Customs tariff code 3917: II. ABFÄLLE, SCHNITZEL UND BRUCH; HALBERZEUGNISSE; FERTIGERZEUGNISSE, Rohre und…
Reference data as at 1 July 2026
Customs tariff code 3917 covers II. ABFÄLLE, SCHNITZEL UND BRUCH; HALBERZEUGNISSE; FERTIGERZEUGNISSE, Rohre und Schläuche sowie Formstücke, Verschlussstücke und Verbindungsstücke (Kniestücke, Flansche und dergleichen), aus Kunststoffen. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3917 is heading in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3917
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 1
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3917II. ABFÄLLE, SCHNITZEL UND BRUCH; HALBERZEUGNISSE; FERTIGERZEUGNISSE, Rohre und Schläuche sowie Formstücke, Verschlussstücke und Verbindungsstücke (Kniestücke, Flansche und dergleichen), aus Kunststoffen
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
RACCORD DE ROBINET EN MATIÈRE PLASTIQUE, DÉNOMMÉ "RACCORD NEZ DE ROBINET". CET ACCESSOIRE, QUI RELIE UN TUYAU A UN ROBINET, EST MUNI D'UN RÉDUCTEUR ET D'UN JOINT.
Notes that govern this classification
Zu Unterposition 3917 29 00: Hierher gehören Rohre und Schläuche aus Kondensationspolymerisations- und Umlagerungspolymerisationserzeugnissen, auch chemisch modifiziert, z. B. aus Phenoplasten, Aminoplasten, Alkyden und anderen Polyestern, aus Polyamiden, Polyurethanen und insbesondere aus Siliconen. Hierher gehören Waren aus Additionspolymerisationserzeugnissen, z. B. aus Polytetrahaloethylenen, Polyisobutylen, Polymeren des Styrols, des Vinylidenchlorids, des Vinylacetats oder anderer Vinylester sowie aus Acrylpolymeren. (entfallen) bis
Erläuterungen zum Harmonisierten System (HS) Im Sinne der Anmerkung 8 zu diesem Kapitel gelten als Rohre und Schläuche: a) Hohle Erzeugnisse, sowohl Halb- als auch Fertigerzeugnisse, die im allgemeinen zum Zuführen, Durchleiten oder Verteilen von Gasen oder Flüssigkeiten verwendet werden, sofern sie einen inneren Querschnitt haben, der rund, oval, rechteckig (wobei die Länge der einen Seite das 1,5-fache der anderen Seite nicht übersteigt) oder ein regelmäßiges Vieleck ist; und b) Wursthüllen (auch abgebunden oder anderweitig bearbeitet) und andere flachliegende Schläuche. Zu dieser Position gehören ebenfalls Fittings aus Kunststoffen für Rohre und Schläuche (z. B. Kniestücke, Flansche, Verbindungsstücke). Rohre und Schläuche sowie Fittings dafür können biegsam oder hart, verstärkt oder mit anderen Stoffen verbunden sein. (Bezüglich der Einreihung von Rohren und Schläuchen usw. …
Zu Unterposition 3917 10: 1. Essbare Kollagenhüllen für Wurstwaren. Flexible schlauchförmige Hüllen, die durch Extrudieren von Kollagen aus Häuten von Schweinen, Rindern oder anderen Tieren durch einen Auslassschlitz mit geschlossener geometrischer Form (gebogen, oval oder ringförmig) gewonnen und durch chemische oder physikalische Prozesse gehärtet werden. Das Erzeugnis wird in gewellten Schläuchen von unterschiedlicher Länge angeboten. Anwendung der Allgemeinen Vorschriften 1 (Anmerkung 8 zu Kapitel 39) und 6. Zu der Unterposition 3917 21: 1. Perforierter Kunststoffschlauch (Polyethylen) mit einem runden Querschnitt sowie Löchern in bestimmten Intervallen, ausgestattet mit integrierten Kunstofftropfern. Die Tropfer haben einen speziellen Aufbau zum Druckausgleich. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 738/2000 der Kommission vom 7. April 2000 (ABl. EG Nr. L 87/10) (RV L 738/00), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1): 1. Flexibles Erzeugnis für die temperaturgesteuerte Verteilung von Gasen oder Flüssigkeiten. Es ist von innen nach außen wie folgt aufgebaut: - ein einzelner flexibler Kunststoffschlauch für den Materialtransport, der einem Druck von 27,6 Mpa oder mehr standhält; - ein elektrisches Heizband, das durch eine Aluminiumplatte vom Transportschlauch getrennt ist; - eine Lage aus Aluminiumfolie, die den Transportschlauch, das Heizband und die Aluminiumplatte umgibt; - ein isoliertes elektrisches Kabel für die Steuerung des Heizbandes; - eine Lage aus Vliesstoff; - eine äußere Hülle aus flexiblem synthetischem Material. …
Subdivisions of this code
- 3917.10Artificial guts (sausage casings) of hardened protein or of cellulosic materials
- 3917.21Of polymers of ethylene
- 3917.22Of polymers of propylene
- 3917.23Of polymers of vinyl chloride
- 3917.29Of other plastics
- 3917.31Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa
- 3917.32Other, not reinforced or otherwise combined with other materials, without fittings
- 3917.33Other, not reinforced or otherwise combined with other materials, with fittings
- 3917.39Other
- 3917.40Fittings
Frequently asked questions
What does customs tariff code 3917 cover?
Code 3917 covers II. ABFÄLLE, SCHNITZEL UND BRUCH; HALBERZEUGNISSE; FERTIGERZEUGNISSE, Rohre und Schläuche sowie Formstücke, Verschlussstücke und Verbindungsstücke (Kniestücke, Flansche und dergleichen), aus Kunststoffen. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3917?
TARIC holds no third-country rate of its own for 3917. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3917?
The first six digits form the HS code: 3917. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3917 have?
3917 has four digits and identifies a Harmonised System heading. A German import declaration requires the eleven-digit commodity code.
Where does 3917 sit in the tariff?
3917 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3917?
Yes. The EBTI database holds decisions on 3917, for example FR-PRO-2009-002539. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3917 change?
3917 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.