Customs tariff code 3915.10.20: Having a specific gravity of 0,94 or more (for example, PE-HD)
Reference data as at 1 July 2026
Customs tariff code 3915.10.20 covers Having a specific gravity of 0,94 or more (for example, PE-HD). The third-country duty rate is 6.5 %, plus import VAT.
3915.10.20 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3915.10.20
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 2
Where this code sits in the tariff
From HS code to customs tariff code 3915.10.20
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Dle deklarovaných údajů se jedná o role plastových fólií s kvalitativními vadami. Fólie jsou defektní a nepoužitelné pro svůj původní účel, tj. pro výrobu laminovaných skel. Fólie jsou vysoké chemické čistoty (minimálně 99 %) a nejsou kontaminovány jinými materiály. Po recyklaci slouží jako surovina pro výrobu nových výrobků. Materiál fólií je ionomerní pryskyřice sestávající se ze soli kopolymeru ethylenu (o relativní hustotě vyšší než 0,94) s kyselinou methakrylovou. Šíře rolí je cca 2 metry. Tloušťka fólií se liší a převyšuje vždy 0,125 mm.
Dle deklarovaných údajů se jedná o technologické odřezky plastových fólií různých nepravidelných tvarů (jiné než pravoúhlé) a různých velikostí. Odřezky pochází ze skláren jako odpad vznikající při výrobě laminovaných skel pro stavební průmysl. Odřezky jsou po recyklaci vstupní surovinou pro výrobu nových výrobků. Materiál fólií je ionomerní pryskyřice sestávající se ze soli kopolymeru ethylenu (o relativní hustotě vyšší než 0,94) s kyselinou methakrylovou. Fólie jsou vysoké chemické čistoty (minimálně 99 %) a nejsou kontaminovány jinými materiály. Tloušťky odřezků jsou různé, ale vždy větší než 0,125 mm.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Der Begriff „Kunststoff“ ist in Anmerkung 1 zu Kapitel 39 festgelegt. Hierher gehören auch: 1. Abfälle, Schnitzel und Bruch eines einzelnen wärmehärtbaren, bereits ausgehärteten Kunststoffs, in Primärformen umgewandelt; 2. Abfälle, Schnitzel und Bruch von Kunststoffgemischen (thermoplastische Stoffe, wärmehärtbare, bereits ausgehärtete Stoffe oder thermoplastische und wärmehärtbare Stoffe), in Primärformen umgewandelt. (entfallen) bis
Erläuterungen zum Harmonisierten System (HS) Die Waren dieser Position können entweder aus zerbrochenen oder gebrauchten Kunststoffwaren, die in diesem Zustand eindeutig für den ursprünglichen Verwendungszweck unbrauchbar sind, bestehen oder es sind Bearbeitungsabfälle (Späne, Schnitzel, Bruch usw.). Gewisse Abfälle können als Formmasse, Lackrohstoffe, Füllstoffe usw. wiederverwendet werden. Nicht zu dieser Position gehören jedoch Abfälle, Schnitzel und Bruch, aus einem einzigen thermoplastischen Stoff, in Primärformen umgewandelt (Pos. 3901 bis 3914). Zu dieser Position gehören Abfälle, Schnitzel und Bruch aus einem einzigen duroplastischen Stoff oder aus Mischungen von zwei oder mehr thermoplastischen Stoffen, auch wenn sie in Primärformen umgewandelt worden sind. …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3915.10.20 cover?
Code 3915.10.20 covers Having a specific gravity of 0,94 or more (for example, PE-HD). Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3915.10.20?
The third-country duty rate for 3915.10.20 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3915.10.20?
The first six digits form the HS code: 391510. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3915.10.20 have?
3915.10.20 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3915.10.20 sit in the tariff?
3915.10.20 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3915 Waste, parings and scrap, of plastics > 391510 Of polymers of ethylene. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3915.10.20?
Yes. The EBTI database holds decisions on 3915.10.20, for example CZBTI41/024721/2024-580000-04/01. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3915.10.20 change?
3915.10.20 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.