Customs tariff code 3921.90.55.40: Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta…
Reference data as at 1 July 2026
Customs tariff code 3921.90.55.40 covers Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m$2. The third-country duty rate is 6.5 %, plus import VAT.
3921.90.55.40 is TARIC code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3921.90.55.40
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3921Other plates, sheets, film, foil and strip, of plastics
- 3921.90Other
- 3921.90.55Other
- 3921.90.55.40Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m$2
From HS code to customs tariff code 3921.90.55.40
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A001aComponents made from fluorinated compounds, as follows:
- 1A003bManufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
- 1C210'Fibrous or filamentary materials' or prepregs, other than those specified in 1C010.a., .b. or .e., as follows:
- 1A003bManufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
- 1C010"Fibrous or filamentary materials", as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
FOGLIO RETTANGOLARE DI TESSUTO RIVESTITO DI MATERIA PLASTICA DI COLORE BIANCO. LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBI I LATI E' PERCEPIBILE A OCCHIO NUDO. PER DICHIARAZIONE DI PARTE IL PRODOTTO E' COSTITUITO DA UN TESSUTO DI TAFFETÀ' DI NYLON, RIVESTITO SU ENTRAMBI I LATI CON POLIAMMIDE, CON UNO SPESSORE NON SUPERIORE A 135 MICRON ED UN PESO TOTALE NON SUPERIORE A 61 +/-3 G/MQ. IL PRODOTTO SI PRESENTA IN ROTOLI.
FOGLIO DI TESSUTO RIVESTITO DI MATERIA PLASTICA DI COLORE BIANCO. LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBI I LATI E' PERCEPIBILE A OCCHIO NUDO. PER DICHIARAZIONE DI PARTE IL PRODOTTO E' COSTITUITO DA UN TESSUTO DI TAFFETÀ' DI NYLON, O NYLON/POLIESTERE, RIVESTITO SU ENTRAMBI I LATI CON POLIAMMIDE, CON UNO SPESSORE NON SUPERIORE A 135 MICRON ED UN PESO TOTALE NON SUPERIORE A 80G/MQ. IL PRODOTTO SI PRESENTA IN ROTOLI.
FOGLIO DI PLASTICA RETTANGOLARE DI COLORE BIANCO. AL TATTO SI PERCEPISCE LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBE LE FACCE. LA DITTA DICHIARA CHE IL PRODOTTO E' COSTITUITO DA UN FOGLIO DI TESSUTO A TRE STRATI, IN ROTOLI IN CUI LA PARTE CENTRALE E' COSTITUITA DA TAFFETÀ' DI NYLON, RIVESTITA CON POLIAMMIDE SU ENTRAMBI I LATI. LO SPESSORE COMPLESSIVO NON E' SUPERIORE A 135 MICRON E IL PESO TOTALE NON E' SUPERIORE A 80G/M².
FOGLIO DI PLASTICA RETTANGOLARE DI COLORE BIANCO. AL TATTO SI PERCEPISCE LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBE LE FACCE. LA DITTA DICHIARA CHE IL PRODOTTO E' COSTITUITO DA UN FOGLIO DI TESSUTO A TRE STRATI, IN ROTOLI IN CUI LA PARTE CENTRALE E' COSTITUITA DA TAFFETÀ' DI NYLON RIVESTITA CON POLIAMMIDE SU ENTRAMBI I LATI. LO SPESSORE COMPLESSIVO NON E' SUPERIORE A 135 MICRON E IL PESO TOTALE NON SUPERIORE A 80G/M².
FOGLIO RETTANGOLARE DI TESSUTO RIVESTITO DI MATERIA PLASTICA DI COLORE BIANCO. LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBI I LATI E' PERCEPIBILE AD OCCHIO NUDO. PER DICHIARAZIONE DI PARTE IL PRODOTTO E' COSTITUITO DA UN TESSUTO DI TAFFETÀ' DI NYLON, RIVESTITO SU ENTRAMBI I LATI CON POLIAMMIDE, CON UNO SPESSORE COMPLESSIVO NON SUPERIORE A 135 MICRON ED UN PESO TOTALE NON SUPERIORE A 80G/MQ. IL PRODOTTO SI PRESENTA IN ROTOLI.
FOGLIO DI TESSUTO RETTANGOLARE DI COLORE BIANCO SU AMBO LE SUPERFICI. AL TATTO SI PERCEPISCE LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBE LE FACCE. LA DITTA DICHIARA CHE IL PRODOTTO E’COSTITUITO DA UN FOGLIO DI TESSUTO A TRE STRATI, IN ROTOLI IN CUI LA PARTE CENTRALE E’ COSTITUITA DA TAFFETA’ DI NYLON, RIVESTITA DA AMBO I LATI CON POLIAMMIDE. LO SPESSORE COMPLESSIVO NON E’ SUPERIORE A 135 MICRON, E IL PESO TOTALE NON E’ SUPERIORE A 61+/- 3 G/M²0.
FOGLIO DI TESSUTO RIVESTITO DI MATERIA PLASTICA DI COLORE BIANCO SU AMBO LE FACCE. LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBI I LATI E’ PERCEPIBILE AD OCCHIO NUDO. PER DICHIARAZIONE DI PARTE IL PRODOTTO E’COSTITUITO DA UN TESSUTO DI TAFFETA’ DI NYLON, O NYLON/POLIESTERE, RIVESTITO SU ENTRAMBI I LATI CON POLIAMMIDE, CON UNO SPESSORE NON SUPERIORE A 135 MICRON ED UN PESO TOTALE NON SUPERIORE A 80G/MQ. IL PRODOTTO SI PRESENTA IN ROTOLI.
