Customs tariff code 3907.99.80: Other, andere
Reference data as at 1 July 2026
Customs tariff code 3907.99.80 covers Other, andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3907.99.80 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3907.99.80
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3907.99.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Angaben des Antragstellers: Austernweißes oder hellgelbes Granulat aus Polybutylensuccinat Feststellungen an einem Warenmuster: Hartes, weißes Granulat mit einem Schmelzpunkt von 117 °C. Befund: Anderer Polyester, in Primärformen
Angaben des Antragstellers: Austernweißes oder hellgelbes Granulat aus Polybutylenterephthalat-co-butylensebacat. Feststellungen an einem Warenmuster: Hartes, weißes Granulat mit einem Schmelzpunkt von 114 °C. Befund: Anderer Polyester, in Primärformen
Angaben des Antragstellers: Granulat bestehend aus TPEE, EVM, Flammschutzmittel (Magnesiumhydroxid), Stabilisatoren und Verarbeitungshilfsmitteln. Feststellungen an einem Warenmuster: Es wurde ein weißes Granulat aus Kunststoffen (vorrangig Polyestern) vorgelegt. Befund: Anderer gesättigter Polyester in Primärform.
Poliol poliestrowy z dodatkiem środka uniepalniającego (komponent A), w postaci cieczy barwy ciemnej. Produkt przeznaczony do mieszania ze składnikiem izocyjanianowym (komponentem B), dzięki czemu otrzymuje się dwuskładnikową żywicę iniekcyjną stosowaną w górnictwie do wzmacniania i uszczelniania kruchych i słabych mas skalnych i warstw węgla, które mogą mieć różną zawartość wilgoci. Stosowana jest również do uszczelniania wycieków wody i gazu. Produkt pakowany do metalowych beczek o pojemności 18 dm3.
Angaben des Antragstellers: TPE SEBS Compound Vertrauliche Angaben zur Zusammensetzung liegen vor. Feststellungen an einem Warenmuster: Schwarzes, kleinkörniges Granulat aus einem Polymergemisch mit Additiven. Im Gemisch überwiegt ein gesättigter Polyester vom Typ TPC. Befund: Anderer, gesättigter Polyester in Primärform.
Angaben des Antragstellers: Thermoplastisches Polyesterharz Lieferform: Zugeschnittene Kügelchen (Pellets) Primärform zur möglichen Weiterverarbeitung im Spritzgussverfahren. Das schwarze Kunststoffgranulat besteht aus Polybutylenterephthalat mit 30 % Glasfaserverstärkung. Geringfügige Beimischung von Schmierstoff um eine Verklebung im Extruder zu vermeiden. Feststellungen an einem Warenmuster: Grau-schwarzes, hartes Granulat Befund: Es handelt sich um einen anderen gesättigten Polyester (hier Polybutylenterphthalat).
Aromatyczny poliol poliestrowy w postaci cieczy, bezbarwnej do barwy słomkowej, będący mieszaniną na bazie polimeru poliestrowego (główny składnik) z udziałem dodatków pomocniczych i zanieczyszczeń. Produkt przeznaczony do produkcji pian PUR/PIR. Główny składnik Poliol poliestrowy powstaje w wyniku reakcji poliestryfikacji, w wyniku której powstają wiązania nasycone. Produkt sprzedawany jest w cysternach kolejowych, autocysternach lub innych opakowaniach jednostkowych (DPPL, beczka, kanister).
Produkt w postaci cieczy, bezbarwnej do barwy żółtej, wolnej od zanieczyszczeń mechanicznych, mogącej opalizować. Mieszanina polioli poliestrowych i polieterowych, z przewagą polioli poliestrowych, oba składniki są mieszane w odpowiednich proporcjach oraz dodawane są dodatki. Produkt przeznaczony do produkcji viscoelastycznych pianek poliuretanowych. Główny składnik poliol poliestrowy powstaje w wyniku reakcji poliestryfikacji, w wyniku której powstają wiązania nasycone. Produkt sprzedawany jest w cysternach kolejowych, autocysternach lub innych opakowaniach jednostkowych (DPPL, beczka, kanister).
