Customs tariff code 4409.10.18: Other
Reference data as at 1 July 2026
Customs tariff code 4409.10.18 covers Other. The third-country duty rate is 0 %, plus import VAT.
4409.10.18 is CN code in the EU customs tariff, in chapter 44. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 4409.10.18
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 44WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL
- 4409Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
- 4409.10Coniferous
- 4409.10.18Other
From HS code to customs tariff code 4409.10.18
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Ēvelēti kokmateriāli no priedes, 45 x 90 x 2500 mm, ar vienu vai vairākām 20 x 20 mm gropēm visā garumā. Atbilstoši pieteicēja sniegtajai informācijai tos paredzēts dārza mājiņu, nojumju konstrukciju izveidei, rievās ievietojot sienām paredzētos kokmateriālus.
Profil w kształcie daszka, o jednorodnym przekroju poprzecznym na całej długości, wykonany z litego drewna sosnowego. Poddany procesowi suszenia, strugania i szlifowania. Zgodnie z deklaracją wnioskodawcy wykorzystywany jako element wykończeniowy łóżka. Wymiary produktu: długość 1800 mm, szerokość 85 mm, wysokość 40 mm.
Pfeilschaft - Rundstab aus massivem Nabelholz (lt. Antragsteller Port Orford Cedar, Zypresse, - Chamaecyparis lawsoniana), mit einer Länge von 610 - 813 mm und einem Durchmesser von 7,9 bzw. 8,7 mm, - wird bei der Herstellung von Pfeilen verwendet. (Abbildung s. Anlage) "Nadelholz, entlang einer oder mehrerer Kanten, Enden oder Flächen profiliert (gerundet), keine Leisten für Rahmen; sog. Pfeilschaft"
Terassenbelag, sibirische Lärche - Massivholzbretter aus Nadelholz (sibirische Lärche, lt. Antragsteller), rechteckig, entlang aller Längsseiten gerundet / gefast, - Oberfläche gehobelt, - Ober- und Unterseite fein geriffelt (gerillt, gekehlt somit profiliert), - in unterschiedlichen Längen und Breiten, - soll als Terassenbeleg / -diele verwendet werden. (Abbildung siehe Anlage) "Nadelholz, entlang einer oder mehrerer Kanten, Enden oder Flächen profiliert (gerillt, gekehlt), gehobelt, keine Leisten für Rahmen für Bilder, Fotografien, Spiegel oder dergleichen; sog. Terassenbelag"
Sibirische Lärche Terassenbelag - rechteckige Massivholzbretter aus Nadelholz (Lärche, laut Antragsteller), entlang der Längs- seiten genutet, Oberseite und Unterseite geriffelt/gerillt (somit profiliert), - in Längen von 250 bis 600 cm, mit Breite von 14 cm sowie Dicke/Stärke von 2,7 cm, - soll als Terrassenbelag/-diele verwendet werden. (Abbildung siehe Anlage) "Nadelholz, entlang einer oder mehrerer Kanten oder Flächen profiliert (gerillt, genutet), keine Leisten für Rahmen für Bilder, Fotografien, Spiegel oder dergleichen"
Listones rectangulares de madera de conífera con unas dimensiones de 180 x 11 x 3,5 centímetros que se presentan únicamente lijados y perfilados longitudinalmente (presenta los cantos redondeados).
Listwa wykonana z drewna sosnowego, strugana wzdłużnie, o jednorodnym przekroju poprzecznym. Cztery krawędzie listwy zostały ścięte pod kątem prostym do płaszczyzny na całej jej długości. Przeznaczona do wykonania podstawy pod materac. Dostępne wymiary: 15 x 67 x 743 mm, 15 x 67 x 843 mm, 15 x 67 x 993 mm, 15 x 67 x 1143 mm, 15 x 67 x 1343 mm, 15 x 67 x 1543 mm.
"Dielenbretter" - Massivholzbretter aus Nadelholz (Fichte, Tanne, Kiefer, Lärche, lt. Antragsteller), rechteckig, entlang aller Seiten profiliert (genutet, gefedert), - mit ein bis drei Dehnungsschnitten an der Unterseite versehen, - Oberfläche gehobelt und/oder geschliffen, - Abmessungen: Breite 120 bis 250 mm, Dicke 20 bis 50 mm, Länge bis 6000 mm, - zur Bau von Fussböden oder Beplankung von Gebäuden. "Nadelholz, entlang einer oder mehrerer Kanten, Enden oder Flächen profiliert (genutet und gefedert), gehobelt, geschliffen, keine Leisten für Rahmen für Bilder, Fotografien, Spiegel oder dergleichen; sog. Dielenbretter"
Notes that govern this classification
Zu Unterposition 4409 10 18: Hierher gehören z. B.: 1. Holzdraht und Rundstäbe für Dübel, die in den Erläuterungen zu Pos. 4409 des HS, fünfter Absatz Ziffer 5), beschrieben sind; 2. profilierte (z. B. genutete und gekehlte) Stäbe und Friese für Parkett. Stäbe und Friese, nur gehobelt, geschliffen oder an den Enden verbunden, gehören zu Position 4407 oder 4408. Stäbe und Friese aus Sperrholz oder furniertem Holz gehören zu Position 4412.
Zu Unterpositionen 4409 10 bis 4409 29: 1. Friese für Parkett, nicht zusammengesetzt, etwa 4o cm lang x 6 cm breit und 2 cm dick, hergestellt aus massivem Holz, mit einer gefederten Seite (Länge) und der gegenüberliegenden genuteten Seite. Die Enden (Breite) sind ebenfalls bearbeitet und haben eine gefederte und genutete Kante.
1. Zu Kapitel 44 gehören nicht: a) Holz in Form von Spänen, Plättchen oder Schnitzeln, zerkleinert, gemahlen oder pulverisiert, von der hauptsächlich zur Riechmittelherstellung oder zu Zwecken der Medizin, Insektenvertilgung, Schädlingsbekämpfung und dergleichen verwendeten Art (Position 1211) (RV E4401A00); b) Bambus oder andere holzige Stoffe von der hauptsächlich zum Herstellen von Korb- oder Flechtwaren verwendeten Art, roh, auch gespalten, in der Längsrichtung gesägt oder auf Längen zugeschnitten (Position 1401) (RV E4401B00); c) Holz in Form von Spänen, Plättchen oder Schnitzeln, gemahlen oder pulverisiert, von der hauptsächlich zum Färben oder Gerben verwendeten Art (Position 1404) (RV E4401C00); d) Aktivkohle (Position 3802) (RV E4401D00); e) Waren der Position 4202 (RV E4401E00); f) Waren des Kapitels 46 (RV E4401F00); g) Schuhe und Teile davon des Kapitels 64 (RV E4401G00); h) …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 4409.10.18 cover?
Code 4409.10.18 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 4409.10.18?
The third-country duty rate for 4409.10.18 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 4409.10.18?
The first six digits form the HS code: 440910. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 4409.10.18 have?
4409.10.18 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 4409.10.18 sit in the tariff?
4409.10.18 sits in this hierarchy: 44 WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL > 4409 Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed > 440910 Coniferous. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 4409.10.18?
Yes. The EBTI database holds decisions on 4409.10.18, for example LVBTILV009999-2023-BTI41. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 4409.10.18 in scope of the EUDR?
Yes. 4409.10.18 appears in Annex I of the EU deforestation regulation (commodity wood). A due diligence statement and geolocation data for the plots of production are required.
Does customs tariff code 4409.10.18 change?
4409.10.18 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.