Customs tariff code for Stahlring: 8482.99.00
Reference data as at 1 July 2026
Stahlring is generally classified to customs tariff code 8482.99.00: Teile, andere. The third-country duty rate is 8 %.
This rests on 9 binding tariff rulings whose goods description opens with this term. 100 percent of them reached 8482.99.00.
This page answers the customs code question for Stahlring from the official decisions themselves rather than from a keyword list. It shows the classification path, the duty rate, the rulings issued for these goods, and the notes that govern them.
Your specific goods still decide the outcome. Material, function, and intended use govern the classification, so a product that differs from the cases below may belong under a different code.
- Customs code
- 8482.99.00
- Third-country duty
- 8 %
- Rulings behind this
- 9
- Agreement
- 100 %
Binding tariff information for this code
Stahlring, Foto siehe Anlage, - laut Antrag: -- aus einem ringförmigen Stahlkörper mit Montagebohrungen an der Ober- und Unterseite, -- zur Verwendung als Außenring eines Kugellagers für verschiedene Verwendungszwecke (z. B. Baumaschinen, Bohrgeräte). "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel"
Stahlring, Foto siehe Anlage, - laut Antrag: -- aus einem ringförmigen Stahlkörper mit einer speziell zur Aufnahme von Kugeln bestimmten inneren Laufbahn, -- zur Verwendung als Außenring eines Kugellagers für verschiedene Verwendungzwecke (z. B. Baumaschinen, Bohrgeräte). "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel"
Stahlring, Fotos siehe Anlage, - laut Antrag: -- aus einem ringförmigen Stahlkörper mit einer speziell zur Aufnahme von Kugeln bestimmten äußeren Laufbahn, -- zur Verwendung als Innenring eines Kugellagers für verschiedene Verwendungzwecke (z. B. Baumaschinen, Bohrgeräte) vorgesehen. "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel"
Stahlring, Foto siehe Anlage, - aus einem ringförmigen Stahlkörper mit einer speziell zur Aufnahme von Kugeln bestimmten inneren Laufbahn, mit einem Außendurchmesser von 25 mm, einem Innendurchmesser von 18,05 mm und einer Dicke von 1,5 mm - zur Verwendung als Laufring eines Axial-Rillenkugellagers (nicht Gegenstand dieser vZTA) "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel, kein Messingkäfig"
Stahlring, Fotos siehe Anlage, - laut Antrag: -- aus einem ringförmigen Stahlkörper mit Montagebohrungen an der Ober- und Unterseite, -- zur Verwendung als Außenring eines Kugellagers für verschiedene Verwendungzwecke (z. B. Baumaschinen, Bohrgeräte). "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel"
Stahlring, Foto siehe Anlage, - laut Antrag: -- aus einem ringförmigen Stahlkörper mit einer speziell zur Aufnahme von Kugeln bestimmten inneren Laufbahn, -- zur Verwendung als Außenring eines Kugellagers für verschiedene Verwendungzwecke (z. B. Baumaschinen, Bohrgeräte). "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel"
Stahlring, Fotos siehe Anlage, - laut Antrag: -- aus einem ringförmigen Stahlkörper mit einer speziell zur Aufnahme von Kugeln bestimmten äußeren Laufbahn, -- zur Verwendung als Innenring eines Kugellagers für verschiedene Verwendungzwecke (z. B. Baumaschinen, Bohrgeräte) vorgesehen. "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel"
Stahlring Foto siehe Anlage - aus einem ringförmigen Stahlkörper mit einer speziell zur Aufnahme von Kugeln bestimmten inneren Laufbahn, mit einem Außendurchmesser von 25 mm, einem Innendurchmesser von 18,05 mm und einer Dicke von 1,5 mm - zur Verwendung als Laufring eines Axial-Rillenkugellagers (nicht Gegenstand dieser vZTA) "Teil, erkennbar hauptsächlich für Wälzlager (Kugellager) bestimmt, keine Kugel, Rolle oder Nadel, kein Messingkäfig"
Where this code sits in the tariff
From HS code to customs tariff code 8482.99.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 8 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001bPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 2A001aAnti-friction bearings, bearing systems and components, as follows:
- 0B001Plant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 2A001Anti-friction bearings, bearing systems and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Notes that govern this classification
