Customs tariff code 3902.10.00.20: Polypropylene, containing no plasticiser, - of a melting point of more than 150 °C (as…
Reference data as at 1 July 2026
Customs tariff code 3902.10.00.20 covers Polypropylene, containing no plasticiser, - of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), - of a heat of fusion of 15 J/g or more but not more than 70 J/g, - of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), - of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method). The third-country duty rate is 6.5 %, plus import VAT.
3902.10.00.20 is TARIC code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3902.10.00.20
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3902Polymers of propylene or of other olefins, in primary forms
- 3902.10Polypropylene
- 3902.10.00Polypropylen
- 3902.10.00.20Polypropylene, containing no plasticiser, - of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), - of a heat of fusion of 15 J/g or more but not more than 70 J/g, - of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), - of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)
From HS code to customs tariff code 3902.10.00.20
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| North Macedonia | 0 % | Tariff preference |
| Ukraine | 0 % | Tariff preference |
| GSP - General arrangements | 3 % | Tariff preference |
| Serbia | 0 % | Tariff preference |
| Japan | 0 % | Tariff preference |
| Peru | 0 % | Tariff preference |
| Albania | 0 % | Tariff preference |
| Kosovo | 0 % | Tariff preference |
| Montenegro | 0 % | Tariff preference |
| New Zealand | 0 % | Tariff preference |
| Mercosur | 5.2 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Polipropileno, sin plastificante, en forma primaria "granza". El producto está compuesto de una sola materia termoplástica (polipropileno). Características: - punto de fusión superior a 150 °C (según la norma ASTM D 3417), - calor de fusión superior o igual a 15 J/g pero inferior o igual a 70|J/g, - elongación de ruptura superior o igual a 1000 % (según la norma ASTM D 638), - módulo de tracción (tensile modulus) superior o igual a 69 MPa pero inferior o igual a 379 MPa (según la norma ASTM D 638)
Polipropileno, sem plastificante, em formas primárias, - de ponto de fusão superior a 150ºC (segundo o método ASTM D 3417), - de calor de fusão igual ou superior a 15 J/g mas não superior a 70 J/g, - de elongação de rotura igual ou superior a 1000% (segundo o método ASTM D 638), - de módulo de tensão (tensil modulus) igual ou superior a 69 MPa mas não superior a 379 MPa (segundo o método ASTM D 638).
Polipropileno, sem plastificante, em formas primárias, - de ponto de fusão superior a 150ºC (segundo o método ASTM D 3417), - de calor de fusão igual ou superior a 15 J/g mas não superior a 70 J/g, - de elongação de rotura igual ou superior a 1000% (segundo o método ASTM D 638), - de módulo de tensão (tensil modulus) igual ou superior a 69 MPa mas não superior a 379 MPa (segundo o método ASTM D 638).
Polipropileno, sem plastificante, em formas primárias, - de ponto de fusão superior a 150ºC (segundo o método ASTM D 3417), - de calor de fusão igual ou superior a 15 J/g mas não superior a 70 J/g, - de elongação de rotura igual ou superior a 1000% (segundo o método ASTM D 638), - de módulo de tensão (tensil modulus) igual ou superior a 69 MPa mas não superior a 379 MPa (segundo o método ASTM D 638).
Polipropileno, sem plastificante, em formas primárias, - de ponto de fusão superior a 150ºC (segundo o método ASTM D 3417), - de calor de fusão igual ou superior a 15 J/g mas não superior a 70 J/g, - de elongação de rotura igual ou superior a 1000% (segundo o método ASTM D 638), - de módulo de tensão (tensil modulus) igual ou superior a 69 MPa mas não superior a 379 MPa (segundo o método ASTM D 638).
Polipropileno, sem plastificante, em formas primárias, - de ponto de fusão superior a 150ºC (segundo o método ASTM D 3417), - de calor de fusão igual ou superior a 15 J/g mas não superior a 70 J/g, - de elongação de rotura igual ou superior a 1000% (segundo o método ASTM D 638), - de módulo de tensão (tensil modulus) igual ou superior a 69 MPa mas não superior a 379 MPa (segundo o método ASTM D 638).
Polipropileno, sin plastificante, en forma primaria "granza". El producto está compuesto de una sola materia termoplástica (polipropileno). Características: -punto de fusión superior a 150 °C (según la norma ASTM D 3417), -calor de fusión superior o igual a 15 J/g pero inferior o igual a 70 J/g, -elongación de ruptura superior o igual a 1000 % (según la norma ASTM D 638), -módulo de tracción (tensile modulus) superior o igual a 69 MPa pero inferior o igual a 379 MPa (según la norma ASTM D 638)
Polipropileno, sin plastificante, en forma primaria "granza". El producto está compuesto de una sola materia termoplástica (polipropileno). Características: - punto de fusión superior a 150 °C (según la norma ASTM D 3417), -calor de fusión superior o igual a 15 J/g pero inferior o igual a 70 J/g, -elongación de ruptura superior o igual a 1000 % (según la norma ASTM D 638), -módulo de tracción (tensile modulus) superior o igual a 69 MPa pero inferior o igual a 379 MPa (según la norma ASTM D 638)
Notes that govern this classification
Zu Unterposition 3902 10 00: Die Erläuterungen zu den Unterpositionen 3901 1010 und 3901 1090, erster Absatz, gelten sinngemäß. Nicht hierher gehört flüssiges Polypropylen, das den Bestimmungen der Anmerkung 3 a) zu Kapitel 39 nicht entspricht, z. B. Tri- und Tetrapropylen (Unterposition 2710 12 11 bis 2710 19 99).
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 314/90 der Kommission vom 5. Februar 1990 (RV L 314/90), geändert durch Verordnung (EG) Nr. 936/1999 der Kommission vom 27. April 19991): 5. Erzeugnis zur Verwendung als Komponente für Schmierstoffe, bestehend aus synthetischen, isoparaffinischen Poly(alpha)olefinen und folgende analytischen Merkmale aufweisend: - Aussehen: farblose, klare, niedrig viskose, ölige Flüssigkeit - Brechungsindex bei 20 ºC: 1,4563 - Asche: Keine - Heteroatome: Schwefel, Halogen, Stickstoff und Phosphor - Negativ - Bromzahl: 0,3 - Vakuumdestillation (1,5 mbar): Siedebeginn über 121 ºC (gleich 300 ºC bei - 1 013 mbar) - IR-Spektrum: zeigt im Wesentlichen die Banden von gesättig- - tenaliphatischen Kohlenwasserstoffen - Dichte bei 20 ºC: 0,8225 kg/l Unterposition 3902 9090 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Aus …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3902.10.00.20 cover?
Code 3902.10.00.20 covers Polypropylene, containing no plasticiser, - of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), - of a heat of fusion of 15 J/g or more but not more than 70 J/g, - of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), - of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method). Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3902.10.00.20?
The third-country duty rate for 3902.10.00.20 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3902.10.00.20?
The first six digits form the HS code: 390210. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3902.10.00.20 have?
3902.10.00.20 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 3902.10.00.20 sit in the tariff?
3902.10.00.20 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3902 Polymers of propylene or of other olefins, in primary forms > 390210 Polypropylene > 39021000 Polypropylen. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3902.10.00.20?
Yes. The EBTI database holds decisions on 3902.10.00.20, for example ES2016SOL0000000000191. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3902.10.00.20 change?
3902.10.00.20 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.