Customs tariff code 3901.90.80: Other, andere
Reference data as at 1 July 2026
Customs tariff code 3901.90.80 covers Other, andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3901.90.80 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3901.90.80
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3901.90.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Een zogenoemd kunststofcompound met -volgens opgave- onder andere de volgende samenstelling en kenmerken: - een maleïnezuuranhydride gefunctionaliseerde LLDPE; - geproduceerd via extrusie; - bestemd als hechtlaag in meerlaagse kunststoffolies; - in de vorm van witte korrels. Verpakt in zakken van 20 kg of dozen van 500 kg.
Angaben des Antragstellers: Rohstoff für die Herstellung von Kaltfließverbesserern für Dieselkraftstoff Zur Zusammensetzung liegen vertrauliche Angabe vor. Feststellungen an einem Warenmuster: Milchig-weiße, viskose Masse Nach der vorliegenden Rezeptur liegt ein Copolymer aus überwiegend Polyethylen vor. Das Copolymer ist mit geringen Mengen weiterer Additive versehen. Aufgrund der flüssig-viskosen Eigenschaft des Produkts scheidet eine Einreihung in das Kapitel 34 aus. Es liegt kein synthetisches Wachs im Sinne des Kapitel 34 vor. Befund: Polymere des Ethylens, in Primärformen, andere, andere
Angaben: Stoffgemisch aus Polymeren und Copolymeren in Granulatform. Die Ethyleneinheiten überwiegen in der Polymermischung. Das Granulat weist hohe Mengen an Flammschutzmitteln auf und wird zur Herstellung von Kabelisolationen und Kabelmänteln verwendet. Befund: Polymere des Ethylens, in Primärformen, andere, andere
Angaben: Stoffgemisch aus Polymeren und Copolymeren in Granulatform. Die Ethyleneinheiten überwiegen in der Polymermischung. Das Granulat weist hohe Mengen an Flammschutzmitteln auf und wird zur Herstellung von Kabelisolationen verwendet. Befund: Polymere des Ethylens, in Primärformen, andere, andere
Angaben: Stoffgemisch aus Polymeren und Copolymeren in Granulatform. Die Ethyleneinheiten überwiegen in der Polymermischung. Das Granulat weist hohe Mengen an Flammschutzmitteln auf und wird zur Herstellung von Kabelisolationen und Kabelmänteln verwendet. Befund: Polymere des Ethylens, in Primärformen, andere, andere
Angaben: Stoffgemisch aus Polymeren und Copolymeren in Granulatform. Die Ethyleneinheiten überwiegen in der Polymermischung betragen jedoch weniger als 95 GHT. Das Granulat weist hohe Mengen an Flammschutzmitteln auf und wird zur Herstellung von Kabelisolationen und Kabelmänteln verwendet. Befund: Polymere des Ethylens, in Primärformen, andere, andere
Angaben: Es handelt sich um ein Granulat, das aus einer Polymermischung besteht. Die Ethyleneinheiten überwiegen in der Polymermischung. Das Granulat wird zur Herstellung von Kabelisolationen oder Kabelmänteln verwendet. Befund: Andere Polymere des Ethylens, in Primärformen
Granulés de couleur noire dont la partie polymère est composée d'un mélange de polyéthylène (60 %) et de copolymère EVA (40 % - dont 19 % d'acétate de vinyle et 81 % d'éthylène. Ces granulés sont également composés : -de matières minérales (36,7 % d’oxyde de magnésium, 9,1 % de carbonate de magnésium, et 1 % de noir de carbone) ; -et d’autres matières (0,2 % d’antioxydant, 0,1 % de composant de protection anti-UV, et 2,8 % de lubrifiant). L’article est destiné à la fabrication de câbles électriques.
Notes that govern this classification
Zu Unterpositionen 3901 90 30 und 3901 90 80 In Anwendung der Anmerkung 4 und der Unterpositions-Anmerkung 1 zu Kapitel 39 gehören hierher: 1. Copolymere des Ethylens und anderer Monomere (ausgenommen Vinylacetat) (z. B. Copolymere aus Ethylen und Propylen), sowie Gemische von Polymeren analoger Zusammensetzung, bei denen das Ethylenmonomer vorherrscht; 2. chemisch modifiziertes Polyethylen im Sinne der Anmerkung 5 zu Kapitel 39 (z. B. Polyethylenchlorid und Polyethylenchlorosulfid).
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
- 3901.90.80.10For cavity filling, for use in certain types of aircraft
- 3901.90.80.53Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with - an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and - a melt flow rate of 10g/10 min (MFR 125 °C/2.16 kg, ASTM D1238) or more
- 3901.90.80.55Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6 % or more but not more than 50 % by weight, and - a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)
- 3901.90.80.67Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more
- 3901.90.80.73Mixture containing by weight - 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and - 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)
- 3901.90.80.75Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets
- 3901.90.80.85Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets
- 3901.90.80.91Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
- 3901.90.80.92Chlorosulphonated polyethylene
- 3901.90.80.93Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
- 3901.90.80.94Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene
- 3901.90.80.97Chlorinated polyethylene, in the form of powder
- 3901.90.80.99Other
Frequently asked questions
What does customs tariff code 3901.90.80 cover?
Code 3901.90.80 covers Other, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3901.90.80?
TARIC holds no third-country rate of its own for 3901.90.80. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3901.90.80?
The first six digits form the HS code: 390190. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3901.90.80 have?
3901.90.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3901.90.80 sit in the tariff?
3901.90.80 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3901 Polymers of ethylene, in primary forms > 390190 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3901.90.80?
Yes. The EBTI database holds decisions on 3901.90.80, for example NLBTI2026-0123. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3901.90.80 change?
3901.90.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.