Classification

Customs tariff code for Folienkondensator: 8532.25.00.00

Reference data as at 1 July 2026

Folienkondensator is generally classified to customs tariff code 8532.25.00.00: Dielectric of paper or plastics. The third-country duty rate is 0 %.

This rests on 7 binding tariff rulings whose goods description opens with this term. 100 percent of them reached 8532.25.00.00.

This page answers the customs code question for Folienkondensator from the official decisions themselves rather than from a keyword list. It shows the classification path, the duty rate, the rulings issued for these goods, and the notes that govern them.

Your specific goods still decide the outcome. Material, function, and intended use govern the classification, so a product that differs from the cases below may belong under a different code.

Customs code
8532.25.00.00
Third-country duty
0 %
Rulings behind this
7
Agreement
100 %

Binding tariff information for this code

DEBTI40174/24-1Issued by DEValid until 2027-12-01

Folienkondensator, - mit einem Dielektrikum aus Kunststofffolie in einem quaderförmigen Gehäuse mit zwei elektrischen Anschlussdrähten, - für eine feste Kapazität von 4,7 µF sowie einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, nicht von der TARIC-Position 8532 1000 00 erfasst, Kunststoffkondensator"

DEBTI8750/24-1Issued by DEValid until 2027-06-09

Folienkondensator, (Abbildung siehe Anlage), - mit einem Dielektrikum aus Kunststofffolie (MKP), in einem Kunststoffgehäuse mit zwei elektrischen Anschlüssen (Abmessungen ca. 31 x 21 x 12 mm), für eine Kapazität von 2,2 µF, für eine Spannung von 275 VAC bei 50/60 Hz, - mit einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, kein Leistungskondensator, Kunststoffkondensator - Folienkondensator"

DEBTI35148/23-1Issued by DEValid until 2026-11-29

Folienkondensator - mit einem Dielektrikum aus Kunststofffolie (MKPH), in einem Kunststoffgehäuse mit zwei elektrischen Anschlüssen (Abmessungen ca. 35 x 24 x 15 mm), für eine Kapazität von 0,16 μF,- mit einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, kein Leistungskondensator, Kunststoffkondensator - Folienkondensator"

DEBTI1660/21-1Issued by DEValid until 2024-05-19

Folienkondensator, (Abbildung siehe Anlage), - mit einem Dielektrikum aus Kunststofffolie (MKP), in einem Kunststoffgehäuse mit zwei elektrischen Anschlüssen (Abmessungen ca. 31 x 21 x 12 mm), für eine Kapazität von 2,2 µF, für eine Spannung von 275 VAC bei 50/60 Hz, - mit einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, kein Leistungskondensator, Kunststoffkondensator - Folienkondensator"

DEBTI31851/20-1Issued by DEValid until 2023-11-15

Folienkondensator - mit einem Dielektrikum aus Kunststofffolie (MKP-X2), in einem Kunststoffgehäuse mit zwei elektrischen Anschlüssen (Abmessungen ca. 41,5 x 22 x 17,3 mm), für eine Kapazität von 3,3 µF, - mit einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, kein Leistungskondensator, Kunststoffkondensator - Folienkondensator"

DEBTI31850/20-1Issued by DEValid until 2023-11-15

Folienkondensator - mit einem Dielektrikum aus Kunststofffolie (MKPH), in einem Kunststoffgehäuse mit zwei elektrischen Anschlüssen (Abmessungen ca. 41,5 x 24 x 19 mm), für eine Kapazität von 0,68 µF, - mit einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, kein Leistungskondensator, Kunststoffkondensator - Folienkondensator"

DEBTI31848/20-1Issued by DEValid until 2023-11-12

Folienkondensator - mit einem Dielektrikum aus Kunststofffolie (MKPH), in einem Kunststoffgehäuse mit zwei elektrischen Anschlüssen (Abmessungen ca. 35 x 24 x 15 mm), für eine Kapazität von 0,16 µF, - mit einer Blindleistung von weniger als 0,5 kvar. "Elektrischer Festkondensator, kein Leistungskondensator, Kunststoffkondensator - Folienkondensator"

