Customs tariff code 3907.29.20: Polyetheralkohole, andere
Reference data as at 1 July 2026
Customs tariff code 3907.29.20 covers Polyetheralkohole, andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3907.29.20 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3907.29.20
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3907.29.20
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C111Propellants and constituent chemicals for propellants, other than those specified in 1C011, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Polyéther sous forme primaire, de type Polyol (polyéther-alcool) liquide, destiné à la fabrication de mousse en polyuréthane, utilisée dans les chauffe-eaux. La marchandise se présente sous la forme d'un polymère composé des monomères sorbitol, sucrose, glycérol et glycol, dont aucun ne dépasse 95% en poids de la teneur totale du polymère. La marchandise est conditionnée en cuve.
Angaben des Antragstellers: Halogenfreies-flammwidriges Compound zur Extrusion für Kabelmäntel Zur Zusammensetzung liegen vertrauliche Angaben vor. Demnach liegt ein Compound verschiedener Polymere mit verschiedenen Füllstoffen vor. Bei den Polymeren überwiegen die Polyetheralkohole. Feststellung an einem Warenmuster: Weißes, rundes Granulat (ca. 3 mm Durchmesser und ca. 2 mm hoch). Befund: Andere Polyether, in Primärformen, andere Polyether, andere, Polyetheralkohole, andere
Komponent A: mieszanina polioli polieterowych z dodatkiem środków modyfikujących właściwości reologiczne i użytkowe, w postaci cieczy barwy żółtawej (miodowej). Produkt przeznaczony do mieszania ze składnikiem izocyjanianowym - komponentem B, dzięki czemu otrzymuje się szybko reagującą dwuskładnikową żywicę iniekcyjną, niezawierającą freonu i halogenów, stosowaną do konsolidacji warstw suchych, mokrych i wodonośnych, uszczelniania przed wodą (również słoną) pod ciśnieniem hydrostatycznym z gruntu, zapór lub ścian szybów, napraw mokrych szybów, tuneli, kanałów i ścian. Produkt sprzedawany jest w kanistrach polietylenowych o pojemności 20 dm3, metalowych beczkach o pojemności 18 dm3.
Produkt w postaci klarownej, jednorodnej lepkiej cieczy, koloru bezbarwnego do żółtego, rozpuszczalny w wodzie. Poliol polieterowy otrzymywany w drodze syntezy chemicznej. Zgodnie z oświadczeniem Wnioskodawcy stosowany jako syntetyczny olej bazowy typu PAG wyłącznie jako komponent do formulacji środków smarowych. Ze względu na brak dodatków przeciwkorozyjnych, przeciwzużyciowych i antypiennych, cechy produktu są niewystarczające do samodzielnego użycia jako środek smarowy bez wcześniejszego uszlachetnienia. Produkt pakowany do paletopojemników lub beczek.
Produkt w postaci klarownej, jednorodnej lepkiej cieczy, koloru bezbarwnego do żółtego, rozpuszczalny w wodzie. Poliol polieterowy otrzymywany w drodze syntezy chemicznej. Zgodnie z oświadczeniem Wnioskodawcy stosowany jako syntetyczny olej bazowy typu PAG wyłącznie jako komponent do formulacji środków smarowych. Ze względu na brak dodatków przeciwkorozyjnych, przeciwzużyciowych i antypiennych, cechy produktu są niewystarczające do samodzielnego użycia jako środek smarowy bez wcześniejszego uszlachetnienia. Produkt pakowany do paletopojemników lub autocystern.
Produkt w postaci jasnożółtej, przezroczystej, gęstej cieczy. Mieszanina polioli polieterowych przeznaczona do następujących zastosowań: olej bazowy lub dodatek do produkcji cieczy obróbczych metali i płynów procesowych, do formulacji dedykowanych do przekładni przemysłowych oraz w przemyśle tekstylnym. Składniki mieszaniny powstają w reakcji polimeryzacji w niezależnych procesach syntezy chemicznej. Produkt nie zawiera żadnych dodatków antykorozyjnych; sprzedawany jest w cysternach kolejowych, autocysternach lub innych opakowaniach jednostkowych (DPPL, beczka, kanister).
