Customs tariff code 4412: Sperrholz, furniertes Holz und ähnliches Lagenholz
Reference data as at 1 July 2026
Customs tariff code 4412 covers Sperrholz, furniertes Holz und ähnliches Lagenholz. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
4412 is heading in the EU customs tariff, in chapter 44. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 4412
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 44WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL
- 4412Sperrholz, furniertes Holz und ähnliches Lagenholz
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterposition 4412 94 10 und 4412 94 90 1): Wegen der Begriffe „Block-, Stab-, Stäbchen- oder Streifenholzmittellage“ siehe die Erläuterungen zu Pos. 4412 des HS, erster Absatz Ziffer 3) erster Gedankenstrich. 1) Anmerkung: ab 1.1.2022 zutreffende KN-Codes 4412 51 10 bis 4412 59 00
Zu Unterpositionen 4412 10, 4412 31, 4412 33, 4412 34 und 4412 39: Sperrholz verbleibt in diesen Unterpositionen, auch wenn es auf der Oberfläche überzogen oder weitergehend – wie im vorvorletzten Absatz der Erläuterungen zu Pos. 4412 beschrieben – bearbeitet ist. Zu Unterpositionen 4412 41, 4412 42 und 4412 49: Furnierschichtholz (FSH) ist ein Holzwerkstoffverbund, der zum Bau von Konstruktionen verwendet wird und ein hohes Verhältnis von Festigkeit zu Gewicht aufweist. Dieses Produkt ist jedoch nicht dafür ausgelegt, die strukturelle Last eines Gebäudes zu tragen. Es besteht aus Lagen aus Holzfurnierblättern, wobei die Holzfasern der äußeren Furnierblätter und der meisten oder aller anderen Furnierblätter parallel zur Längsachse verlaufen (z.B. aufeinanderfolgende Furniere). Die Stämme werden zu dünnen Furnierblättern geschält und unter Hitze und Druck miteinander verleimt. …
Zu Unterposition 4412 59 oder 4412 99: 1. Rechteckige Stücke aus Lagenholz (213 cm lang x 11,26 cm breit x 23,8 mm dick), die zur Herstellung eines Türrahmens bestimmt sind. Das Erzeugnis besteht aus einem dicken Kern und zwei dünnen äußeren Lagen aus Nadelholz, entlang beider Kanten genutet, um eine Zarge und auf einer Oberfläche einen Anschlag zu befestigen. Es ist beabsichtigt, das Erzeugnis auf Größe zu schneiden, nachdem die Türzarge und der Anschlag in den Nuten befestigt worden sind, so dass ein fertiger Türrahmen entsteht. Anwendung der Anmerkung 4 zu Kapitel 44. Anwendung der AV 1 und 6
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 3829/86 in der Fassung der VO (EWG) Nr. 2080/91 der Kommission vom 16. Juli 1991 (ABl. EG Nr. L 193/6) (RV L 2080/91): Sperrholzplatten, 1981 bis 2 400 mm lang, 762 bis 1 220 mm breit und etwa 44 mm dick, die aus einem Kern, der zwischen zwei dreischichtigen Furnierplatten liegt, bestehen. Beide Längsseiten (ggf. furniert) und eine oder auch beide Breitseiten (ggf. furniert) bestehen jeweils im Wesentlichen aus einem Stück Holz, Kantenleiste genannt. Die Sperrholzplatten weisen keine weitere Bearbeitung auf. Position 4412 Verordnung (EG) Nr. 1199/2005 der Kommission vom 22. Juli 2005 (ABl. EU Nr. L 195/3) (RV L 1199/2005), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. …
Subdivisions of this code
- 4412.10Of bamboo
- 4412.31With at least one outer ply of tropical wood
- 4412.33Other, with at least one outer ply of non-coniferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.) chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.) oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.) robinia (Robinia spp.) tulipwood (Liriodendron spp.) or walnut (Juglans spp.)
- 4412.34Other, with at least one outer ply of non-coniferous wood not specified under subheading 4412 33
- 4412.39Other, with both outer plies of coniferous wood
- 4412.41With at least one outer ply of tropical wood
- 4412.42Other, with at least one outer ply of non-coniferous wood
- 4412.49Other, with both outer plies of coniferous wood
- 4412.51With at least one outer ply of tropical wood
- 4412.52Other, with at least one outer ply of non-coniferous wood
- 4412.59Other, with both outer plies of coniferous wood
- 4412.91With at least one outer ply of tropical wood
- 4412.92Other, with at least one outer ply of non-coniferous wood
- 4412.99Other, with both outer plies of coniferous wood
Frequently asked questions
What does customs tariff code 4412 cover?
Code 4412 covers Sperrholz, furniertes Holz und ähnliches Lagenholz. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 4412?
TARIC holds no third-country rate of its own for 4412. The rate follows from the declarable commodity code beneath it.
What is the HS code for 4412?
The first six digits form the HS code: 4412. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 4412 have?
4412 has four digits and identifies a Harmonised System heading. A German import declaration requires the eleven-digit commodity code.
Where does 4412 sit in the tariff?
4412 sits in this hierarchy: 44 WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 4412?
The EBTI database currently holds no valid decisions on 4412. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 4412 in scope of the EUDR?
Yes. 4412 appears in Annex I of the EU deforestation regulation (commodity wood). A due diligence statement and geolocation data for the plots of production are required.
Does customs tariff code 4412 change?
4412 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.