Customs tariff code 4009.42.00: With fittings, mit anderen Stoffen verstärkt oder in Verbindung mit anderen Stoffen…
Reference data as at 1 July 2026
Customs tariff code 4009.42.00 covers With fittings, mit anderen Stoffen verstärkt oder in Verbindung mit anderen Stoffen, mit Formstücken, Verschlussstücken oder Verbindungsstücken. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
4009.42.00 is CN code in the EU customs tariff, in chapter 40. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 4009.42.00
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 40RUBBER AND ARTICLES THEREOF
- 4009Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges)
- 4009.42With fittings
- 4009.42.00With fittings, mit anderen Stoffen verstärkt oder in Verbindung mit anderen Stoffen, mit Formstücken, Verschlussstücken oder Verbindungsstücken
From HS code to customs tariff code 4009.42.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| San Marino | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B002eSpecially designed or prepared auxiliary systems, equipment and components as follows, for isotope separation plant specified in 0B001, made of or protected by "materials resistant to corrosion by UF 6 ":
- 2B350hChemical manufacturing facilities, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Dle deklarovaných údajů se jedná o brzdovou hadici pro motorová vozidla. Hadice je zhotovena z kaučuku (EPDM), je kombinována s jinými materiály a je opatřena koncovkami (příslušenstvím). Vnější kaučuková vrstva je zesílena textilním materiálem, vnitřní vrstva je kombinována s plastovou "pružinou". Vnější část je opatřena dvěma posuvnými ochrannými návleky z kaučuku (EPDM) a kovovým posuvným návlekem k připevnění hadičky. Výrobek slouží k propojení pevného brzdového potrubí s brzdovými třmeny. Materiál: kaučuk (EPDM); textilní výztuha; plastová "pružina" (polyamid); kov.
Łącznik amortyzacyjny - kompensator gumowy gwintowany. Składa się z korpusu wykonanego z EPDM, wzmocnionego nylonem, zakończonego dwustronnie przyłączem wykonanym ze stali galwanizowanej. Służy do tłumienia i kompensacji drgań, zmian długości instalacji, redukcji hałasu i tym podobnych. Przeznaczony do łączenia z przemysłowymi częściami mechanicznymi, które wibrują i poruszają się w systemach instalacji wodnych i innych cieczy, pompowych i urządzeniach do ogrzewania i klimatyzacji. Zakres stosowanych średnic nominalnych od DN 15 do DN 80 [mm].
Dle poskytnutých údajů se jedná o brzdovou hadici pro motorová vozidla. Hadice je zhotovena z kaučuku (EPDM), je kombinována s jinými materiály a je opatřena koncovkami (příslušenstvím). Vnější kaučuková vrstva je zesílena textilním materiálem, vnitřní vrstva je kombinována s plastovou "pružinou". Vnější část je opatřena dvěma posuvnými ochrannými návleky z kaučuku (EPDM) a kovovým posuvným návlekem k připevnění hadičky. Výrobek slouží k propojení pevného brzdového potrubí s brzdovými třmeny. MATERIÁL: kaučuk (EPDM); textilní výztuha; plastová "pružina" (polyamid); kov.
Manguera de goma NBR (caucho de nitrilo-butadieno) con tubo interior liso negro, refuerzo de hilo textil, hélice de acero incrustado y alambre de cobre para asegurar la continuidad eléctrica, cubierta de goma. Incorpora una brida y un conector rápido “stab”. Forma parte de un equipo llamado “ROV panel” y se utiliza para la extracción de agua de otros equipos adicionales, los “suction piles” que forman parte del conjunto llamado SPLAS para reparación de un gasoducto submarino en Mar Negro.
Dle deklarovaných údajů a předložené fotodokumentace se jedná o nezpevněnou hadici z vulkanizovaného kaučuku, s příslušenstvím, určenou pro palivový systém automobilu. Výrobek je kombinovaný s ochranným návlekem z chemických vláken, na koncích osazen ocelovými svorkami a z jedné strany vybaven plastovou koncovkou. Rozměry: - délka: 332 mm; - vnitřní průměr 8,9 mm (+/- 0,3 mm); - tloušťka stěny 3,5 mm (+/- 0,4 mm).
Dle deklarovaných údajů se jedná o hadici z vulkanizovaného kaučuku, zpevněnou mezi dvěma vrstvami pryže vysokopevnostním aramidovým vláknem. Hadici zakončuje z jedné strany plastový konektor. Výrobek je určen pro chladící systém v automobilu, a je na něm navléknuto jednodílné sklolaminátové pouzdro, které je nalaminováno na hliníkovou fólii. Pouzdro se používá k ochraně výrobku v oblastech s vysokou teplotou. Rozměry: - délka před tvarováním: 989 mm; - vnitřní průměr 8 mm (-0,5/-1,0 mm); - tloušťka stěny 3,5 mm (+/- 0,4 mm); - délka pouzdra 280 mm.