Produkt w postaci cieczy, bezbarwnej do barwy żółtej. Poliol polieterowy o nazwie Polioksyalkilenowany glikol propylenowy (IUPAC poly[(propylene oxide)-co-(ethylene oxide)]) o nr CAS: 9003-11-6, otrzymywany w drodze syntezy chemicznej w reakcji polimeryzacji. Zgodnie z oświadczeniem Wnioskodawcy produkt ma szerokie zastosowanie, m.in. jako komponent środków smarowych (syntetyczny olej bazowy) oraz jako składnik formulacji do produkcji pianek PUR/PIR. Nie zawiera żadnych dodatków przeciwkorozyjnych, przeciwzużyciowych i antypiennych. Produkt sprzedawany jest w cysternach kolejowych, autocysternach lub innych opakowaniach jednostkowych (DPPL, beczka, kanister).
Produkt w postaci jednorodnej cieczy, bezbarwnej do barwy żółtej. Mieszanina polioli polieterowych, stosowana jako syntetyczny olej bazowy typu PAG jako komponent: do produkcji cieczy obróbczych metali i płynów procesowych, do produkcji formulacji dedykowanych do przekładni przemysłowych oraz w przemyśle tekstylnym. Zgodnie z oświadczeniem Wnioskodawcy, ze względu na brak dodatków przeciwkorozyjnych, przeciwzużyciowych i antypiennych cechy produktu są niewystarczające do użycia jako samodzielny środek smarowy bez wcześniejszego uszlachetnienia. Produkt sprzedawany jest w cysternach kolejowych, autocysternach lub innych opakowaniach jednostkowych (DPPL, beczka, kanister).
Notes that govern this classification
Zu Unterposition 3907 29: 1. Polyamid-Polyether-Polykondensat, ein Block-Copolymer, erhalten durch Polymerisation eines Polyamids mit endständigen Carboxylgruppen (mit einem Überschuss an Adipinsäure polymerisiertes Polyamid-6,6) und einem Polyether mit endständigen Hydroxylgruppen (Poly(oxyethylen)(Polyethylenglycol)), in denen das Gewicht der vom Ethylenoxid stammenden Monomereinheiten größer ist als das Gewicht der vom Hexamethylendiamin und der Adipinsäure stammenden Monomereinheiten zusammengenommen. Dieses Polymer hat folgende Struktur: Anwendung der Allgemeinen Vorschriften 1 und 6 Mittelwerte: m = 2, n = 13, L = 5. 2. Polyetherpolyol-Copolymer, als klare farblose Flüssigkeit, bestehend aus Oxypropylen- und Oxyethylen-Monomereinheiten in einem Verhältnis von 3:1 und mit einem mittleren Molekulargewicht von etwa 2000. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 1214/91 der Kommission vom 7. Mai 1991 (RV L 1214/91), geändert durch Verordnung (EG) Nr. 936/1999 der Kommission vom 27. April 1999 (ABl. EG Nr. L 117/9), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. L 130) (RV L 441/13): 2. Gesättigter Polyester, als Granulat oder wässrige Dispersion, von der in der Textilindustrie als Schlichtemittel verwendeten Art Unterposition 3907 99 901) Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 6 zu Kapitel 39 sowie nach dem Wortlaut der KN-Codes 3907 und 3907 99 901) (siehe auch die HS-Erläuterungen zu Position 3809, Ausschlussbestimmung g). …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung zur 193. Sitzung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Unterbereich Landwirtschaft/Chemie), 15. bis 16. Oktober 2018: Warenbeschreibung: Polydextrose – Polydextrose ist ein synthetisches, wasserlösliches Polymer, das durch Polykondensation von Glukose, Glucitol (Sorbit) und Zitronensäure hergestellt wird. Polydextrose wird in der Lebensmittelindustrie als Trägerstoff, Füllstoff oder Feuchthaltemittel Lebensmitteln zugesetzt (Zusatzstoff E 1200). Einreihung/Begründung: Polydextrose ist in die KN-Unterposition 3907 10 00 einzureihen, da die Polydextrose-Moleküle als Polyacetale anzusehen sind.
