Customs tariff code 4410.11.90: Other
Reference data as at 1 July 2026
Customs tariff code 4410.11.90 covers Other. The third-country duty rate is 7 %, plus import VAT.
4410.11.90 is CN code in the EU customs tariff, in chapter 44. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 4410.11.90
- Third-country duty
- 7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 4410.11.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Spanplatten aus Holz, auch mit Harz oder anderen organischen Bindemitteln hergestellt. In Form von 3-Schicht Holzspanplatten, beidseitig kunststoffbeschichtet (Schauseite kunststoffbeschichtete Metallfolie, Unterseite weiß), in diversen Abmessungen und Stärken zur Abfertigung gestellt. (Angaben laut Antragsteller, Abbildung siehe Anlage)
"Sandwich Board Type 39 S3R" - aus drei Lagen Spanplatte aus Holz (mit jeweils 11 mm Dicke), auf beiden Außenseiten mit einer 3 mm starken Gummikorkplatte belegt und durch Klammerung miteinander verbunden, - zur Verwendung als Spezialeinlage für Türen mit Schall- und Feuerschutzfunktion. (Abbildung siehe Anlage) Der Charakter der zusammengesetzten Ware wird aufgrund des Umfangs (Dicke) durch die Spanplatten aus Holz bestimmt. "Spanplatte aus Holz, andere als in den UPos 4410 11 10 bis 4410 11 50 genannt, (zusammengesetzte Ware aus Spanplatten aus Holz - charakterbestimmend - Kork und Gummi); sog. Sandwich Platten"
"Sandwich Board Type 38 S3K" - aus drei Lagen Spanplatte aus Holz (mit jeweils 10,6 mm Dicke), auf beiden Außenseiten mit einer 3 mm starken Korkplatte belegt und durch Klammerung oder Punktverleimung miteinander verbunden, - zur Verwendung als Spezialeinlage für Türen mit Schallschutzfunktion. (Abbildung siehe Anlage) Der Charakter der zusammengesetzten Ware wird aufgrund des Umfangs (Dicke) durch die Spanplatten aus Holz bestimmt. "Spanplatte aus Holz, andere als in den UPos 4410 11 10 bis 4410 11 50 genannt, (zusammengesetzte Ware aus Spanplatten aus Holz - charakterbestimmend - und Kork); sog. Sandwich Platten"
"Stapelholz für Rigipsplatten" - stranggepresste Spanplatte aus Holz in Form von quaderförmigen Blöcken, jeweils 50 mm stark, in Längen von 85 bis 120 cm, mit Höhen von 70, 75 und 90 cm, mit mehreren durchgehend röhrenförmigen Hohlräumen, mit abgeschrägten Kanten auf der Unterseite, auf der Oberseite mit einer Lage Schrenzpapier beschichtet, - zur Verwendung als Stapelholz für Rigipsplatten. (Abbildung siehe Anlage) Der Charakter der zusammengesetzten Ware wird aufgrund des Umfangs (Dicke) und der Bedeutung für die Verwendung durch die Spanplatten aus Holz bestimmt. "Spanplatte aus Holz, nicht von den UPos 4410 11 10 bis 4410 11 50 erfasst (zusammengesetzte Ware aus Spanplatten aus Holz - charakterbestimmend - und Papier); sog. Stapelholz"
Spånskiva Rektangulär spånskiva, med måtten längd 59 cm, bredd 24 cm och tjocklek 1,5 cm. Skivan är belagd, enligt uppgift med pappersfolie, på över- och undersidor, kortsidor och en långsida samt avsedd att användas som hyllplan.
Spånskiva Rektangulär spånskiva, med måtten längd 59 cm, bredd 24 cm och tjocklek 1,5 cm. Skivan är belagd, enligt uppgift med pappersfolie, på över- och undersidor, kortsidor och en långsida samt avsedd att användas som hyllplan.
Spånskiva Rektangulär spånskiva, med måtten längd 59 cm, bredd 24 cm och tjocklek 1,5 cm. Skivan är belagd, enligt uppgift med pappersfolie, på över- och undersidor, kortsidor och en långsida samt avsedd att användas som hyllplan.
Spånskiva Rektangulär spånskiva, med måtten längd 59 cm, bredd 24 cm och tjocklek 1,5 cm. Skivan är belagd, enligt uppgift med pappersfolie, på över- och undersidor, kortsidor och en långsida samt avsedd att användas som hyllplan.
Notes that govern this classification
Zu Unterposition 4410 11 90: Hierher gehören z.B. Spanplatten, die mit Kunststoffen, Farbe, Papier, Spinnstoffen oder Metall beschichtet sind, ausgenommen solche der Unterpositionen 4410 11 30 und 4410 11 50.
Zu Unterposition 4410 11: Lagenholzplatte bestehend aus drei Lagen von Spanplatten, zu einer runden Form geschnitten (900 mm Durchmesser und 25 mm dick), auf der Ober- und Unterseite mit melaminharzbeschichtetem Papier überzogen. Die seitlichen Kanten sind mit einem 2 mm dicken poly(vinyl chlorid) (PVC) Band überzogen. Das Erzeugnis weist in der vorliegenden Form keine Merkmale auf, die darauf hinweisen, dass es mit einem anderen Erzeugnis kombiniert werden soll oder die dessen Verwendung z. B. als Teil eines Tisches erkennen lassen. Anwendung der Allgemeinen Vorschriften 1 und 6
1. Zu Kapitel 44 gehören nicht: a) Holz in Form von Spänen, Plättchen oder Schnitzeln, zerkleinert, gemahlen oder pulverisiert, von der hauptsächlich zur Riechmittelherstellung oder zu Zwecken der Medizin, Insektenvertilgung, Schädlingsbekämpfung und dergleichen verwendeten Art (Position 1211) (RV E4401A00); b) Bambus oder andere holzige Stoffe von der hauptsächlich zum Herstellen von Korb- oder Flechtwaren verwendeten Art, roh, auch gespalten, in der Längsrichtung gesägt oder auf Längen zugeschnitten (Position 1401) (RV E4401B00); c) Holz in Form von Spänen, Plättchen oder Schnitzeln, gemahlen oder pulverisiert, von der hauptsächlich zum Färben oder Gerben verwendeten Art (Position 1404) (RV E4401C00); d) Aktivkohle (Position 3802) (RV E4401D00); e) Waren der Position 4202 (RV E4401E00); f) Waren des Kapitels 46 (RV E4401F00); g) Schuhe und Teile davon des Kapitels 64 (RV E4401G00); h) …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 4410.11.90 cover?
Code 4410.11.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 4410.11.90?
The third-country duty rate for 4410.11.90 is 7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 4410.11.90?
The first six digits form the HS code: 441011. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 4410.11.90 have?
4410.11.90 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 4410.11.90 sit in the tariff?
4410.11.90 sits in this hierarchy: 44 WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL > 4410 Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances > 441011 Particle board. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 4410.11.90?
Yes. The EBTI database holds decisions on 4410.11.90, for example ATBTI2019000668-0. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 4410.11.90 in scope of the EUDR?
Yes. 4410.11.90 appears in Annex I of the EU deforestation regulation (commodity wood). A due diligence statement and geolocation data for the plots of production are required.
Does customs tariff code 4410.11.90 change?
4410.11.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.