FOGLIO DI PLASTICA RETTANGOLARE DI COLORE BIANCO SU AMBO LE SUPERFICI. AL TATTO SI PERCEPISCE LA PRESENZA DI MATERIA PLASTICA SU ENTRAMBE LE FACCE. LA DITTA DICHIARA CHE IL PRODOTTO E’COSTITUITO DA UN FOGLIO DI TESSUTO A TRE STRATI, IN ROTOLI IN CUI LA PARTE CENTRALE E’ COSTITUITO DA TAFFETA’ DI NYLON, RIVESTITA DA ENTRAMBI I LATI CON POLIAMMIDE. LO SPESSORE COMPLESSIVO NON E’ SUPERIORE A 135 MICRON E IL PESO TOTALE NON E’ SUPERIORE A 80G/M².
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Tafeln, Platten, Filme, Folien, Bänder und Streifen aus Kunststoffen, andere als solche der Pos. 3918, 3919 oder 3920 oder des Kapitels 54. Zu dieser Position gehören somit nur Zellkunststoffwaren oder solche, die verstärkt, laminiert, unterlegt oder auf ähnliche Weise mit anderen Stoffen verbunden sind. (Bezüglich der Tarifierung von Tafeln, Platten, usw. in Verbindung mit anderen Stoffen gelten die Erläuterungen „Allgemeines“ zu diesem Kapitel). Im Sinne der Anmerkung 10 zu diesem Kapitel gelten als „Tafeln, Platten, Filme, Folien, Bänder und Streifen“ ausschließlich Tafeln, Platten, Filme, Folien, Bänder und Streifen und Blöcke von regelmäßiger geometrischer Form, auch bedruckt oder anders oberflächenbearbeitet (z. B. …
Zu Unterpositionen 3921 90 oder 3926 90: 1. Treibriemen oder Förderbänder aus einem Kunststoffband (aus einer oder mehreren zusammengeklebten Lagen bestehend), das auf einer oder beiden Seiten – nur zum besseren Haften – mit Chromleder überzogen ist. Zu Unterposition 3921 90: 2. Blätter, bestehend aus stark mit Melaminharz getränktem Papier, die, wenn sie gefaltet werden, wegen ihrer spröden Beschaffenheit brechen und die die wesentlichen Eigenschaften von Papier verloren haben. Die Blätter werden zum Herstellen von Laminaten verwendet. 3. Laminiertes Produkt aus Textil und Kunststoff, bestehend aus zwei Folien aus transparentem Polyethylen, die die zwei äußeren Schichten des laminierten Produkts bilden, und einer inneren Gewebeschicht oder Kern. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 2141/89 der Kommission vom 14. Juli 1989 (ABl. EG Nr. L 205/22) (RV L 2141/89), geändert durch Verordnung (EG) Nr. 705/2005 der Kommission vom 4. Mai 2005 (ABl. EU Nr. L 118/18): 1. Leichtplatten, quadratisch oder rechteckig, hergestellt aus einer Platte expandierten Polystyrols, beidseitig mit einem Blatt Papier bedeckt. Die Gesamtdicke des Papiers macht weniger als 10 v. H. der Gesamtdicke der Ware aus. Unterposition 3921 1100 Verordnung (EWG) Nr. 314/90 der Kommission vom 5. Februar 1990 (ABl. EG Nr. L 35/9) (RV L 314/90), geändert durch Verordnung (EG) Nr. 705/2005 der Kommission vom 4. Mai 2005 (ABl. EU Nr. L 118/18): 6. Rechteckige 4–16 mm dicke Schaumstoffplatten aus ca. 60 % Copolymeren des Ethylen-Vinylacetats (gesättigt) sowie 40 % Füllstoffen und Pigmenten. …
Urteil des Gerichts der Europäischen Union (2. Kammer) vom 10. Juni 2026 in der Rechtssache T-304/25: Eine zusammengesetzte Ware, die aus einer mit duroplastischen Harzen imprägnierten Lage Dekorpapier und zwei Decklagen aus reinem Harz besteht, wobei die Harze nicht vollständig ausgehärtet sind, und zur Beschichtung von Platten in Mehretagen-Heizpressen mit Kurztakt-Verfahren verwendet wird, fällt unter die KN-Position 3921, sofern der Kunststoff dieser Ware ihren wesentlichen Charakter verleiht. Für die Bestimmung des Charakters relevante Merkmale können für eine solche Ware u.a. ihre Härte, ihre Brüchigkeit sowie ihre Wasserundurchlässigkeit, Hitzebeständigkeit und Kratzfestigkeit darstellen (vgl. Rz. 71 des Urteils). (Stand: 29.07.2026)
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3921.90.55.40 cover?
Code 3921.90.55.40 covers Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m$2. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3921.90.55.40?
The third-country duty rate for 3921.90.55.40 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3921.90.55.40?
The first six digits form the HS code: 392190. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3921.90.55.40 have?
3921.90.55.40 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 3921.90.55.40 sit in the tariff?
3921.90.55.40 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3921 Other plates, sheets, film, foil and strip, of plastics > 392190 Other > 39219055 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3921.90.55.40?
Yes. The EBTI database holds decisions on 3921.90.55.40, for example ITBTI2019-0091T-025100. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3921.90.55.40 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3921.90.55.40 to 1A001a, 1A003b, 1C210, 1A003b, 1C010. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3921.90.55.40 change?
3921.90.55.40 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.