch nicht zusammengesetzte Druckknöpfe aus Metall und aus Kunststoff (Polyoxymethylen). Die in einem Durchmesser von ca. 0,5 cm bis ca. 1 cm großen Erzeugnisse bestehen aus Niete, Öse und Kugel aus Metall oder aus Niete und Kappe aus Kunststoff. Zusammen bilden die Bestandteile einen Druckknopf. Die in einem verschließbare Sortierbehälter aus Kunststoff verpackten Erzeugnisse werden als „Druckknöpfe“ eingereiht.
Boutons-pression pour vêtements. Ces boutons en cuivre sont présentés sous 2 références.
Bei dem Erzeugnis handelt es sich um Druckknöpfe aus einer Zinklegierung. Das Set beinhaltet insgesamt 32 Stück mit verschiedenen Größen (9mm, 11mm, 13mm, 15mm je 8 Stück) und ist in schwarz oder silber erhältlich. Die verpackten Erzeugnisse werden als „Druckknöpfe“ eingereiht.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Kleiderknöpfe, Wäscheknöpfe und ähnliche Waren, die als Verschluss oder als Verzierung von Bekleidungsstücken, Haushaltswäsche usw. verwendet werden. Diese Waren können aus verschiedenen Stoffen bestehen und echte Perlen, Zuchtperlen, Edelsteine, Schmucksteine (natürliche, synthetische oder rekonstituierte Steine), Edelmetalle oder Edelmetallplattierungen aufweisen, vorausgesetzt, dass die genannten Materialien nur geringfügige Verzierungen oder unwesentliche Zutaten darstellen. Andernfalls sind sie in das Kapitel 71 einzureihen. Die in der Knopffabrikation hauptsächlich verwendeten Stoffe sind unedle Metalle, Holz, Steinnuss, Dumpalmnuss, Bein, Natur-Horn, Kunststoff, keramische Stoffe, Glas, Hartkautschuk, Presspappe, Leder (Naturleder oder rekonstituiertes Leder), Perlmutter, Elfenbein, Schildpatt usw. …
1. Zu Kapitel 96 gehören nicht: a) Schminkstifte und Stifte für die Körperpflege (Kapitel 33) (RV E9601A00); b) Waren des Kapitels 66 (z. B. Teile von Regenschirmen oder Gehstöcken) (RV E9601B00); c) Fantasieschmuck (Position 7117) (RV E9601C00); d) Teile mit allgemeiner Verwendungsmöglichkeit im Sinne der Anmerkung 2 zu Abschnitt XV, aus unedlen Metallen (Abschnitt XV), und gleichartige Waren aus Kunststoff (Kapitel 39) (RV E9601D00); e) Waren des Kapitels 82 (Werkzeuge, Schneidwaren, Essbestecke) mit Griffen oder Teilen aus Schnitz- oder Formstoffen; gesondert gestellt gehören diese Griffe und Teile zu Position 9601 oder 9602 (RV E9601E00); f) Waren des Kapitels 90 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 9606.10.00.00 cover?
Code 9606.10.00.00 covers Press-fasteners, snap-fasteners and press studs and parts therefor. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 9606.10.00.00?
The third-country duty rate for 9606.10.00.00 is 3.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 9606.10.00.00?
The first six digits form the HS code: 960610. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 9606.10.00.00 have?
9606.10.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 9606.10.00.00 sit in the tariff?
9606.10.00.00 sits in this hierarchy: 96 MISCELLANEOUS MANUFACTURED ARTICLES > 9606 Buttons, press-fasteners, snap-fasteners and press studs, button moulds and other parts of these articles; button blanks > 960610 Press-fasteners, snap-fasteners and press studs and parts therefor. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 9606.10.00.00?
Yes. The EBTI database holds decisions on 9606.10.00.00, for example DEBTI21418/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 9606.10.00.00 change?
9606.10.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.