Customs tariff code 3916.90.10: Of other plastics, aus Kondensationspolymerisations- und…
Reference data as at 1 July 2026
Customs tariff code 3916.90.10 covers Of other plastics, aus Kondensationspolymerisations- und Umlagerungspolymerisationserzeugnissen, auch chemisch modifiziert. The third-country duty rate is 6.5 %, plus import VAT.
3916.90.10 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3916.90.10
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3916Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
- 3916.90Of other plastics
- 3916.90.10Of other plastics, aus Kondensationspolymerisations- und Umlagerungspolymerisationserzeugnissen, auch chemisch modifiziert
From HS code to customs tariff code 3916.90.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 9C110Resin impregnated fibre prepregs and metal coated fibre preforms therefor, for composite structures, laminates and manufactures specified in 9A110, made either with organic matrix or metal matrix utilising fibrous or filamentary reinforcements having a "specific tensile strength" greater than 7,62 × 10 4 m and a "specific modulus" greater than 3,18 × 10 6 m.
- 1C010"Fibrous or filamentary materials", as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Profilé en matière plastique (silicone) de forme géométrique autre qu'un polygone régulier, présentant d'une extrémité à l'autre une section transversale constante. L’article est fabriqué par extrusion. Il est destiné à être découpé en tronçons avec des encoches ou trous pour servir de support servant à maintenir des instruments chirurgicaux dans une boite de stérilisation.
Het betreft decoratieve voorwerpen in profielvorm, bedoeld voor gebruik als decoratieve (plafond)kroonlijsten in gebouwen. De goederen bestaan uit kunststof (polyurethaan met gemiddelde dichtheid, al dan niet flexibel) en hebben een constante of herhalende dwarsdoorsnede in de lengterichting. De goederen worden vervaardigd door middel van spuitgieten van polyurethaan. Het productieproces is zo ontwikkeld dat er geen verdere bewerking meer is vereist. Deze producten worden typisch gemonteerd met behulp van montagelijm, siliconekit of dergelijke.
Dle deklarovaných údajů se jedná o ohebný plastový profil, který slouží jako "stěrka" ke stírání oleje a jiných nečistot ve válcovnách plechů. Rozměry (mm): 23 x 14,5. Dodáváno v různých délkách od 0,4 m do 2,5 m. Materiál: termoplastický polyuretan (Elastollan) s tvrdostí 60 ShA nebo 80 ShA.
Angaben des Antragstellers: Gefäßschlingen aus gewebeneutralem Silikon in verschiedenen Abmessungen und Farben. Ein Warenmuster wurde nicht vorgelegt. Die Ware wurde durch ein Produktdatenblatt mit Abbildung beschrieben und stellt sich als Profil mit ovalem Querschnitt dar. Befund: Profil aus Kunststoff, aus Kondensationspolymerisationserzeugnissen.
Hörnskydd i form av en profilerad plaststräng. Skyddet är vinkelformat och profilerat utmed hela sin längd samt har enligt uppgift en längd av 2644 mm. Hörnskyddet ska monteras utmed takets långsidor på utsidan av en flygfraktscontainer för temperaturkänsligt gods för att skydda mot skador vid yttre påverkan. Hörnskyddet består enligt uppgift av silikon (plast).
