Customs tariff code 3910.00.00.90: Other
Reference data as at 1 July 2026
Customs tariff code 3910.00.00.90 covers Other. The third-country duty rate is 6.5 %, plus import VAT.
3910.00.00.90 is TARIC code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3910.00.00.90
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3910Silicones in primary forms
- 3910.00.00I. PRIMÄRFORMEN, Silicone in Primärformen
- 3910.00.00.90Other
From HS code to customs tariff code 3910.00.00.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C006Fluids and lubricating materials, as follows:
- 1C006Fluids and lubricating materials, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Silikonska tekućina koja se koristi za sprječavanje nastanka pjene i kao aditiv. Sastav prema proizvođaču: linearni polimer polidimetilsiloksan (CAS:63148-62-9) Pakiranje: plastični spremnik od 19 L (18,14 kg).
This product is a chemical Full chemical name: Monomethacryloxypropyl terminated poly(2-dimethylsilylethyl)siloxane Cas No: 1222098-33-0 Used in the manufacture of contact lenses The product is a silicone oil The physical state of the product is a clear liquid Container Net Weight: 10kg
The product is a chemical. BIS(3-METHACRYLAMIDOPROPYL)POLYDIMETHYLSILOXANE (Ma2d37) CAS Number: 1222098-32-9 This product is used in the manufacture of contact lens. It is presented as a clear liquid packaged in a white plastic bucket. The container weight is 10kg.
Oldószermentes, szilikonalapú, színezéket tartalmazó ragasztó készítmény, 20 literes kiszerelésben.
Angaben des Antragstellers: Bei der Ware handelt es sich um ein Silikonöl bestehend aus "Dimethylsilioxane" (CAS Nr.: 63148-62-9, ENCS Nr.: (7)-476, ISHL. Nr.: (7)-476, Konzentration: 100), das in einem Fläschen mit 10 mL vertrieben wird und zum Einreiben/Auftragen auf O-Ringe, Absaugventile sowie Gummidichtungen von med. Endoskopen verwendet wird. Ein Warenmuster wurde nicht vorgelegt. Nach dem Sicherheitsdatenblatt handelt es sich um reines (100 %) Polydimethylsiloxan (CAS Nr.: 63148-62-9). Befund: Es handelt sich um ein anderes Silicon in Primärform.
Dimethicone CAS # 9006-65-9 This a primary silicone product which is used as a excipient in R&D project Assay: 97.0-103.0% Viscosity: 332.5-367.5 mm2/s Loss on heating: 0.3% max Appearance: Clear Colourless liquid Polydimethylsiloxane 98.0% Impurity 2%
Andere Silicone in Primärform Form eines weissen Granulats; kein Erzeugnis der Position TARIC 3910 00 00 50; das Erzeugnis ist – lt. Angaben der Antragstellerin – ein Verarbeitungshilfsmittel für thermoplastische Werkstoffe, Kratzschutz für Polypropylen; aufgemacht in PE-Beutel zu 25 kg.
Angaben des Antragstellers: Feinmechaniköl für Messflügel im 5 L-Kanister. Nach dem Datenblatt handelt es sich um ein reines (> 98 %) polymeres Siliconöl (CAS 9006-65-9). Befund: Es handelt sich um ein anderes Silicon in Primärform.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Silicone dieser Position sind chemisch nicht einheitliche Erzeugnisse, die in ihrem Molekül mehr als eine Silicium-Sauerstoff-Silicium-Bindung und organische Gruppen enthalten, die durch unmittelbare Silicium-Kohlenstoff-Bindungen an die Siliciumatome gebunden sind. Silicone sind sehr beständig und können entweder flüssig, halbflüssig, pastös oder fest sein. Zu ihnen gehören Siliconöle, Siliconfette, Siliconharze und Siliconelostomere. 1) Siliconöle und -fette werden verwendet als temperaturbeständige Schmiermittel, als wasserabweisende Imprägnierungsmittel, als Dielektrika, als Schauminhibitoren, als Entformungsmittel usw. Zubereitete Schmiermittel, die Siliconfette und -öle gemischt mit anderen Stoffen enthalten, gehören je nach ihrer Beschaffenheit zu Pos. 2710 oder 3403 (s. die entsprechenden Erläuterungen). …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3910.00.00.90 cover?
Code 3910.00.00.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3910.00.00.90?
The third-country duty rate for 3910.00.00.90 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3910.00.00.90?
The first six digits form the HS code: 391000. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3910.00.00.90 have?
3910.00.00.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 3910.00.00.90 sit in the tariff?
3910.00.00.90 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3910 Silicones in primary forms > 39100000 I. PRIMÄRFORMEN, Silicone in Primärformen. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3910.00.00.90?
Yes. The EBTI database holds decisions on 3910.00.00.90, for example HRBTIOM-2025-0051. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3910.00.00.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3910.00.00.90 to 1C006, 1C006. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3910.00.00.90 change?
3910.00.00.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.