Zu Unterposition 8482 99: 1. Fertiger Innenring für ein Kegelrollenlager mit Flansch (Innendurchmesser: 54 mm), aus Stahl. Anwendung der Allgemeinen Vorschriften 1 (Anmerkung 2 (b) zu Abschnitt XVI) und 6.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1141/2008 der Kommission vom 13. November 2008 (ABl. EU Nr. L 308/9 vom 19. November 2008): Lineares Bewegungssystem bestehend aus einer Gleitvorrichtung mit zwei Führungsschienen und einem rechteckigen Gehäuse für Kugeln. Das Gehäuse wird durch die Kugeln in den Führungsschienen der Gleitvorrichtung bewegt. Das lineare Bewegungssystem wird in verschiedenen Arten von Maschinen verwendet, beispielsweise Güterumschlaganlagen, Werkzeugmaschinen oder DVD-Spielern. Unterposition 8482 10 90 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a) zu Abschnitt XVI sowie dem Wortlaut der KN-Codes 8482, 8482 10 und 8482 10 90. …
Gerichtliche Entscheidungen (GE) - national Einreihung von Profilschienenführungen in die Kombinierte Nomenklatur 1. Urteil des Finanzgerichts München vom 25. April 2001 3 K 5434/99 2. BFH- Beschluss vom 11. April 2002 VIl B 134/01 Der Begriff 'Wälzlager' in der Positionsüberschrift 8482 KN erfasst Kugellager aller Art, und zwar ohne Rücksicht darauf, ob die Gleitvorrichtungen, wie herkömmlich, konzentrisch oder linear angeordnet sind. Denn der Umstand, dass die Führung ‑ wie bei der Profilschienenführung im Streitfall ‑ linear statt wie herkömmlich konzentrisch angeordnet ist und damit die Fortbewegung linear und nicht kreisförmig verläuft, ist kein im Wortlaut der Tarifposition zum Ausdruck gelangtes Einreihungskriterium. Dies wird durch die Erläuterungen bestätigt, wonach Wälzlager eben nur „in der Regel“ aus zwei konzentrischen Ringen (Laufringen) usw. …
Zu Position 8482 gehören nur solche polierten Stahlkugeln, deren Grenzabmaß nicht mehr als ± 1 v. H. vom angegebenen Durchmesser (Nennmaß), höchstens jedoch ± 0,05 mm beträgt (RV E8407100). Stahlkugeln, die dieser Begriffsbestimmung nicht entsprechen, gehören zu Position 7326 (RV E8407200). 8. Maschinen mit vielseitiger Verwendungsmöglichkeit gehören, wenn nichts anderes bestimmt ist und vorbehaltlich der Anmerkung 2 zu Kapitel 84 und der Anmerkung 3 zu Abschnitt XVI, zu der Position, die ihrem Hauptverwendungszweck entspricht. Besteht eine derartige Position nicht oder ist der Hauptverwendungszweck nicht feststellbar, sind sie der Position 8479 zuzuweisen (RV E8408100).
Subdivisions of this code
- 8482.99.00.30Brass cages with the following characteristics: – continuously or centrifugally cast, – turned, – containing by weight 35 % or more, but not more than 38 % of zinc, – containing by weight 0,75 % or more, but not more than 1,25 % of lead, – containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and – with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings
- 8482.99.00.60Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings
- 8482.99.00.70Male and female parts of cages, - made of flat-rolled steel, - with a diameter of 14,5 mm or more but not more than 420 mm, - the male part including rivets, - the female part including holes, used for manufacturing of deep grove ball bearings
- 8482.99.00.80Punched cages of various diameters, - made of flat rolled steel, - with tensile strength of 270 MPa or more, for the production of tapered roller bearings
- 8482.99.00.90Other
Frequently asked questions
What is the customs tariff code for Stahlring?
In the binding tariff rulings analysed here, Stahlring is predominantly classified to 8482.99.00: Teile, andere. For your own goods, material, function, and intended use are what decide.
What is the duty rate for Stahlring?
Code 8482.99.00 carries a third-country duty rate of 8 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for Stahlring?
The first six digits are HS code 848299, uniform worldwide. The further digits carry the EU and national subdivisions.
What is this answer based on?
On 9 binding tariff rulings from the EBTI database whose goods description opens with this term, 100 percent of which were classified to 8482.99.00. The decisions are listed on this page with their reference and goods description.
Could a different code apply to my goods?
Yes. A binding tariff ruling binds only for the goods it was issued for and only for its holder. If your product differs in material, construction, or intended use, another code may apply. Your own BTI is what gives legal certainty in a specific case.
One product answered. What about the other thirty thousand?
Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources on every decision, compliance screening, and audit-ready reports.