Customs tariff code 3906.90: Acrylic polymers in primary forms, andere
Reference data as at 1 July 2026
Customs tariff code 3906.90 covers Acrylic polymers in primary forms, andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3906.90 is HS subheading in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3906.90
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 4
Where this code sits in the tariff
From HS code to customs tariff code 3906.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Angaben des Antragstellers: Nach den Angaben des Antragstellers sowie den Informationen der beiliegenden Datenblätter handelt es sich bei den vorgelegten Erzeugnissen um Copolymere aus Acrylnitril-Butadien-Styrol und Methylmethacrylat in Form von Granulaten. Der Methylmethacrylatgehalt beträgt 50 - 75 %. Feststellungen an einem Warenmuster: Es wurden zwei transparente, leicht violett gefärbte (Toyolac 910-X01, Toyolac 920-555 IC) sowie drei transparente, leicht grau gefärbte (Toyolac 900-352, Toyolac 920-555, Toyolac 900-352A) Granulate vorgelegt. Befund: Aufgrund der Copolymerzusammensetzung liegt ein Acrylpolymer im Sinne der Unterposition (HS) 3906 90 vor.
Angaben des Antragstellers: Schutzanstrich für Steinoberflächen Zur Zusammensetzung der Ware liegen vertrauliche Informationen vor. Ein Warenmuster wurde nicht vorgelegt. Gemäß Datenblatt handelt es sich um eine schwach gelbe Lösung. Befund: Nach den vorliegenden Angaben liegt ein Copolymer auf Grundlage von Polyacrylaten in Primärform im Sinne der Unterposition (HS) 3906 90 vor.
COPOLYMERE DE TYPE ACRYLIQUE (FABRIQUE A PARTIR DE MPC _2-METHACRYLOYLOXYETHYLPHOSPHORYLCHOLINE_, DE SODIUM METHACRYLATE ET DE BUTYLMETHACRYLATE), EN SOLUTION AQUEUSE A HAUTEUR DE 5%; LA MARCHANDISE SE PRESENTE SOUS LA FORME D'UN LIQUIDE INCOLORE LEGEREMENT EPAIS.
COPOLYMERE DE TYPE ACRYLIQUE (FABRIQUE A PARTIR DE MPC _2-METHACRYLOYLOXYETHYLPHOSPHORYLCHOLINE_ ET DE 2-HYDROXY-3-METHACRYLOYLOXYPROPYLTRIMETHYLAMMONIUMCHLORIDE)EN SOLUTION AQUEUSE A HAUTEUR DE 5%. IL SE PRESENTE SOUS LA FORME D'UN LIQUIDE INCOLORE LEGEREMENT VISQUEUX.
Notes that govern this classification
Zu Unterposition 3906 9090: Hierher gehören Poly(acrylnitril) und Polyacryl-Elastomere (ACM) in Primärformen (nicht vulkanisiert). Nicht hierher gehören: a) Acrylpolymere, die Ionenaustauscher sind (Position 3914 0000). b) Copolymere des Acrylnitrils, die den Bestimmungen der Anmerkung 4 zu Kapitel 40 entsprechen (Kapitel 40).
Erläuterungen zum Harmonisierten System (HS) Unter „Acrylpolymeren“ versteht man Polymere der Acryl- oder der Methacrylsäure, ihrer Salze oder Ester oder der entsprechenden Aldehyde, Amide oder Nitrile. Poly(methylmethacrylat) ist das wichtigste Polymer dieser Gruppe. Es wird wegen seiner ausgezeichneten optischen Eigenschaften und seiner physikalischen Widerstandsfähigkeit als Verglasungsmittel und zum Herstellen von Schildern für den Außenbereich, Werbeartikeln, Augen- und Zahnprothesen und Kontaktlinsen verwendet. Acrylnitril-Polymere können zum Herstellen von synthetischen Fasern verwendet werden. Bezüglich der Einreihung der Polymere (einschließlich Copolymere), der chemisch modifizierten Polymere und Polymergemische siehe die Erläuterungen „Allgemeines“ zu diesem Kapitel. Nicht zu dieser Position gehören: a) Acrylpolymere, die Ionenaustauscher sind (Pos. 3914). …
Zu Unterposition 3906 90: 1. Mischpolymerisat aus einem Acrylsäureester und einem Acrylsäureamid, mit Formaldehyd modifiziert, in wässriger Dispersion, stabilisiert durch Zusatz einer geringen Menge Sulforicinoleat.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) DURCHFÜHRUNGSVERORDNUNG (EU) 2020/186 DER KOMMISSION vom 7. Februar 2020 (ABl. EU Nr. L 39/3) (RV L 20/186): Polyacryl-Elastomere in der Form weißer Blöcke von etwa 63 × 40 × 15 cm, die sich wie folgt zusammensetzen: - aus zwei oder drei Arten von Acrylatmonomeren (Ethylacrylat und einem oder zwei der folgenden Monomere: n-Butylacrylat und 2-Methoxyethylacrylat), - kleinen Mengen an Vernetzungsmonomeren, die Chlor-, Epoxy- oder Carboxylgruppen enthalten; Diese Polyacryl-Elastomere weisen eine Jodzahl von weniger als 4 auf. Unterposition 3906 90 90 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 3906, 3906 90 und 3906 90 90. …
Subdivisions of this code
- 3906.90.10Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
- 3906.90.20Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55 % or more of copolymer
- 3906.90.30Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate
- 3906.90.40Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)
- 3906.90.50Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
- 3906.90.60Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not compounded with silica
- 3906.90.90Other
Frequently asked questions
What does customs tariff code 3906.90 cover?
Code 3906.90 covers Acrylic polymers in primary forms, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3906.90?
TARIC holds no third-country rate of its own for 3906.90. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3906.90?
The first six digits form the HS code: 390690. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3906.90 have?
3906.90 has six digits and matches the globally uniform HS subheading. A German import declaration requires the eleven-digit commodity code.
Where does 3906.90 sit in the tariff?
3906.90 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3906 Acrylic polymers in primary forms. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3906.90?
Yes. The EBTI database holds decisions on 3906.90, for example DE22930/14-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3906.90 change?
3906.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.