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören 1) Polyacetale. Dies sind Polymere, die von einem Aldehyd, normalerweise Formaldehyd, erhalten werden und durch Acetalfunktionen in der Polymerkette charakterisiert sind. Sie sind nicht mit den Polyvinylacetalen der Pos. 3905 zu verwechseln, in denen die Acetalfunktionen Substituenten an der Polymerkette sind. Diese Reihe von Kunststoffen umfasst Acetal-Copolymere, die als Kunststoffe für den technischen Bereich zum Herstellen von Kugellagerkäfigen, Nocken, Gehäusen für Kraftfahrzeuginstrumente, Türgriffen, Schaufelrädern für Pumpen und Ventilatorflügeln, Schuhabsätzen, mechanischen Spielzeugen, Fittings für Rohrleitungen usw. verwendet werden. 2) Andere Polyether. Dies sind Polymere, die aus Epoxiden, Glykolen oder ähnlichen Stoffen hergestellt wurden und sich durch Etherfunktionen in der Polymerkette kennzeichnen. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 1214/91 der Kommission vom 7. Mai 1991 (RV L 1214/91), geändert durch Verordnung (EG) Nr. 936/1999 der Kommission vom 27. April 1999 (ABl. EG Nr. L 117/9), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. L 130) (RV L 441/13): 2. Gesättigter Polyester, als Granulat oder wässrige Dispersion, von der in der Textilindustrie als Schlichtemittel verwendeten Art Unterposition 3907 99 901) Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 6 zu Kapitel 39 sowie nach dem Wortlaut der KN-Codes 3907 und 3907 99 901) (siehe auch die HS-Erläuterungen zu Position 3809, Ausschlussbestimmung g). …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung zur 193. Sitzung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Unterbereich Landwirtschaft/Chemie), 15. bis 16. Oktober 2018: Warenbeschreibung: Polydextrose – Polydextrose ist ein synthetisches, wasserlösliches Polymer, das durch Polykondensation von Glukose, Glucitol (Sorbit) und Zitronensäure hergestellt wird. Polydextrose wird in der Lebensmittelindustrie als Trägerstoff, Füllstoff oder Feuchthaltemittel Lebensmitteln zugesetzt (Zusatzstoff E 1200). Einreihung/Begründung: Polydextrose ist in die KN-Unterposition 3907 10 00 einzureihen, da die Polydextrose-Moleküle als Polyacetale anzusehen sind.
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
- 3907.99.80.25Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol
- 3907.99.80.30Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
- 3907.99.80.35Copolymer in form of a clear, pale yellow liquid, consisting of - phthalic acid isomers and/or aliphatic dicarboxylic acids, - aliphatic diols, and - fatty acid end-caps with: - a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH, - a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, and - an acid value less than 10 mg KOH/g
- 3907.99.80.50Aliphatic-aromatic copolyesters, namely polybutylene adipate-co-terephthalate (PBAT) and polybutylene sebacate-co-terephthalate (PBSeT), synthesised from petrochemical or biological feedstock, in their pure form or contained in compounds containing no less than 50 % of PBAT or PBSeT polymer by weight
- 3907.99.80.70Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol
- 3907.99.80.80Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
- 3907.99.80.90Other
Frequently asked questions
What does customs tariff code 3907.99.80 cover?
Code 3907.99.80 covers Other, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3907.99.80?
TARIC holds no third-country rate of its own for 3907.99.80. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3907.99.80?
The first six digits form the HS code: 390799. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3907.99.80 have?
3907.99.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3907.99.80 sit in the tariff?
3907.99.80 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms > 390799 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3907.99.80?
Yes. The EBTI database holds decisions on 3907.99.80, for example DEBTI3512/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3907.99.80 change?
3907.99.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.