Where this code sits in the tariff

  1. 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
  2. 8532Electrical capacitors, fixed, variable or adjustable (pre-set)
  3. 8532.25Dielectric of paper or plastics
  4. 8532.25.00.00Dielectric of paper or plastics

From HS code to customs tariff code 8532.25.00.00

HS code8532.256 digits, uniform worldwide
CN code8532.25.008 digits, EU Combined Nomenclature
TARIC code8532.25.00.0010 digits, carries the EU measures

Duty rates and preferences

OriginDuty rateBasis
Third-country duty0 %MFN
Switzerland0 %Tariff preference
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
Türkiye0 %Customs Union Duty
San Marino0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Compliance regimes on this code

Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.

Possible dual-use control codes

Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.

  • 3A001eElectronic items as follows:
  • 3A201aElectronic components, other than those specified in 3A001, as follows;
  • 3A001Electronic items as follows:
  • 3A201Electronic components, other than those specified in 3A001, as follows;

Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.

Notes that govern this classification

Pos. 8532

Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 1217/2014 der Kommission vom 11. November 2014 (ABl. EU Nr. L 329/17) (RV L 1217/14) 1. Eine Ware (sogenannter elektrischer Filter), bestehend aus einem mehrschichtigen Keramikdurchgangskondensator für die Oberflächenmontage, mit Abmessungen von etwa 8 × 3 × 3 mm. Sie ist als Tiefpassfilter zur Verwendung als Filter für elektromagnetische Interferenzen (EMI- Filter) z. B. in Verstärkern, Stromversorgungseinheiten, Temperatur- und Motorenreglern und Treiberschaltungen aufgemacht. Siehe Abbildung 1. Unterposition 8532 24 00 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2a zu Abschnitt XVI sowie nach dem Wortlaut der KN-Codes 8532 und 8532 24 00. Die Ware wird als Bestandteil in einer Reihe von Maschinen verwendet. …

Kapitel 85

1. Zu Kapitel 85 gehören nicht: a) Bettdecken, Heizkissen, Fußwärmer und ähnliche Gegenstände, mit elektrischer Heizvorrichtung; Kleidung, Schuhe, Ohrenschützer und andere am Körper zu tragende Gegenstände, mit elektrischer Heizvorrichtung (RV E8501A00); b) Glaswaren der Position 7011 (RV E8501B00); c) Maschinen, Apparate und Geräte der Position 8486 (RV E8501C00); d) Staubsauger von der für medizinische, chirurgische, zahnärztliche oder tierärztliche Zwecke verwendeten Art (Position 9018) (RV E8501D00); oder e) elektrisch beheizte Möbel des Kapitels 94 (RV E8501E00). 2. Waren, die sowohl den Positionen 8501 bis 8504 als auch der Position 8511, 8512, 8540, 8541 oder 8542 zugewiesen werden können, sind in eine der fünf zuletzt genannten Positionen einzureihen (RV E8502100). Quecksilberdampfgleichrichter mit Metallgefäß gehören jedoch zu Position 8504 (RV E8502200). 3. …

Abschnitt XVI

1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …

Subdivisions of this code

Frequently asked questions

What is the customs tariff code for Folienkondensator?

In the binding tariff rulings analysed here, Folienkondensator is predominantly classified to 8532.25.00.00: Dielectric of paper or plastics. For your own goods, material, function, and intended use are what decide.

What is the duty rate for Folienkondensator?

Code 8532.25.00.00 carries a third-country duty rate of 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.

What is the HS code for Folienkondensator?

The first six digits are HS code 853225, uniform worldwide. The further digits carry the EU and national subdivisions.

What is this answer based on?

On 7 binding tariff rulings from the EBTI database whose goods description opens with this term, 100 percent of which were classified to 8532.25.00.00. The decisions are listed on this page with their reference and goods description.

Could a different code apply to my goods?

Yes. A binding tariff ruling binds only for the goods it was issued for and only for its holder. If your product differs in material, construction, or intended use, another code may apply. Your own BTI is what gives legal certainty in a specific case.

The full reference for this code

One product answered. What about the other thirty thousand?

Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources on every decision, compliance screening, and audit-ready reports.