Customs tariff code 3920.99.59: Of other plastics, aus Additionspolymerisationserzeugnissen, andere
Reference data as at 1 July 2026
Customs tariff code 3920.99.59 covers Of other plastics, aus Additionspolymerisationserzeugnissen, andere. The third-country duty rate is 6.5 %, plus import VAT.
3920.99.59 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3920.99.59
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3920.99.59
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C010"Fibrous or filamentary materials", as follows:
- 1C101Materials and devices for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures, other than those specified in 1C001, usable in 'missiles', "missile" subsystems or unmanned aerial vehicles specified in 9A012 or 9A112.a.
- 9C110Resin impregnated fibre prepregs and metal coated fibre preforms therefor, for composite structures, laminates and manufactures specified in 9A110, made either with organic matrix or metal matrix utilising fibrous or filamentary reinforcements having a "specific tensile strength" greater than 7,62 × 10 4 m and a "specific modulus" greater than 3,18 × 10 6 m.
- 1A003Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Dle poskytnutých údajů se jedná o pružné desky vyrobené ze fluoroelastomerové (FKM) pryže. Desky černé barvy jsou pravoúhlého tvaru o rozměrech 1,2 m x 5 m nebo 10 m a tloušťce v rozmezí od 1 do 15 mm. Desky nejsou nijak povrchově upravovány a jsou svinuty do rolí. Používají se k výrobě těsnění pro nejnáročnější aplikace v automobilovém průmyslu (těsnění motorů), chemickém průmyslu, petrochemii a letecké technice.
Tovarom je nesterilný obväz elastický škrtiaci z neľahčeného TPE, ktorý sa používa na dočasné zastavenie masívneho krvácania z rany. Tovar je vyrobený z neľahčeného TPE (termoplastický elastomér), obsahuje plastové polymérové komponenty, hlavnou zložkou je styrénový blokový kopolymér (TPS/SEBS/SBS). Tovar neprechádza vulkanizáciou sírou ani žiadnymi chemickými procesmi zosieťovania a nie je zosilnený, nie je laminovaný, neobsahuj textil, kov alebo kompozitné materiály. Tovar je strihaný do požadovaných rozmerov, roluje a balí sa do vrecka. Tovar má tvar pásu pravidelného tvaru a rozmer 60 x 700 x 0,6 mm (š x d x h).
Tovarom je nesterilný obväz elastický škrtiaci z neľahčeného TPE, ktorý sa používa na dočasné zastavenie masívneho krvácania z rany. Tovar je vyrobený z neľahčeného TPE (termoplastický elastomér), obsahuje plastové polymérové komponenty, hlavnou zložkou je styrénový blokový kopolymér (TPS/SEBS/SBS). Tovar neprechádza vulkanizáciou sírou ani žiadnymi chemickými procesmi zosieťovania a nie je zosilnený, nie je laminovaný, neobsahuj textil, kov alebo kompozitné materiály. Tovar je strihaný do požadovaných rozmerov, roluje a balí sa do vrecka. Tovar má tvar pásu pravidelného tvaru a rozmer 40 x 700 x 0,6 mm (š x d x h).
Tovarom je nesterilný obväz elastický škrtiaci z neľahčeného TPE, ktorý sa používa na dočasné zastavenie masívneho krvácania z rany. Tovar je vyrobený z neľahčeného TPE (termoplastický elastomér), obsahuje plastové polymérové komponenty, hlavnou zložkou je styrénový blokový kopolymér (TPS/SEBS/SBS). Tovar neprechádza vulkanizáciou sírou ani žiadnymi chemickými procesmi zosieťovania a nie je zosilnený, nie je laminovaný, neobsahuj textil, kov alebo kompozitné materiály. Tovar je strihaný do požadovaných rozmerov, roluje a balí sa do vrecka. Tovar má tvar pásu pravidelného tvaru a rozmer 60 x 1250 x 0,6 mm (š x d x h).