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
- 3907.29.20.35Mixture containing by weight: - 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and - 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)
- 3907.29.20.40Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran (CAS RN 38640-26-5) with a number average molecular weight (Mn) of 900 or more but not more than 3 600
- 3907.29.20.454-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated
- 3907.29.20.50Poly(p-phenylene oxide) in the form of powder - with a glasstransitiontemperature of 210 °C or more, - with a weight average molecular weight (Mw) of 35 000 or ore but not more than 80 000 - with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram
- 3907.29.20.554-Nonylphenol, branched and linear, ethoxylated
- 3907.29.20.63Preparation containing by weight<br> <br>-5 % or more but not more than 15 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) and<br> <br>-85 % or more but not more than 95 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5)<br>
- 3907.29.20.65Preparation containing by weight<br> <br>-40 % or more but not more than 60 % of oxirane, 2-methyl-, polymer with oxirane, ether with 2,2-[[3-methyl-4-[(4-methyl-2-benzothiazolyl)azo]phenyl]imino]bis[ethanol] (2:1) (CAS RN 229306-55-2) and<br> <br>-40 % or more but not more than 60 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)<br>
- 3907.29.20.68Preparation containing by weight<br> <br>-90 % or more but not more than 99 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-(bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3) and<br> <br>-1 % or more but not more than 10 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)<br>
- 3907.29.20.70Preparation containing by weight<br> <br>-50 % or more but not more than 70 % of oxirane, methyl-polymer with oxirane, ether with bis(4-[bis(2-hydroxyethyl)amino)phenyl] (2-sulfophenyl)methyl (4:1), monosodium salt block (CAS RN 126042-89-5) and<br> <br>-30 % or more but not more than 50 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)<br>
- 3907.29.20.73Preparation containing by weight of <br> <br>-23 % or more but not more than 36 % of oxirane, 2-methyl-,polymer with oxirane, ether with bis(4-(bis(2-hydroxyethyl)amino)phenyl)(2-sulfophenyl)methyl (4:1), monosodium salt, block (CAS RN 126042-89-5),<br> <br>-4 % or more but not more than 20 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6),<br> <br>-25 % or more but not more than 30 % of oxirane, 2-methyl-,polymer with oxirane, ether with 2,2'-((3-methyl-4-((4-methyl-2-benzothiazolyl)azo)phenyl)imino)bis(ethanol)(2:1) (CAS RN 229306-55-2),<br> <br>-5 % or more but not more than 10 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5) and<br> <br>-15 % or more but not more than 25 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3)<br>
- 3907.29.20.75Preparation containing by weight<br> <br>-60 % or more but not more than 80 % of Oxirane, 2-methyl-,polymer with oxirane, ether with 2,2',2",2"'-(sulfonylbis(4,1-phenylene)-2,1-diazenediyl(3-methyl-4,1-phenylene)nitrilo))tetrakis(ethanol) (4:1) (CAS RN 927432-39-1) and<br> <br>-20 % or more but not more than 40 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)<br>
- 3907.29.20.90Other
Frequently asked questions
What does customs tariff code 3907.29.20 cover?
Code 3907.29.20 covers Polyetheralkohole, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3907.29.20?
TARIC holds no third-country rate of its own for 3907.29.20. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3907.29.20?
The first six digits form the HS code: 390729. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3907.29.20 have?
3907.29.20 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3907.29.20 sit in the tariff?
3907.29.20 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms > 390729 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3907.29.20?
Yes. The EBTI database holds decisions on 3907.29.20, for example FRBTIFR-BTI-2025-08104. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3907.29.20 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3907.29.20 to 1C111. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3907.29.20 change?
3907.29.20 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.