Customs tariff code 3901.10.90: Polyethylene having a specific gravity of less than 0,94, anderes
Reference data as at 1 July 2026
Customs tariff code 3901.10.90 covers Polyethylene having a specific gravity of less than 0,94, anderes. The third-country duty rate is 6.5 %, plus import VAT.
3901.10.90 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3901.10.90
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3901.10.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Angaben des Antragstellers: Spezielles Gleitmittel- und Enformungshilfe-Masterbatch auf LDPE-Basis für Polyolefine für Spritzguss und Extrusion. Feststellungen an einem Warenmuster: Es wurde ein weißes Granulat aus Polyethylen mit Additiven vorgelegt. Zur Zusammensetzung liegen vertrauliche Angaben vor. Befund: Anderes Polyethylen in Primärform, mit einer relativen Dichte von weniger als 0 , 94.
Trattasi di una miscela di polietilene a bassa densità e silice sintetica. La silice sintetica è una sostanza minerale spesso aggiunta come carica a materie plastiche. Il prodotto si presenta come una polvere fine di colore bianco contenuta in un contenitore cilindrico di plastica da 200 gr, recante etichetta con logo della ditta produttrice e denominazione commerciale del prodotto.
Polymère de l'éthylène, sous forme primaire, de type polyéthylène, d'une densité inférieure à 0,94 et non linéaire, se présentant sous la forme de granulés en matières plastiques, opaques, d’apparence blanc laiteux, constitués d’un mélange maître contenant 55% de polyéthylène basse densité (LDPE), 30% de silice, et 15% d'erucamide (agent glissant), utilisés pour la fabrication de films plastiques. Ces granulés sont conditionnés pour la vente au détail par sac de 25 unités ou dans des big bag.
Polymère de l'éthylène, sous forme primaire, de type polyéthylène, d'une densité inférieure à 0,94 et non linéaire, se présentant sous la forme de granulés en matières plastiques, de couleur beige, constitués d’un mélange maître contenant 68% de polyéthylène basse densité (LDPE), 18% de silice, 12% d'eurucamide (agent glissant) et d’un anti-oxydant, utilisés pour la fabrication de films plastiques. Ces granulés sont conditionnés pour la vente au détail par sac de 25 unités ou dans des big bag.
Additif routier pour enrobé bitumineux se présentant sous la forme de granulés contenant : du polyéthylène (d'une densité de 0,9) à 68%, du carbonate (20%), de la résine d'origine végétale (dope d'adhésion (6%)) et du bitume (6%). Polyéthylène - 68% Carbonate – 20% Dope d’adhésion – 6% (produit ADR) Bitume – 6%
Angaben des Antragstellers: Nach den Angaben des Antragstellers handelt es sich bei dem vorgelegten Erzeugnis um ein Polyethylen-Granulat niedriger Dichte (LDPE) mit Additiven. Der Rohstoff dient der Herstellung von coextrudierten Verbundfolien im Blaßfolienverfahren. Feststellungen an einem Warenmuster: Es wurde ein weißliches, transparentes Granulat vorgelegt. Befund: Es handelt sich um Polyethylen mit einer Dichte von weniger als 0,94 in Primärform im Sinne der Unterposition (KN) 3901 1090.
Angaben des Antragstellers: Nach den Angaben des Antragstellers handelt es sich bei dem vorgelegten Erzeugnis um ein Polyethylen-Granulat niedriger Dichte (LDPE) zur Herstellung von Gießfolien ohne Zusatzmittel. Der Rohstoff wird mit einer speziellen Technologie hergestellt, um eine hohe Reinheit zu gewährleisten und dient der Herstellung von coextrudierten Verbundfolien. Feststellungen an einem Warenmuster: Es wurde ein weißliches, transparentes Granulat vorgelegt. Befund: Es handelt sich um Polyethylen mit einer Dichte von weniger als 0,94 in Primärform im Sinne der Unterposition (KN) 3901 1090.
Angaben des Antragstellers: Nach den Angaben des Antragstellers handelt es sich bei dem vorgelegten Erzeugnis um einen Antiblock-Masterbatch in Granulatform mit 10 % synthetischer, amorpher Kieselsäure für LDPE-Feinfolien. Zur technischen Spezifikation der Ware liegen vertrauliche Angaben vor. Feststellungen an einem Warenmuster: Es wurde ein trübes, weißes Granulat vorgelegt. Befund: Es liegt ein Kunststoff in Primärform auf Grundlage von Polyethylen mit Zusatzstoffen im Sinne der Position (HS) 3901 vor.
Notes that govern this classification
Zu Unterpositionen 3901 10 10 und 3901 10 90: Hierher gehören nur die Homopolymere des Ethylens, d. h. Polymere, bei denen Ethylen 95 GHT oder mehr zum Gesamtpolymergehalt beiträgt. Die Dichte des Polyethylens ist unter Verwendung eines Polymers ohne Zusatzstoffe zu bestimmen. Flüssiges Polyethylen gehört nur dann hierher, wenn es den Bedingungen der Anmerkung 3 a) zu Kapitel 39 entspricht. Andernfalls gehört es zu den Unterpositionen 2710 12 11 bis 2710 19 99. Polyethylenwachse gehören zu Position 3404.
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3901.10.90 cover?
Code 3901.10.90 covers Polyethylene having a specific gravity of less than 0,94, anderes. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3901.10.90?
The third-country duty rate for 3901.10.90 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3901.10.90?
The first six digits form the HS code: 390110. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3901.10.90 have?
3901.10.90 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3901.10.90 sit in the tariff?
3901.10.90 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3901 Polymers of ethylene, in primary forms > 390110 Polyethylene having a specific gravity of less than 0,94. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3901.10.90?
Yes. The EBTI database holds decisions on 3901.10.90, for example DEBTI45519/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3901.10.90 change?
3901.10.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.