Customs tariff code 3920.99.28.65.0: Matte thermoplastische Polyurethanfolie, in Rollen, mit :, einer Breite von 1640 mm (±…
Reference data as at 1 July 2026
Customs tariff code 3920.99.28.65.0 covers Matte thermoplastische Polyurethanfolie, in Rollen, mit :, einer Breite von 1640 mm (± 10 mm),, einem Glanz von 3,3° oder mehr, jedoch nicht mehr als 3,8° (nach ASTM D2457),, einer Oberflächenrauheit von 1,9 Ra oder mehr, jedoch nicht mehr als 2,8 Ra (nach ISO 4287),, einer Dicke von mehr als 365 µm, jedoch nicht mehr als 760 µm, einer Härte von 90 (± 4) (nach dem Shore-A-Verfahren (ASTM D2240)),, einer Bruchreißdehnung von 470 % (nach EN ISO 527). The third-country duty rate is 6.5 %, plus import VAT.
3920.99.28.65.0 is national commodity code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 3920.99.28.65.0
- Third-country duty
- 6.5 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3920Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
- 3920.99Of other plastics
- 3920.99.28Other
- 3920.99.28.65Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (± 10 mm), - a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), - a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), - a thickness of more than 365 µm but not more than 760 µm, - a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), - an elongation to break of 470 % (as determined by the method: EN ISO 527)
- 3920.99.28.65.0Matte thermoplastische Polyurethanfolie, in Rollen, mit :, einer Breite von 1640 mm (± 10 mm),, einem Glanz von 3,3° oder mehr, jedoch nicht mehr als 3,8° (nach ASTM D2457),, einer Oberflächenrauheit von 1,9 Ra oder mehr, jedoch nicht mehr als 2,8 Ra (nach ISO 4287),, einer Dicke von mehr als 365 µm, jedoch nicht mehr als 760 µm, einer Härte von 90 (± 4) (nach dem Shore-A-Verfahren (ASTM D2240)),, einer Bruchreißdehnung von 470 % (nach EN ISO 527)
From HS code to customs tariff code 3920.99.28.65.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A003aManufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
- 1A003Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterposition 3920 99: 1. Rechteckige, in einer Pressform hergestellte Platten aus gehärtetem Casein, deren Ränder lediglich leicht abgeschrägt sind, um das Herausnehmen aus der Form zu erleichtern, mit dem offensichtlichen Charakter von Halberzeugnissen, die zu anderen Erzeugnissen verarbeitet werden sollen (z. B. zu Knopf-Rohlingen durch Ausschneiden oder Ausstanzen).
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgericht Hamburg vom 5. Juni 2002 Az.: IV 24/00 Aus den Gründen: ... Im Februar und März ... führte die Klägerin aus China Rettungsdecken aus Kunststoff ein. Diese Rettungsdecken sind zum Einsatz bei der Erste-Hilfe-Versorgung von Unfallopfern bestimmt, die in die Decken eingewickelt werden, damit der Körper nicht auskühlt. Es handelt sich um 0,2 mm dicke Folien in unterschiedlichen Größen (160 x 220 cm, 160 x 225 cm und 140 x 220 cm) bestehend aus Polyethylenterephtalat, die entweder beidseitig mit einer silbrigen Aluminiumschicht oder einseitig mit dieser Aluminiumschicht und auf der anderen Seite mit einer goldenen Lackschicht überzogen sind und die zusammengefaltet zu Paketen von ca. 14 cm Breite und 8,5 cm Länge gefaltet und in kleinen Plastiktüten verpackt geliefert werden. ... …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Frequently asked questions
What does customs tariff code 3920.99.28.65.0 cover?
Code 3920.99.28.65.0 covers Matte thermoplastische Polyurethanfolie, in Rollen, mit :, einer Breite von 1640 mm (± 10 mm),, einem Glanz von 3,3° oder mehr, jedoch nicht mehr als 3,8° (nach ASTM D2457),, einer Oberflächenrauheit von 1,9 Ra oder mehr, jedoch nicht mehr als 2,8 Ra (nach ISO 4287),, einer Dicke von mehr als 365 µm, jedoch nicht mehr als 760 µm, einer Härte von 90 (± 4) (nach dem Shore-A-Verfahren (ASTM D2240)),, einer Bruchreißdehnung von 470 % (nach EN ISO 527). Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3920.99.28.65.0?
The third-country duty rate for 3920.99.28.65.0 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3920.99.28.65.0?
The first six digits form the HS code: 392099. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3920.99.28.65.0 have?
3920.99.28.65.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 3920.99.28.65.0 sit in the tariff?
3920.99.28.65.0 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials > 392099 Of other plastics > 39209928 Other > 3920992865 Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (± 10 mm), - a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), - a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), - a thickness of more than 365 µm but not more than 760 µm, - a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), - an elongation to break of 470 % (as determined by the method: EN ISO 527). The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3920.99.28.65.0?
The EBTI database currently holds no valid decisions on 3920.99.28.65.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3920.99.28.65.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3920.99.28.65.0 to 1A003a, 1A003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3920.99.28.65.0 change?
3920.99.28.65.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.