Customs tariff code for Speicher-Unterteil: 8479.90.70
Reference data as at 1 July 2026
Speicher-Unterteil is generally classified to customs tariff code 8479.90.70: Parts, andere, andere.
This rests on 6 binding tariff rulings whose goods description opens with this term. 100 percent of them reached 8479.90.70.
This page answers the customs code question for Speicher-Unterteil from the official decisions themselves rather than from a keyword list. It shows the classification path, the duty rate, the rulings issued for these goods, and the notes that govern them.
Your specific goods still decide the outcome. Material, function, and intended use govern the classification, so a product that differs from the cases below may belong under a different code.
- Customs code
- 8479.90.70
- Third-country duty
- See subdivision
- Rulings behind this
- 6
- Agreement
- 100 %
Binding tariff information for this code
Speicher-Unterteil - in Form eines verwendungsspezifisch nach Werkzeichnung gefertigten, korbbogenförmigen Schmiede- Rohteils (Außendurchmesser 126,5 mm) aus Stahl, mit einem Sechskant und Gewindeanschluss im Kuppelbereich sowie Schweißnaht-Vorbereitung an der Stirnfläche, - zum Verschweißen mit einem Speicher-Oberteil zu einem Gehäuse (Druckbehälter) eines hydropneumatischen Speichers (Hydro-Membranspeicher) zum Druckausgleich in Flüssigkeitssystemen. "Teil, erkennbar ausschließlich bestimmt für Apparate mit eigener Funktion, in Kapitel 84 anderweit weder genannt noch inbegriffen, keine Ware der Unterpositionen (KN) 8479 9015 bis 8479 9020 - Speicher-Unterteil"
Speicher-Unterteil - in Form eines verwendungsspezifisch nach Werkzeichnung gefertigten, korbbogen- förmigen Schmiede-Rohteils (Außendurchmesser 114 mm) aus Stahl, mit Gewinde- anschluss im Kuppelbereich und Außengewinde an der Stirnfläche, - zum Verschrauben mit einem Speicher-Oberteil zu einem Gehäuse (Druckbehälter) eines hydropneumatischen Speichers (Hydro-Membranspeicher) zum Druckausgleich in Flüssigkeitssystemen. "Teil, erkennbar ausschließlich bestimmt für Apparate mit eigener Funktion, in Kapitel 84 anderweit weder genannt noch inbegriffen, keine Ware der Unterpositionen (KN) 8479 9015 bis 8479 9020 - Speicher-Unterteil für Hydro-Membranspeicher"
Where this code sits in the tariff
From HS code to customs tariff code 8479.90.70
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B005Plant specially designed for the fabrication of "nuclear reactor" fuel elements and specially designed or prepared equipment therefor.
- 0B006Plant for the reprocessing of irradiated "nuclear reactor" fuel elements, and specially designed or prepared equipment and components therefor.
- 0B007Plant for the conversion of plutonium and equipment specially designed or prepared therefor, as follows:
- 1A006aEquipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
- 1B001aEquipment designed for the "production" of "composite" structures or laminates or "fibrous or filamentary materials", as follows, and specially designed components and accessories therefor:
- 1B001bEquipment designed for the "production" of "composite" structures or laminates or "fibrous or filamentary materials", as follows, and specially designed components and accessories therefor:
- 1B001dEquipment designed for the "production" of "composite" structures or laminates or "fibrous or filamentary materials", as follows, and specially designed components and accessories therefor:
- 1B101aEquipment, other than that specified in 1B001, for the "production" of structural composites as follows; and specially designed components and accessories therefor:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1400/2001 der Kommission vom 10. Juli 2001 1) (RV L 1400/01), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1): Flüssigseifenspender in Form eines Behälters aus unedlem Metall, auf dem eine mittels Druckknopfs zu betätigende Kolbenpumpe angebracht ist, die aus einer Kolbenfeder, einem Verschlusskolben, einem Bügel und einem Kolbenrohr besteht. Siehe Fotografie 2) Unterposition 8479 89 97 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie dem Wortlaut der KN - Codes 8479, 8479 89 und 8479 89 97. Verordnung (EU) Nr. 315/2011 der Kommission vom 30. März 2011 (ABl. EU Nr. L 86/59) (RV L 315/11): Elektromechanische Maschine (sog. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg vom 20. Oktober 2016, Az: 4 K 20/15: Einreihung von SCARA-Industrierobotern Leitsatz 1. Erläuterungen zum Harmonisierten System sind ausschließlich in den Vertragssprachen Englisch und Französisch authentisch. 2. SCARA-Industrieroboter, an die verschiedene Werkzeuge oder Greifer montiert werden können, so dass die Roboter andere Funktionen als das Heben, Beladen, Entladen oder Fördern im Sinne der Position 8428 KN ausführen können, sind als Industrieroboter, anderweit weder genannt noch inbegriffen, in die Unterposition 8479 50 00 KN einzureihen. Gerichtliche Entscheidungen (GE)
Zu Position 8479 gehören jedoch stets Maschinen, die aus beliebigen Stoffen Bindfäden, Seile, Taue oder Kabel herstellen (z. B. Litzenschlagmaschinen, Seilschlagmaschinen und Kabelmaschinen) (RV E8408200). 9. Im Sinne der Position 8470 gilt der Begriff „im Taschenformat“ nur für Geräte, deren Abmessungen 170 mm x 100 mm x 45 mm nicht übersteigen (RV E8409000). 10. Im Sinne der Position 8485 bezeichnet der Begriff „additive Fertigung“ (auch als 3D-Druck bezeichnet) den Aufbau physischer Gegenstände anhand eines digitalen Modells durch schichtweises Auftragen sowie Härtung und Verfestigung eines Werkstoffs (z. B. von Metall, Kunststoffen oder Keramik) (RV E8410100). …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
- 8479.90.70.10For use in civil aircraft
- 8479.90.70.30Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8479.90.70.40Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: -of a circular shape, -made of steel alloy with sintering process, -with not more than 8 oil chambers, -with a Rockwell hardness of 55 or more, -with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³
- 8479.90.70.60High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
- 8479.90.70.85Injectors with solenoid valve for optimised atomisation in the engine combustion chamber
- 8479.90.70.99Other
Frequently asked questions
What is the customs tariff code for Speicher-Unterteil?
In the binding tariff rulings analysed here, Speicher-Unterteil is predominantly classified to 8479.90.70: Parts, andere, andere. For your own goods, material, function, and intended use are what decide.
What is the duty rate for Speicher-Unterteil?
TARIC holds no third-country rate of its own for 8479.90.70. The rate follows from the declarable commodity code beneath it.
What is the HS code for Speicher-Unterteil?
The first six digits are HS code 847990, uniform worldwide. The further digits carry the EU and national subdivisions.
What is this answer based on?
On 6 binding tariff rulings from the EBTI database whose goods description opens with this term, 100 percent of which were classified to 8479.90.70. The decisions are listed on this page with their reference and goods description.
Could a different code apply to my goods?
Yes. A binding tariff ruling binds only for the goods it was issued for and only for its holder. If your product differs in material, construction, or intended use, another code may apply. Your own BTI is what gives legal certainty in a specific case.
One product answered. What about the other thirty thousand?
Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources on every decision, compliance screening, and audit-ready reports.