Dle deklarovaných údajů se jedná o hadici z vulkanizovaného kaučuku, jenž je mezi dvěma vrstvami pryže zpevněná vysokopevnostním aramidovým vláknem. Povrch hadice je pro ochranu a zpevnění potažen návlekem z polyolefinu a výrobek je dále opatřen pryžovým "ježkem" pro vymezení vzdálenosti od jiných komponentů. Hadice je určena pro chladící systém v automobilovém průmyslu. Rozměry (mm): délka před tvarováním 365, vnitřní průměr 7,2, tloušťka stěny 3,1.
Dle deklarovaných údajů se jedná o brzdovou hadici z vulkanizovaného kaučuku (pryže), která je zpevněna uvnitř tkaninou a na vnějším povrchu spirálovitě ovinutým drátem (pružinou). Hadice je opatřena příslušenstvím z obecného kovu (koncovka s vnitřním závitem, koncovka s vyústěním a objímkou, držáky k upevnění). Účel použití: výrobek je určen pro průmyslovou montáž osobních automobilů.
Notes that govern this classification
Zu Unterpositionen 4009 42 00: Siehe die Erläuterungen zu den Unterpositionen 4009 12 00.
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Rohre und Schläuche, die ganz aus Weichkautschuk bestehen und vulkanisierte „Gummischläuche“, Rohre und Schläuche (einschließlich Schlauchleitungen), die durch Schichtung verstärkt sind und beispielsweise aus einer oder mehreren „Lagen“ bestehen, z. B. verstärkt durch eine oder mehrere Gewebelagen oder durch eine oder mehrere Lagen aus parallel liegenden textilen Garnen oder Metalldrähten, die in den Kautschuk eingebettet sind. Diese Rohre und Schläuche können ferner außen mit einem Überzug aus dünnem Gewebe versehen oder mit Spinnstoffen umwickelt oder umsponnen sein. Sie können auch außen oder innen oder in der Masse mit einer Drahtspirale versehen sein. …
1. Als „Kautschuk" im Sinne der Nomenklatur gelten, wenn nichts anderes bestimmt ist, die folgenden Erzeugnisse, auch weich oder hart vulkanisiert: Naturkautschuk, Balata, Guttapercha, Guayule, Chicle und ähnliche natürliche Kautschukarten; synthetischer Kautschuk, Faktis und deren Regenerate (RV E4001000). 2. Zu Kapitel 40 gehören nicht: a) Waren des Abschnittes XI (Spinnstoffe und Waren daraus) (RV E4002A00); b) Schuhe und Schuhteile des Kapitels 64 (RV E4002B00); c) Kopfbedeckungen und Teile davon (einschließlich Badekappen) des Kapitels 65 (RV E4002C00); d) Hartkautschukteile für Maschinen, mechanische oder elektrische Apparate sowie alle Gegenstände und Teile aus Hartkautschuk zu elektrotechnischen Zwecken des Abschnitts XVI (RV E4002D00); e) Waren des Kapitels 90, 92, 94 oder 96 (RV E4002E00); f) Waren des Kapitels 95, ausgenommen Fingerhandschuhe, Handschuhe ohne Fingerspitzen und …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
- 4009.42.00.10Suitable for conducting gases or liquids, for use in civil aircraft
- 4009.42.00.20Rubber brake hose with - textile strings, - a wall thickness of 3,2 mm, - a metal hollow terminal pressed on both ends, and - one or more mounting brackets, for use in the manufacture of goods of Chapter 87
- 4009.42.00.90Other
Frequently asked questions
What does customs tariff code 4009.42.00 cover?
Code 4009.42.00 covers With fittings, mit anderen Stoffen verstärkt oder in Verbindung mit anderen Stoffen, mit Formstücken, Verschlussstücken oder Verbindungsstücken. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 4009.42.00?
TARIC holds no third-country rate of its own for 4009.42.00. The rate follows from the declarable commodity code beneath it.
What is the HS code for 4009.42.00?
The first six digits form the HS code: 400942. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 4009.42.00 have?
4009.42.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 4009.42.00 sit in the tariff?
4009.42.00 sits in this hierarchy: 40 RUBBER AND ARTICLES THEREOF > 4009 Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges) > 400942 With fittings. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 4009.42.00?
Yes. The EBTI database holds decisions on 4009.42.00, for example CZBTI34/137187/2026-300000-ZI/01. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 4009.42.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 4009.42.00 to 0B002e, 2B350h. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 4009.42.00 change?
4009.42.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.