Customs tariff code

Customs tariff code 4009.22: With fittings

Reference data as at 1 July 2026

Customs tariff code 4009.22 covers With fittings. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.

4009.22 is HS subheading in the EU customs tariff, in chapter 40. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
4009.22
Third-country duty
See subdivision
Declarable
No
Binding rulings
1

Where this code sits in the tariff

  1. 40RUBBER AND ARTICLES THEREOF
  2. 4009Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges)
  3. 4009.22With fittings

From HS code to customs tariff code 4009.22

HS code4009.226 digits, uniform worldwide

Duty rates and preferences

OriginDuty rateBasis
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
San Marino0 %Customs Union Duty
Türkiye0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference
OCTs (Overseas Countries and Territories)0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Binding tariff information for this code

HUT12014007956Issued by HUValid until 2018-05-03

Zuhany-gégecső. A termék a jogosult nyilatkozata alapján 1,5 m hosszú, hengerelt csavarvonalú, rozsdamentes acélszalagból készült, két végén összeerősített, sárgaréz csatlakozókat tartalmazó hajlékony cső. A cső belső része gumiból (EPDM) készült. Összetétele anyag szerint: 5 % gumi, 40 % sárgaréz, 55 % rozsdamentes acél. Felhasználási cél: Zuhany és kádtöltő csaptelepek tartozéka, csak ezzel együtt működnek ezek a csaptelepek funkcionálisan. Külső (érzékszervi vizsgálat): A beérkezett tasakban 1 db minta található. A minta ezüstszínű hajlékony cső, két végén belső menetes csatlakozóval. Az egyik csatlakozó hatlapfejű, a másik csatlakozó hengeres alakú, a menetes része felé enyhén szélesedik, a kisebb átmérőjű végén két, egymással szemközt lévő levágás van kialakítva. A hengeres csatlakozó oldalában egy nút van kialakítva, amibe egy rugalmas gyűrű van behelyezve. A minta belseje egy 8 mm átmérőjű fekete rugalmas cső, két végén barna színű, kis peremmel kialakított műanyag véggel. A rugalmas cső egy lemezszalagból spirálisan kialakított hajlékony cső burkolatba van helyezve, a spirál a barna műanyag részig tart, a maradék 1,7 cm hosszú részen egy fém lemezhenger található, végén kis peremmel. A minta méretei: hossza: 156 cm, spirál cső átmérője: 1,4 cm, legnagyobb átmérője: 2,3 cm. Analitikai vizsgálatok: A minta belső része (fekete rugalmas cső): EPDM gumi szervetlen töltőanyaggal (FT-IR vizsgálat); térhálós szerkezetű, vulkanizált gumi (TGA vizsgálat). A minta külső spirális része: AAS vizsgálat: A minta fő komponense Fe, a minta krómtartalma 16,5%. A minta két csatlakozója: AAS vizsgálat: A minta fő komponensei Cu és Zn.

Notes that govern this classification

Pos. 4009

Zu Unterpositionen 4009 22 00: Siehe die Erläuterungen zu den Unterpositionen 4009 12 00.

Pos. 4009

Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Rohre und Schläuche, die ganz aus Weichkautschuk bestehen und vulkanisierte „Gummischläuche“, Rohre und Schläuche (einschließlich Schlauchleitungen), die durch Schichtung verstärkt sind und beispielsweise aus einer oder mehreren „Lagen“ bestehen, z. B. verstärkt durch eine oder mehrere Gewebelagen oder durch eine oder mehrere Lagen aus parallel liegenden textilen Garnen oder Metalldrähten, die in den Kautschuk eingebettet sind. Diese Rohre und Schläuche können ferner außen mit einem Überzug aus dünnem Gewebe versehen oder mit Spinnstoffen umwickelt oder umsponnen sein. Sie können auch außen oder innen oder in der Masse mit einer Drahtspirale versehen sein. …

Kapitel 40

1. Als „Kautschuk" im Sinne der Nomenklatur gelten, wenn nichts anderes bestimmt ist, die folgenden Erzeugnisse, auch weich oder hart vulkanisiert: Naturkautschuk, Balata, Guttapercha, Guayule, Chicle und ähnliche natürliche Kautschukarten; synthetischer Kautschuk, Faktis und deren Regenerate (RV E4001000). 2. Zu Kapitel 40 gehören nicht: a) Waren des Abschnittes XI (Spinnstoffe und Waren daraus) (RV E4002A00); b) Schuhe und Schuhteile des Kapitels 64 (RV E4002B00); c) Kopfbedeckungen und Teile davon (einschließlich Badekappen) des Kapitels 65 (RV E4002C00); d) Hartkautschukteile für Maschinen, mechanische oder elektrische Apparate sowie alle Gegenstände und Teile aus Hartkautschuk zu elektrotechnischen Zwecken des Abschnitts XVI (RV E4002D00); e) Waren des Kapitels 90, 92, 94 oder 96 (RV E4002E00); f) Waren des Kapitels 95, ausgenommen Fingerhandschuhe, Handschuhe ohne Fingerspitzen und …

Abschnitt VII

1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 4009.22 cover?

Code 4009.22 covers With fittings. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 4009.22?

TARIC holds no third-country rate of its own for 4009.22. The rate follows from the declarable commodity code beneath it.

What is the HS code for 4009.22?

The first six digits form the HS code: 400922. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 4009.22 have?

4009.22 has six digits and matches the globally uniform HS subheading. A German import declaration requires the eleven-digit commodity code.

Where does 4009.22 sit in the tariff?

4009.22 sits in this hierarchy: 40 RUBBER AND ARTICLES THEREOF > 4009 Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges). The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 4009.22?

Yes. The EBTI database holds decisions on 4009.22, for example HUT12014007956. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Does customs tariff code 4009.22 change?

4009.22 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.