Angaben des Antragstellers: Führungsband Verwendung: Führung und Lagerung eines Kolbens in einem hydraulischen Zylinder einer Hebebühne. Das Führungsband verhindert einen direkten Metallkontakt und nimmt die Querkräfte auf und reduziert den Verschleiß. Das Führungsband besteht aus PTFE + 60 % Bronze. Nach einer Abbildung und technischen Datenblättern handelt es sich um ein aufgerolltes Band mit einer Breite von ca. 34,8 mm. Das Band ist 2,5 mm dick und 41 m lang. In der Masse aus Kunststoff sind Bronzepartikel eingearbeitet. Charakterbestimmend für das Band ist der Kunststoff (hier Polytetrafluorethylen). Befund: Es handelt sich um ein Band aus Kunststoff, hier Polytetrafluorethylen, gefüllt mit Bronze.
Fehér színű, nem nyomtatott, egyrétegű, nem perforált, nem porózus, nem öntapadó, rugalmas fólia tekercsben, addíciós polimerizációval készült műanyagból. A termék pelenka elasztikus részeként kerül felhasználásra. Különböző szélességű csíkra vágás után, előírt hosszúságú tekercsbe van felcsévélve.
Een transparante folie vervaardigd van polychlorotrifluoroethyleen (PCTFE) homopolymeer. De folie wordt gebruikt als hoogwaardige barrièrefilm voor de farmaceutische en medische markten. Deze kunststoffolie zonder celstructuur is niet versterkt, gelaagd of op dergelijke wijze gecombineerd met andere stoffen. De dikte van de folie varieert van 15 micron (0,6 mil) tot 152 micron (6 mil) en wordt aangeboden op rollen.
Angaben des Antragstellers: Ionenmembran für Brennstoffzellen oder Elektolysezellen aus einem Fluorpolymer Folienaufbau: Dicke 8 - 50 µm Feststellungen an Warenmustern: Leicht bräunliche, transparente Folie auf einer farblosen Schutzfolie. Dicke der Folie ohne Schutzfolie 16 µm. Die Folie ist nicht mikroporös und enthält keine Metallbeschichtung. Befund: Es liegt eine andere Folie aus Additionspolymerisationserzeugnissen der Unterposition (KN) 3920 9959 vor.
Notes that govern this classification
Zu Unterposition 3920 99: 1. Rechteckige, in einer Pressform hergestellte Platten aus gehärtetem Casein, deren Ränder lediglich leicht abgeschrägt sind, um das Herausnehmen aus der Form zu erleichtern, mit dem offensichtlichen Charakter von Halberzeugnissen, die zu anderen Erzeugnissen verarbeitet werden sollen (z. B. zu Knopf-Rohlingen durch Ausschneiden oder Ausstanzen).
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgericht Hamburg vom 5. Juni 2002 Az.: IV 24/00 Aus den Gründen: ... Im Februar und März ... führte die Klägerin aus China Rettungsdecken aus Kunststoff ein. Diese Rettungsdecken sind zum Einsatz bei der Erste-Hilfe-Versorgung von Unfallopfern bestimmt, die in die Decken eingewickelt werden, damit der Körper nicht auskühlt. Es handelt sich um 0,2 mm dicke Folien in unterschiedlichen Größen (160 x 220 cm, 160 x 225 cm und 140 x 220 cm) bestehend aus Polyethylenterephtalat, die entweder beidseitig mit einer silbrigen Aluminiumschicht oder einseitig mit dieser Aluminiumschicht und auf der anderen Seite mit einer goldenen Lackschicht überzogen sind und die zusammengefaltet zu Paketen von ca. 14 cm Breite und 8,5 cm Länge gefaltet und in kleinen Plastiktüten verpackt geliefert werden. ... …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
- 3920.99.59.10For use in certain types of aircraft
- 3920.99.59.25Poly(1-chlorotrifluoroethylene) film
- 3920.99.59.65Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %
- 3920.99.59.90Other
Frequently asked questions
What does customs tariff code 3920.99.59 cover?
Code 3920.99.59 covers Of other plastics, aus Additionspolymerisationserzeugnissen, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3920.99.59?
The third-country duty rate for 3920.99.59 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3920.99.59?
The first six digits form the HS code: 392099. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3920.99.59 have?
3920.99.59 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3920.99.59 sit in the tariff?
3920.99.59 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials > 392099 Of other plastics. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3920.99.59?
Yes. The EBTI database holds decisions on 3920.99.59, for example CZBTI31/239937/2026-300000-ZI/01. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3920.99.59 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3920.99.59 to 1C010, 1C101, 9C110, 1A003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3920.99.59 change?
3920.99.59 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.