Angaben: Es handelt sich um das Oberprofil (dem eigentlichen Handlauf) eines aus zwei Profilkomponenten bestehenden Handlaufs. Der zusammengesetzte Handlauf verfügt über bis zu drei integrierte LED-Bänder zur Orientierung im Tunnel in Notsituationen. Das Oberprofil liegt ohne eingesetztes LED-Band vor und besteht aus glasfaserverstärktem PBT und ist lediglich auf eine bestimmte Länge zugeschnitten, ansonsten jedoch nicht weiter bearbeitet. Laut technischer Zeichnung ist das Profil annähernd P-förmig. Befund: Profile, auch mit Oberflächenbearbeitung, jedoch nicht weiter bearbeitet, aus Kunststoffen, aus anderen Kunststoffen, aus Kondensationspolymerisations- und Umlagerungspolymerisationserzeugnissen, auch chemisch modifiziert
Kunststoffprofile, auch mit Oberflächenbehandlung, jedoch nicht weiter bearbeitet, in Form von passgenau gefertigten Profilen mit einem über die gesamte Länge gleichbleibendem Querschnitt; im Wesentlichen aus (lt. Angaben der Antragstellerin) Glasfaser verstärktem Kunststoff bestehend, welche als Halteleisten für Dichtleisten und Formatbegrenzerleisten in Saugwalzen in Maschinen in der Papiererzeugung bzw. Papierveredelung verwendet werden. Die Profile können in verschiedenen Längen und Querschnitten vorliegen. (Angaben laut Antragsteller) (Abbildung siehe Anlage)
Angaben des Antragstellers: Bei der Ware handelt es sich um ein schwarzes Filament aus thermoplastischem Hochleistungs-Polyesterelastomer (TPE) mit einer Filamentdicke von 2,85 mm (Filamentlänge: 71 m). Die Ware ist auf einer Spule aufgerollt und wird als Filament in einem 3D-Drucker verwendet. Ein Warenmuster wurde nicht vorgelegt. Befund: Es liegt ein Monofil aus einem Kondensationspolymerisationserzeugnis mit einem größten Durchmesser von mehr als 1 mm vor.
Notes that govern this classification
Zu Unterpositionen 3916 90 10: Hierher gehören z. B. Monofile, Stäbe, Stangen und Profile aus Polyestern, Polyamiden oder Polyurethanen.
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören nur Monofile mit einem größten Durchmesser von mehr als 1 mm, Stäbe, Stangen und Profile. Diese in großen Längen und einem Arbeitsgang (im Allgemeinen Extrusion) hergestellten Erzeugnisse weisen eine durchgehende oder sich wiederholende Querschnittsform auf. Hohlprofile weisen eine von Rohren und Schläuchen der Pos. 3917 abweichende Querschnittsform auf (s. a. Anmerkung 8 zu diesem Kapitel). Zu dieser Position gehören auch Waren, die lediglich auf eine, den größten Querschnitt der Ware übersteigende Länge zugeschnitten oder oberflächenbearbeitet (poliert, mattiert, usw.), jedoch nicht weiter bearbeitet sind. Profile mit einer selbstklebenden Seite, die zum Abdichten von Fensterfalzen dienen, gehören zu dieser Position. …
Zu Unterposition 3916 90: 1. Nachfüll-Monofil aus ABS (Acrylnitril-Butadien-Styrol), hergestellt für additive Fertigungsmaschinen (3D-Drucker). Die Ware besteht aus zwei Einzelteilen, einer mit thermoplastischen Monofil gefüllten Spule und einem Chip und wird mit einem Trockenmittelbeutel zum Aufnehmen von Feuchtigkeit und einer Bedienungsanleitung gestellt. Die Nachfüllung enthält 600 g Monofile. Das Monofil hat einen Durchmesser von 1,75 mm, ist in vielen Farben erhältlich und wird in einem Karton gestellt. Sie ist für die Monofil-Kartusche konzipiert, die mit bestimmten 3D-Druckern kompatibel ist. Anwendung der Allgemeinen Vorschriften 1, 3 b) und 6.
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3916.90.10 cover?
Code 3916.90.10 covers Of other plastics, aus Kondensationspolymerisations- und Umlagerungspolymerisationserzeugnissen, auch chemisch modifiziert. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3916.90.10?
The third-country duty rate for 3916.90.10 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3916.90.10?
The first six digits form the HS code: 391690. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3916.90.10 have?
3916.90.10 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3916.90.10 sit in the tariff?
3916.90.10 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3916 Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics > 391690 Of other plastics. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3916.90.10?
Yes. The EBTI database holds decisions on 3916.90.10, for example FRBTIFR-BTI-2025-07130. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3916.90.10 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3916.90.10 to 9C110, 1C010. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3916.90.10 change?
3916.90.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.